SSPR TLS Ciphers to use diffie-hellman 2048 bit key

Hi

Under Setting -> HTTPS Server the TLS Ciphers is default set to "TLS_AES_128_GCM_SHA256,TLS_AES_256_GCM_SHA384,TLS_CHACHA20_POLY1305_SHA256,TLS_AES_128_CCM_SHA256,TLS_AES_128_CCM_8_SHA256,TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256,TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256,TLS_DHE_RSA_WITH_AES_128_GCM_SHA256,TLS_DHE_DSS_WITH_AES_128_GCM_SHA256,TLS_ECDHE_RSA_WITH_AES_128_SHA256,TLS_ECDHE_ECDSA_WITH_AES_128_SHA256,TLS_ECDHE_RSA_WITH_AES_128_SHA,TLS_ECDHE_ECDSA_WITH_AES_128_SHA,TLS_DHE_RSA_WITH_AES_128_SHA256,TLS_DHE_RSA_WITH_AES_128_SHA,TLS_DHE_DSS_WITH_AES_128_SHA256"

What do I need to change, for setting up "diffie-hellman 2048 bit key".

A external security company have scanned our SSPR, and notet is only using diffie-hellman 1024 bit key

Best regards

Michael

Tags:

  • Which version of SSPR and which JVM are you using?

    What is the content of your jre/lib/security/java.security ?

  • Hi

    Version is = SSPR Version: v4.5.0.1 b59 r4baebb53, Framework: 1.10.3

    Running on the Linux Appliance, where do i find the location of this java.security file "I found one here -> /usr/lib64/jvm/java-1.8.0-ibm-1.8.0/jre/lib/security"

    Content....

    # ===========================================================================
    # Licensed Materials - Property of IBM
    # "Restricted Materials of IBM"
    #
    # IBM SDK, Java(tm) Technology Edition, v8
    # (C) Copyright IBM Corp. 2010, 2020. All Rights Reserved
    #
    # US Government Users Restricted Rights - Use, duplication or disclosure
    # restricted by GSA ADP Schedule Contract with IBM Corp.
    # ===========================================================================
    #
    # This is the "master security properties file".
    #
    # An alternate java.security properties file may be specified
    # from the command line via the system property
    #
    #    -Djava.security.properties=<URL>
    #
    # This properties file appends to the master security properties file.
    # If both properties files specify values for the same key, the value
    # from the command-line properties file is selected, as it is the last
    # one loaded.
    #
    # Also, if you specify
    #
    #    -Djava.security.properties==<URL> (2 equals),
    #
    # then that properties file completely overrides the master security
    # properties file.
    #
    # To disable the ability to specify an additional properties file from
    # the command line, set the key security.overridePropertiesFile
    # to false in the master security properties file. It is set to true
    # by default.

    # In this file, various security properties are set for use by
    # java.security classes. This is where users can statically register
    # Cryptography Package Providers ("providers" for short). The term
    # "provider" refers to a package or set of packages that supply a
    # concrete implementation of a subset of the cryptography aspects of
    # the Java Security API. A provider may, for example, implement one or
    # more digital signature algorithms or message digest algorithms.
    #
    # Each provider must implement a subclass of the Provider class.
    # To register a provider in this master security properties file,
    # specify the Provider subclass name and priority in the format
    #
    #    security.provider.<n>=<className>
    #
    # This declares a provider, and specifies its preference
    # order n. The preference order is the order in which providers are
    # searched for requested algorithms (when no specific provider is
    # requested). The order is 1-based; 1 is the most preferred, followed
    # by 2, and so on.
    #
    # <className> must specify the subclass of the Provider class whose
    # constructor sets the values of various properties that are required
    # for the Java Security API to look up the algorithms or other
    # facilities implemented by the provider.
    #
    # There must be at least one provider specification in java.security.
    # There is a default provider that comes standard with the JDK. It
    # is called the "SUN" provider, and its Provider subclass
    # named Sun appears in the sun.security.provider package. Thus, the
    # "SUN" provider is registered via the following:
    #
    #    security.provider.1=sun.security.provider.Sun
    #
    # (The number 1 is used for the default provider.)
    #
    # Note: Providers can be dynamically registered instead by calls to
    # either the addProvider or insertProviderAt method in the Security
    # class.

