Access to proxy user on iPad with Webaccess

We now have GW2014SP1, and when we use an iPad to access Webmail (webaccess). There is no functionality to change to another user (proxy account). Does anyone now if this will function/work on GW2014SP2 ?

Kind regards, HKO
  • HKO,

    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.

    These forums are peer-to-peer, best effort, volunteer run and that if your issue
    is urgent or not getting a response, you might try one of the following options:

    - Visit https://www.microfocus.com/support-and-services and search the knowledgebase and/or check
    all the other self support options and support programs available.
    - Open a service request: https://www.microfocus.com/support
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.microfocus.com)
    - You might consider hiring a local partner to assist you.
    https://www.partnernetprogram.com/partnerfinder/find.html

    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.microfocus.com/faq.php

    Sometimes this automatic posting will alert someone that can respond.

    If this is a reply to a duplicate posting or otherwise posted in error, please
    ignore and accept our apologies and rest assured we will issue a stern reprimand
    to our posting bot.

    Good luck!

    Your Micro Focus Forums Team
    http://forums.microfocus.com


  • HKO,

    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.

    These forums are peer-to-peer, best effort, volunteer run and that if your issue
    is urgent or not getting a response, you might try one of the following options:

    - Visit https://www.microfocus.com/support-and-services and search the knowledgebase and/or check
    all the other self support options and support programs available.
    - Open a service request: https://www.microfocus.com/support
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.microfocus.com)
    - You might consider hiring a local partner to assist you.
    https://www.partnernetprogram.com/partnerfinder/find.html

    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.microfocus.com/faq.php

    Sometimes this automatic posting will alert someone that can respond.

    If this is a reply to a duplicate posting or otherwise posted in error, please
    ignore and accept our apologies and rest assured we will issue a stern reprimand
    to our posting bot.

    Good luck!

    Your Micro Focus Forums Team
    http://forums.microfocus.com


  • HKO,

    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.

    These forums are peer-to-peer, best effort, volunteer run and that if your issue
    is urgent or not getting a response, you might try one of the following options:

    - Visit https://www.microfocus.com/support-and-services and search the knowledgebase and/or check
    all the other self support options and support programs available.
    - Open a service request: https://www.microfocus.com/support
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.microfocus.com)
    - You might consider hiring a local partner to assist you.
    https://www.partnernetprogram.com/partnerfinder/find.html

    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.microfocus.com/faq.php

    Sometimes this automatic posting will alert someone that can respond.

    If this is a reply to a duplicate posting or otherwise posted in error, please
    ignore and accept our apologies and rest assured we will issue a stern reprimand
    to our posting bot.

    Good luck!

    Your Micro Focus Forums Team
    http://forums.microfocus.com


  • In article <HKO.7ykuzz@no-mx.forums.microfocus.com>, Hko wrote:
    > We now have GW2014SP1, and when we use an iPad to access Webmail
    > (webaccess). There is no functionality to change to another user (proxy
    > account). Does anyone now if this will function/work on GW2014SP2 ?


    I believe this function is fully enabled in GW2014R2 (2014.2.x), not the
    R1 levels (2014.0.1 or 2014.0.2) you are describing.

    https://www.novell.com/documentation/groupwise2014r2/gw2014_guide_userweb
    /data/accessing_mailboxes_calendars_as_proxy.html#accessing_mailboxes_cal
    endars_as_proxy


    Andy of
    http://KonecnyConsulting.ca in Toronto
    Knowledge Partner
    http://forums.novell.com/member.php/75037-konecnya
    If you find a post helpful and are logged in the Web interface, please
    show your appreciation by clicking on the star below. Thanks!

  • On Wed, 24 May 2017 20:09:34 0000, Andy Konecny wrote:

    > In article <HKO.7ykuzz@no-mx.forums.microfocus.com>, Hko wrote:
    >> We now have GW2014SP1, and when we use an iPad to access Webmail
    >> (webaccess). There is no functionality to change to another user (proxy
    >> account). Does anyone now if this will function/work on GW2014SP2 ?

    >
    > I believe this function is fully enabled in GW2014R2 (2014.2.x), not the
    > R1 levels (2014.0.1 or 2014.0.2) you are describing.
    >
    > https://www.novell.com/documentation/groupwise2014r2/

    gw2014_guide_userweb
    > /data/

    accessing_mailboxes_calendars_as_proxy.html#accessing_mailboxes_cal
    > endars_as_proxy
    >
    >
    > Andy of http://KonecnyConsulting.ca in Toronto Knowledge Partner
    > http://forums.novell.com/member.php/75037-konecnya
    > If you find a post helpful and are logged in the Web interface, please
    > show your appreciation by clicking on the star below. Thanks!


    Good morning,

    I think you cannot access to proxy user via mobile webaccess (see below a
    part of online help for web mobile UI):
    -----snip
    Tablet Support

    You can access GroupWise directly from the browser on your tablet device
    with GroupWise 2014 WebAccess. You can log in and perform all the basic
    operations directly from your tablet, including: Mail (read, compose,
    reply, and forward), Calendar (accept, decline, personal, and group),
    Find, and Name Completion.

    To see a video demonstration of this feature, see WebAccess Mobile
    (Tablet Interface).

    The Apple iPad is also supported by GroupWise through the GroupWise
    Mobility Service product. Messages, contacts, and appointments can be
    synchronized between the GroupWise post office and the iPad.

    There are a few GroupWise features that are not available when using
    GroupWise WebAccess in a tablet browser.

    Address Book: System and personal address books are not available.
    However, you can use your Frequent Contacts address book to send items.
    You can add users to your Frequent Contacts by using the GroupWise
    Windows client or GroupWise WebAccess in a desktop browser.

    Appointments: You cannot schedule recurring appointments, and you
    cannot reschedule appointments.

    Busy Search: You cannot perform a Busy Search.

    Calendars: You cannot create personal calendars, share personal
    calendars, or publish personal calendars to the Internet. You cannot
    create new items and post them to personal or shared calendars.

    Calendar Conflicts: When you send appointments, you do not receive
    notifications if there is a conflicting appointment on your Calendar or a
    recipientâ€Tms Calendar.

    Documents: No Document Management is available.

    Folders: You cannot create or manage personal folders or shared
    folders.

    Mailbox Password: You cannot set or change your Mailbox password. If
    you need to change your password, you must use the GroupWise Windows
    client or GroupWise WebAccess in a desktop browser.

    Proxy: You cannot proxy another user.

    Rules: You cannot create, modify, or delete rules. If you have
    existing rules that were created with the GroupWise Windows client or
    GroupWise WebAccess in a desktop browser, those rules are enforced.

    Signature: You cannot add a signature to items you send.
    -----snap


    ---

    Thanks,

    -Jan