    #
    # List of providers and their preference orders (see above):
    #
    security.provider.1=com.ibm.jsse2.IBMJSSEProvider2
    security.provider.2=com.ibm.crypto.provider.IBMJCE
    security.provider.3=com.ibm.security.jgss.IBMJGSSProvider
    security.provider.4=com.ibm.security.cert.IBMCertPath
    security.provider.5=com.ibm.security.sasl.IBMSASL
    security.provider.6=com.ibm.xml.crypto.IBMXMLCryptoProvider
    security.provider.7=com.ibm.xml.enc.IBMXMLEncProvider
    security.provider.8=com.ibm.security.jgss.mech.spnego.IBMSPNEGO
    security.provider.9=sun.security.provider.Sun

    #
    # IBMJCE and IBMSecureRandom SecureRandom seed source.
    #
    # Select the primary source of seed data for the "SHA1PRNG" and
    # "NativePRNG" SecureRandom implementations in the "IBMJCE"
    # provider and the "SHA1PRNG" SecureRandom implementation
    # in the "IBMSecureRandom" provider.
    # (Other SecureRandom implementations might also use this property.)
    #
    # On Unix-like systems (for example, Solaris/Linux/MacOS), the
    # "NativePRNG" and "SHA1PRNG" implementations obtains seed data from
    # special device files such as file:/dev/random.
    #
    # On Windows systems, specifying the URLs "file:/dev/random" or
    # "file:/dev/urandom" will enable the native Microsoft CryptoAPI seeding
    # mechanism for SHA1PRNG.
    #
    # By default, an attempt is made to use the entropy gathering device
    # specified by the "securerandom.source" Security property.  If an
    # exception occurs while accessing the specified URL:
    #
    #     SHA1PRNG:
    #         the traditional system/thread activity algorithm will be used.
    #
    #     NativePRNG:
    #         a default value of /dev/random will be used.  If neither
    #         are available, the implementation will be disabled.
    #         "file" is the only currently supported protocol type.
    #
    # The entropy gathering device can also be specified with the System
    # property "java.security.egd". For example:
    #
    #   % java -Djava.security.egd=file:/dev/random MainClass
    #
    # Specifying this System property will override the
    # "securerandom.source" Security property.
    #
    # In addition, if "file:/dev/random" or "file:/dev/urandom" is
    # specified, the "NativePRNG" implementation will be more preferred than
    # SHA1PRNG in the IBMJCE provider.
    #
    securerandom.source=file:/dev/urandom

    #
    # A list of known strong SecureRandom implementations.
    #
    # To help guide applications in selecting a suitable strong
    # java.security.SecureRandom implementation, Java distributions should
    # indicate a list of known strong implementations using the property.
    #
    # This is a comma-separated list of algorithm and/or algorithm:provider
    # entries.
    #
    securerandom.strongAlgorithms=SHA2DRBG:IBMJCE

    #
    # Class to instantiate as the javax.security.auth.login.Configuration
    # provider.
    #
    login.configuration.provider=com.ibm.security.auth.login.ConfigFile

    #
    # Default login configuration file
    #
    #login.config.url.1=file:${user.home}/.java.login.config

    #
    # Class to instantiate as the system Policy. This is the name of the class
    # that will be used as the Policy object.
    #
    policy.provider=sun.security.provider.PolicyFile

    # The default is to have a single system-wide policy file,
    # and a policy file in the user's home directory.
    policy.url.1=file:${java.home}/lib/security/java.policy
    policy.url.2=file:${java.home}/lib/security/java.pol
    policy.url.3=file:///${user.home}/.java.policy

    # whether or not we expand properties in the policy file
    # if this is set to false, properties (${...}) will not be expanded in policy
    # files.
    policy.expandProperties=true

    # whether or not we allow an extra policy to be passed on the command line
    # with -Djava.security.policy=somefile. Comment out this line to disable
    # this feature.
    policy.allowSystemProperty=true

    # whether or not we look into the IdentityScope for trusted Identities
    # when encountering a 1.1 signed JAR file. If the identity is found
    # and is trusted, we grant it AllPermission.
    policy.ignoreIdentityScope=false

    #
    # Default keystore type.
    #
    keystore.type=jks

    #
    # Controls compatibility mode for the JKS keystore type.
    #
    # When set to 'true', the JKS keystore type supports loading
    # keystore files in either JKS or PKCS12 format. When set to 'false'
    # it supports loading only JKS keystore files.
    #
    keystore.type.compat=true

    #
    # List of comma-separated packages that start with or equal this string
    # will cause a security exception to be thrown when
    # passed to checkPackageAccess unless the
    # corresponding RuntimePermission ("accessClassInPackage."+package) has
    # been granted.
    package.access=sun.,\
                   com.ibm.oti.,\
                   openj9.internal.,\
                   com.intel.fortress.,\
                   com.sun.xml.internal.,\
                   com.sun.imageio.,\
                   com.sun.istack.internal.,\
                   com.sun.jmx.,\
                   com.sun.media.sound.,\
                   com.sun.naming.internal.,\
                   com.sun.proxy.,\
                   com.sun.corba.se.,\
                   com.sun.org.apache.bcel.internal.,\
                   com.sun.org.apache.regexp.internal.,\
                   com.sun.org.apache.xerces.internal.,\
                   com.sun.org.apache.xpath.internal.,\
                   com.sun.org.apache.xalan.internal.extensions.,\
                   com.sun.org.apache.xalan.internal.lib.,\
                   com.sun.org.apache.xalan.internal.res.,\
                   com.sun.org.apache.xalan.internal.templates.,\
                   com.sun.org.apache.xalan.internal.utils.,\
                   com.sun.org.apache.xalan.internal.xslt.,\
                   com.sun.org.apache.xalan.internal.xsltc.cmdline.,\
                   com.sun.org.apache.xalan.internal.xsltc.compiler.,\
                   com.sun.org.apache.xalan.internal.xsltc.trax.,\
                   com.sun.org.apache.xalan.internal.xsltc.util.,\
                   com.sun.org.apache.xml.internal.res.,\
                   com.sun.org.apache.xml.internal.security.,\
                   com.sun.org.apache.xml.internal.serializer.utils.,\
                   com.sun.org.apache.xml.internal.utils.,\
                   com.sun.org.glassfish.,\
                   com.oracle.xmlns.internal.,\
                   com.oracle.webservices.internal.,\
                   com.ibm.stax.,\
                   com.ibm.xml.jaxp.datatype.,\
                   com.ibm.xml.resolver.,\
                   com.ibm.xml.xlxp.api.event.,\
                   com.ibm.xml.xlxp.api.jaxp.impl.,\
                   com.ibm.xml.xlxp.api.sax.impl.,\
                   com.ibm.xml.xlxp.api.stax.events.,\
                   com.ibm.xml.xlxp.api.stax.msg.,\
                   com.ibm.xml.xlxp.api.stax.serializer.,\
                   com.ibm.xml.xlxp.api.util.,\
                   com.ibm.xml.xlxp.scan.msg.,\
                   com.ibm.xml.xlxp.scan.util.,\
                   com.ibm.xtq.ast.parsers.xpath.,\
                   com.ibm.xtq.ast.parsers.xslt.,\
                   com.ibm.xtq.ast.res.,\
                   com.ibm.xtq.ast.visit.,\
                   com.ibm.xtq.bcel.,\
                   com.ibm.xtq.common.utils.,\
                   com.ibm.xtq.utils.,\
                   com.ibm.xtq.xml.datamodel.,\
                   com.ibm.xtq.xml.dtm.ref.sax2dtm.,\
                   com.ibm.xtq.xml.dtm.utils.,\
                   com.ibm.xtq.xml.experimental.,\
                   com.ibm.xtq.xml.res.,\
                   com.ibm.xtq.xml.types.,\
                   com.ibm.xtq.xml.unicode.normalize.,\
                   com.ibm.xtq.xml.utils.,\
                   com.ibm.xtq.xml.xdm.dom.,\
                   com.ibm.xtq.xml.xdm.ref.,\
                   com.ibm.xtq.xml.xdm.res.,\
                   com.ibm.xtq.xpath.jaxp.,\
                   com.ibm.xtq.xslt.cmdline.,\
                   com.ibm.xtq.xslt.jaxp.interpreter.,\
                   com.ibm.xtq.xslt.res.,\
                   com.ibm.xtq.xslt.runtime.debug.,\
                   com.ibm.xtq.xslt.runtime.output.,\
                   com.ibm.xtq.xslt.runtime.res.,\
                   com.ibm.xtq.xslt.runtime.v2.,\
                   com.ibm.xtq.xslt.translator.v1.,\
                   com.ibm.xtq.xslt.translator.v2.,\
                   com.ibm.xtq.xslt.typechecker.,\
                   com.ibm.xtq.xslt.xylem.autof.,\
                   com.ibm.xtq.xslt.xylem.codegen.,\
                   com.ibm.xtq.xslt.xylem.interpreter.,\
                   com.ibm.xtq.xslt.xylem.optimizers.,\
                   com.ibm.xtq.xslt.xylem.parser.,\
                   com.ibm.xtq.xslt.xylem.partialeval.,\
                   com.ibm.xtq.xslt.xylem.types.,\
                   com.ibm.xtq.xslt.xylem.xpath20.analysis.,\
                   com.ibm.xtq.xslt.xylem.xpath20.parser.,\
                   com.ibm.xtq.xslt.xylem.xpath20.typesystem.,\
                   com.ibm.xylem.annot.meta.,\
                   com.ibm.xylem.builders.,\
                   com.ibm.xylem.codegen.,\
                   com.ibm.xylem.commandline.,\
                   com.ibm.xylem.config.,\
                   com.ibm.xylem.drivers.,\
                   com.ibm.xylem.interpreter.,\
                   com.ibm.xylem.parser.,\
                   com.ibm.xylem.res.,\
                   com.ibm.xylem.types.,\
                   com.ibm.xylem.utils.,\
                   com.sun.org.apache.xalan.internal.xsltc.trax.,\
                   com.sun.org.apache.xerces.internal.dom.,\
                   com.sun.org.apache.xerces.internal.jaxp.,\
                   com.sun.org.apache.xerces.internal.parsers.,\
                   com.sun.org.apache.xpath.internal.jaxp.,\
                   com.sun.xml.internal.stream.,\
                   org.apache.html.dom.,\
                   org.apache.wml.,\
                   org.apache.xalan.client.,\
                   org.apache.xalan.extensions.,\
                   org.apache.xalan.lib.sql.,\
                   org.apache.xalan.res.,\
                   org.apache.xalan.serialize.,\
                   org.apache.xalan.templates.,\
                   org.apache.xalan.trace.,\
                   org.apache.xalan.transformer.,\
                   org.apache.xalan.xslt.,\
                   org.apache.xalan.xsltc.cmdline.,\
                   org.apache.xerces.dom.events.,\
                   org.apache.xerces.dom3.as.,\
                   org.apache.xerces.impl.dtd.,\
                   org.apache.xerces.impl.dv.util.,\
                   org.apache.xerces.impl.io.,\
                   org.apache.xerces.impl.msg.,\
                   org.apache.xerces.impl.validation.,\
                   org.apache.xerces.impl.xpath.,\
                   org.apache.xerces.impl.xs.,\
                   org.apache.xerces.util.,\
                   org.apache.xerces.xinclude.,\
                   org.apache.xerces.xni.grammars.,\
                   org.apache.xerces.xpointer.,\
                   org.apache.xerces.xs.datatypes.,\
                   org.apache.xml.dtm.ref.dom2dtm.,\
                   org.apache.xml.dtm.ref.sax2dtm.,\
                   org.apache.xml.res.,\
                   org.apache.xml.serializer.charmap.,\
                   org.apache.xml.serializer.dom3.,\
                   org.apache.xml.serializer.unicode.,\
                   org.apache.xml.serializer.utils.,\
                   org.apache.xml.utils.,\
                   org.apache.xmlcommons.,\
                   org.apache.xpath.axes.,\
                   org.apache.xpath.compiler.,\
                   org.apache.xpath.functions.,\
                   org.apache.xpath.objects.,\
                   org.apache.xpath.operations.,\
                   org.apache.xpath.patterns.,\
                   org.apache.xpath.res.,\
                   oracle.jrockit.jfr.,\
                   org.jcp.xml.dsig.internal.,\
                   com.ibm.rmi.channel.,\
                   com.ibm.rmi.corba.,\
                   com.ibm.rmi.iiop.,\
                   com.ibm.rmi.io.,\
                   com.ibm.rmi.pi.,\
                   com.ibm.rmi.poa.,\
                   com.ibm.rmi.ras.,\
                   com.ibm.rmi.transport.,\
                   com.ibm.rmi.util.,\
                   com.ibm.CORBA.channel.orb.,\
                   com.ibm.CORBA.iiop.,\
                   com.ibm.CORBA.nio.,\
                   com.ibm.CORBA.poa.,\
                   com.ibm.CORBA.transport.,\
                   jdk.internal.,\
                   jdk.nashorn.internal.,\
                   jdk.nashorn.tools.,\
                   jdk.xml.internal.,\
                   com.sun.activation.registries.,\
                   com.sun.browser.,\
                   com.sun.glass.,\
                   com.sun.javafx.,\
                   com.sun.media.,\
                   com.sun.openpisces.,\
                   com.sun.prism.,\
                   com.sun.scenario.,\
                   com.sun.t2k.,\
                   com.sun.pisces.,\
                   com.sun.webkit.,\
                   jdk.management.resource.internal.

    #
    # List of comma-separated packages that start with or equal this string
    # will cause a security exception to be thrown when
    # passed to checkPackageDefinition unless the
    # corresponding RuntimePermission ("defineClassInPackage."+package) has
    # been granted.
    #
    # by default, none of the class loaders supplied with the JDK call
    # checkPackageDefinition.
    #
    package.definition=sun.,\
                       com.sun.xml.internal.,\
                       com.sun.imageio.,\
                       com.sun.istack.internal.,\
                       com.sun.jmx.,\
                       com.sun.media.sound.,\
                       com.sun.naming.internal.,\
                       com.sun.proxy.,\
                       com.sun.corba.se.,\
                       com.sun.org.apache.bcel.internal.,\
                       com.sun.org.apache.regexp.internal.,\
                       com.sun.org.apache.xerces.internal.,\
                       com.sun.org.apache.xpath.internal.,\
                       com.sun.org.apache.xalan.internal.extensions.,\
                       com.sun.org.apache.xalan.internal.lib.,\
                       com.sun.org.apache.xalan.internal.res.,\
                       com.sun.org.apache.xalan.internal.templates.,\
                       com.sun.org.apache.xalan.internal.utils.,\
                       com.sun.org.apache.xalan.internal.xslt.,\
                       com.sun.org.apache.xalan.internal.xsltc.cmdline.,\
                       com.sun.org.apache.xalan.internal.xsltc.compiler.,\
                       com.sun.org.apache.xalan.internal.xsltc.trax.,\
                       com.sun.org.apache.xalan.internal.xsltc.util.,\
                       com.sun.org.apache.xml.internal.res.,\
                       com.sun.org.apache.xml.internal.security.,\
                       com.sun.org.apache.xml.internal.serializer.utils.,\
                       com.sun.org.apache.xml.internal.utils.,\
                       com.sun.org.glassfish.,\
                       com.oracle.xmlns.internal.,\
                       com.oracle.webservices.internal.,\
                       com.ibm.stax.,\
                       com.ibm.xml.jaxp.datatype.,\
                       com.ibm.xml.resolver.,\
                       com.ibm.xml.xlxp.api.event.,\
                       com.ibm.xml.xlxp.api.jaxp.impl.,\
                       com.ibm.xml.xlxp.api.sax.impl.,\
                       com.ibm.xml.xlxp.api.stax.events.,\
                       com.ibm.xml.xlxp.api.stax.msg.,\
                       com.ibm.xml.xlxp.api.stax.serializer.,\
                       com.ibm.xml.xlxp.api.util.,\
                       com.ibm.xml.xlxp.scan.msg.,\
                       com.ibm.xml.xlxp.scan.util.,\
                       com.ibm.xtq.ast.parsers.xpath.,\
                       com.ibm.xtq.ast.parsers.xslt.,\
                       com.ibm.xtq.ast.res.,\
                       com.ibm.xtq.ast.visit.,\
                       com.ibm.xtq.bcel.,\
                       com.ibm.xtq.common.utils.,\
                       com.ibm.xtq.utils.,\
                       com.ibm.xtq.xml.datamodel.,\
                       com.ibm.xtq.xml.dtm.ref.sax2dtm.,\
                       com.ibm.xtq.xml.dtm.utils.,\
                       com.ibm.xtq.xml.experimental.,\
                       com.ibm.xtq.xml.res.,\
                       com.ibm.xtq.xml.types.,\
                       com.ibm.xtq.xml.unicode.normalize.,\
                       com.ibm.xtq.xml.utils.,\
                       com.ibm.xtq.xml.xdm.dom.,\
                       com.ibm.xtq.xml.xdm.ref.,\
                       com.ibm.xtq.xml.xdm.res.,\
                       com.ibm.xtq.xpath.jaxp.,\
                       com.ibm.xtq.xslt.cmdline.,\
                       com.ibm.xtq.xslt.jaxp.interpreter.,\
                       com.ibm.xtq.xslt.res.,\
                       com.ibm.xtq.xslt.runtime.debug.,\
                       com.ibm.xtq.xslt.runtime.output.,\
                       com.ibm.xtq.xslt.runtime.res.,\
                       com.ibm.xtq.xslt.runtime.v2.,\
                       com.ibm.xtq.xslt.translator.v1.,\
                       com.ibm.xtq.xslt.translator.v2.,\
                       com.ibm.xtq.xslt.typechecker.,\
                       com.ibm.xtq.xslt.xylem.autof.,\
                       com.ibm.xtq.xslt.xylem.codegen.,\
                       com.ibm.xtq.xslt.xylem.interpreter.,\
                       com.ibm.xtq.xslt.xylem.optimizers.,\
                       com.ibm.xtq.xslt.xylem.parser.,\
                       com.ibm.xtq.xslt.xylem.partialeval.,\
                       com.ibm.xtq.xslt.xylem.types.,\
                       com.ibm.xtq.xslt.xylem.xpath20.analysis.,\
                       com.ibm.xtq.xslt.xylem.xpath20.parser.,\
                       com.ibm.xtq.xslt.xylem.xpath20.typesystem.,\
                       com.ibm.xylem.annot.meta.,\
                       com.ibm.xylem.builders.,\
                       com.ibm.xylem.codegen.,\
                       com.ibm.xylem.commandline.,\
                       com.ibm.xylem.config.,\
                       com.ibm.xylem.drivers.,\
                       com.ibm.xylem.interpreter.,\
                       com.ibm.xylem.parser.,\
                       com.ibm.xylem.res.,\
                       com.ibm.xylem.types.,\
                       com.ibm.xylem.utils.,\
                       com.sun.org.apache.xalan.internal.xsltc.trax.,\
                       com.sun.org.apache.xerces.internal.dom.,\
                       com.sun.org.apache.xerces.internal.jaxp.,\
                       com.sun.org.apache.xerces.internal.parsers.,\
                       com.sun.org.apache.xpath.internal.jaxp.,\
                       com.sun.xml.internal.stream.,\
                       org.apache.html.dom.,\
                       org.apache.wml.,\
                       org.apache.xalan.client.,\
                       org.apache.xalan.extensions.,\
                       org.apache.xalan.lib.sql.,\
                       org.apache.xalan.res.,\
                       org.apache.xalan.serialize.,\
                       org.apache.xalan.templates.,\
                       org.apache.xalan.trace.,\
                       org.apache.xalan.transformer.,\
                       org.apache.xalan.xslt.,\
                       org.apache.xalan.xsltc.cmdline.,\
                       org.apache.xerces.dom.events.,\
                       org.apache.xerces.dom3.as.,\
                       org.apache.xerces.impl.dtd.,\
                       org.apache.xerces.impl.dv.util.,\
                       org.apache.xerces.impl.io.,\
                       org.apache.xerces.impl.msg.,\
                       org.apache.xerces.impl.validation.,\
                       org.apache.xerces.impl.xpath.,\
                       org.apache.xerces.impl.xs.,\
                       org.apache.xerces.util.,\
                       org.apache.xerces.xinclude.,\
                       org.apache.xerces.xni.grammars.,\
                       org.apache.xerces.xpointer.,\
                       org.apache.xerces.xs.datatypes.,\
                       org.apache.xml.dtm.ref.dom2dtm.,\
                       org.apache.xml.dtm.ref.sax2dtm.,\
                       org.apache.xml.res.,\
                       org.apache.xml.serializer.charmap.,\
                       org.apache.xml.serializer.dom3.,\
                       org.apache.xml.serializer.unicode.,\
                       org.apache.xml.serializer.utils.,\
                       org.apache.xml.utils.,\
                       org.apache.xmlcommons.,\
                       org.apache.xpath.axes.,\
                       org.apache.xpath.compiler.,\
                       org.apache.xpath.functions.,\
                       org.apache.xpath.objects.,\
                       org.apache.xpath.operations.,\
                       org.apache.xpath.patterns.,\
                       org.apache.xpath.res.,\
                       oracle.jrockit.jfr.,\
                       org.jcp.xml.dsig.internal.,\
                       jdk.internal.,\
                       jdk.nashorn.internal.,\
                       jdk.nashorn.tools.,\
                       jdk.xml.internal.,\
                       com.sun.activation.registries.,\
                       com.sun.browser.,\
                       com.sun.glass.,\
                       com.sun.javafx.,\
                       com.sun.media.,\
                       com.sun.openpisces.,\
                       com.sun.prism.,\
                       com.sun.scenario.,\
                       com.sun.t2k.,\
                       com.sun.pisces.,\
                       com.sun.webkit.,\
                       jdk.management.resource.internal.

    #
    # Determines whether this properties file can be appended to
    # or overridden on the command line via -Djava.security.properties
    #
    security.overridePropertiesFile=true

    #
    # Determines the default key and trust manager factory algorithms for
    # the javax.net.ssl package.
    #
    ssl.KeyManagerFactory.algorithm=IbmX509
    ssl.TrustManagerFactory.algorithm=PKIX

    #
    # The Java-level namelookup cache policy for successful lookups:
    #
    # any negative value: caching forever
    # any positive value: the number of seconds to cache an address for
    # zero: do not cache
    #
    # default value is forever (FOREVER). For security reasons, this
    # caching is made forever when a security manager is set. When a security
    # manager is not set, the default behavior in this implementation
    # is to cache for 30 seconds.
    #
    # NOTE: setting this to anything other than the default value can have
    #       serious security implications. Do not set it unless
    #       you are sure you are not exposed to DNS spoofing attack.
    #
    #networkaddress.cache.ttl=-1

    # The Java-level namelookup cache policy for failed lookups:
    #
    # any negative value: cache forever
    # any positive value: the number of seconds to cache negative lookup results
    # zero: do not cache
    #
    # In some Microsoft Windows networking environments that employ
    # the WINS name service in addition to DNS, name service lookups
    # that fail may take a noticeably long time to return (approx. 5 seconds).
    # For this reason the default caching policy is to maintain these
    # results for 10 seconds.
    #
    #
    networkaddress.cache.negative.ttl=10

    #
    # Properties to configure OCSP for certificate revocation checking
    #

    # Enable OCSP
    #
    # By default, OCSP is not used for certificate revocation checking.
    # This property enables the use of OCSP when set to the value "true".
    #
    # NOTE: SocketPermission is required to connect to an OCSP responder.
    #
    # Example,
    #   ocsp.enable=true

    #
    # Location of the OCSP responder
    #
    # By default, the location of the OCSP responder is determined implicitly
    # from the certificate being validated. This property explicitly specifies
    # the location of the OCSP responder. The property is used when the
    # Authority Information Access extension (defined in RFC 3280) is absent
    # from the certificate or when it requires overriding.
    #
    # Example,
    #   ocsp.responderURL=http://ocsp.example.net:80

    #
    # Subject name of the OCSP responder's certificate
    #
    # By default, the certificate of the OCSP responder is that of the issuer
    # of the certificate being validated. This property identifies the certificate
    # of the OCSP responder when the default does not apply. Its value is a string
    # distinguished name (defined in RFC 2253) which identifies a certificate in
    # the set of certificates supplied during cert path validation. In cases where
    # the subject name alone is not sufficient to uniquely identify the certificate
    # then both the "ocsp.responderCertIssuerName" and
    # "ocsp.responderCertSerialNumber" properties must be used instead. When this
    # property is set then those two properties are ignored.
    #
    # Example,
    #   ocsp.responderCertSubjectName="CN=OCSP Responder, O=XYZ Corp"

    #
    # Issuer name of the OCSP responder's certificate
    #
    # By default, the certificate of the OCSP responder is that of the issuer
    # of the certificate being validated. This property identifies the certificate
    # of the OCSP responder when the default does not apply. Its value is a string
    # distinguished name (defined in RFC 2253) which identifies a certificate in
    # the set of certificates supplied during cert path validation. When this
    # property is set then the "ocsp.responderCertSerialNumber" property must also
    # be set. When the "ocsp.responderCertSubjectName" property is set then this
    # property is ignored.
    #
    # Example,
    #   ocsp.responderCertIssuerName="CN=Enterprise CA, O=XYZ Corp"

    #
    # Serial number of the OCSP responder's certificate
    #
    # By default, the certificate of the OCSP responder is that of the issuer
    # of the certificate being validated. This property identifies the certificate
    # of the OCSP responder when the default does not apply. Its value is a string
    # of hexadecimal digits (colon or space separators may be present) which
    # identifies a certificate in the set of certificates supplied during cert path
    # validation. When this property is set then the "ocsp.responderCertIssuerName"
    # property must also be set. When the "ocsp.responderCertSubjectName" property
    # is set then this property is ignored.
    #
    # Example,
    #   ocsp.responderCertSerialNumber=2A:FF:00

    #
    # Policy for failed Kerberos KDC lookups:
    #
    # When a KDC is unavailable (network error, service failure, etc), it is
    # put inside a blacklist and accessed less often for future requests. The
    # value (case-insensitive) for this policy can be:
    #
    # tryLast
    #    KDCs in the blacklist are always tried after those not on the list.
    #
    # tryLess[:max_retries,timeout]
    #    KDCs in the blacklist are still tried by their order in the configuration,
    #    but with smaller max_retries and timeout values. max_retries and timeout
    #    are optional numerical parameters (default 1 and 5000, which means once
    #    and 5 seconds). Please notes that if any of the values defined here is
    #    more than what is defined in krb5.conf, it will be ignored.
    #
    # Whenever a KDC is detected as available, it is removed from the blacklist.
    # The blacklist is reset when krb5.conf is reloaded. You can add
    # refreshKrb5Config=true to a JAAS configuration file so that krb5.conf is
    # reloaded whenever a JAAS authentication is attempted.
    #
    # Example,
    #   krb5.kdc.bad.policy = tryLast
    #   krb5.kdc.bad.policy = tryLess:2,2000
    krb5.kdc.bad.policy = tryLast

    # Algorithm restrictions for certification path (CertPath) processing
    #
    # In some environments, certain algorithms or key lengths may be undesirable
    # for certification path building and validation.  For example, "MD2" is
    # generally no longer considered to be a secure hash algorithm.  This section
    # describes the mechanism for disabling algorithms based on algorithm name
    # and/or key length.  This includes algorithms used in certificates, as well
    # as revocation information such as CRLs and signed OCSP Responses.
    # The syntax of the disabled algorithm string is described as follows:
    #   DisabledAlgorithms:
    #       " DisabledAlgorithm { , DisabledAlgorithm } "
    #
    #   DisabledAlgorithm:
    #       AlgorithmName [Constraint] { '&' Constraint }
    #
    #   AlgorithmName:
    #       (see below)
    #
    #   Constraint:
    #       KeySizeConstraint | CAConstraint | DenyAfterConstraint |
    #       UsageConstraint
    #
    #   KeySizeConstraint:
    #       keySize Operator KeyLength
    #
    #   Operator:
    #       <= | < | == | != | >= | >
    #
    #   KeyLength:
    #       Integer value of the algorithm's key length in bits
    #
    #   CAConstraint:
    #       jdkCA
    #
    #   DenyAfterConstraint:
    #       denyAfter YYYY-MM-DD
    #
    #   UsageConstraint:
    #       usage [TLSServer] [TLSClient] [SignedJAR]
    #
    # The "AlgorithmName" is the standard algorithm name of the disabled
    # algorithm. See "Java Cryptography Architecture Standard Algorithm Name
    # Documentation" for information about Standard Algorithm Names.  Matching
    # is performed using a case-insensitive sub-element matching rule.  (For
    # example, in "SHA1withECDSA" the sub-elements are "SHA1" for hashing and
    # "ECDSA" for signatures.)  If the assertion "AlgorithmName" is a
    # sub-element of the certificate algorithm name, the algorithm will be
    # rejected during certification path building and validation.  For example,
    # the assertion algorithm name "DSA" will disable all certificate algorithms
    # that rely on DSA, such as NONEwithDSA, SHA1withDSA.  However, the assertion
    # will not disable algorithms related to "ECDSA".
    #
    # A "Constraint" defines restrictions on the keys and/or certificates for
    # a specified AlgorithmName:
    #
    #   KeySizeConstraint:
    #     keySize Operator KeyLength
    #       The constraint requires a key of a valid size range if the
    #       "AlgorithmName" is of a key algorithm.  The "KeyLength" indicates
    #       the key size specified in number of bits.  For example,
    #       "RSA keySize <= 1024" indicates that any RSA key with key size less
    #       than or equal to 1024 bits should be disabled, and
    #       "RSA keySize < 1024, RSA keySize > 2048" indicates that any RSA key
    #       with key size less than 1024 or greater than 2048 should be disabled.
    #       This constraint is only used on algorithms that have a key size.
    #
    #   CAConstraint:
    #     jdkCA
    #       This constraint prohibits the specified algorithm only if the
    #       algorithm is used in a certificate chain that terminates at a marked
    #       trust anchor in the lib/security/cacerts keystore.  If the jdkCA
    #       constraint is not set, then all chains using the specified algorithm
    #       are restricted.  jdkCA may only be used once in a DisabledAlgorithm
    #       expression.
    #       Example:  To apply this constraint to SHA-1 certificates, include
    #       the following:  "SHA1 jdkCA"
    #
    #   DenyAfterConstraint:
    #     denyAfter YYYY-MM-DD
    #       This constraint prohibits a certificate with the specified algorithm
    #       from being used after the date regardless of the certificate's
    #       validity.  JAR files that are signed and timestamped before the
    #       constraint date with certificates containing the disabled algorithm
    #       will not be restricted.  The date is processed in the UTC timezone.
    #       This constraint can only be used once in a DisabledAlgorithm
    #       expression.
    #       Example:  To deny usage of RSA 2048 bit certificates after Feb 3 2020,
    #       use the following:  "RSA keySize == 2048 & denyAfter 2020-02-03"
    #
    #   UsageConstraint:
    #     usage [TLSServer] [TLSClient] [SignedJAR]
    #       This constraint prohibits the specified algorithm for
    #       a specified usage.  This should be used when disabling an algorithm
    #       for all usages is not practical. 'TLSServer' restricts the algorithm
    #       in TLS server certificate chains when server authentication is
    #       performed. 'TLSClient' restricts the algorithm in TLS client
    #       certificate chains when client authentication is performed.
    #       'SignedJAR' constrains use of certificates in signed jar files.
    #       The usage type follows the keyword and more than one usage type can
    #       be specified with a whitespace delimiter.
    #       Example:  "SHA1 usage TLSServer TLSClient"
    #
    # When an algorithm must satisfy more than one constraint, it must be
    # delimited by an ampersand '&'.  For example, to restrict certificates in a
    # chain that terminate at a distribution provided trust anchor and contain
    # RSA keys that are less than or equal to 1024 bits, add the following
    # constraint:  "RSA keySize <= 1024 & jdkCA".
    #
    # All DisabledAlgorithms expressions are processed in the order defined in the
    # property.  This requires lower keysize constraints to be specified
    # before larger keysize constraints of the same algorithm.  For example:
    # "RSA keySize < 1024 & jdkCA, RSA keySize < 2048".
    #
    # Note: The algorithm restrictions do not apply to trust anchors or
    # self-signed certificates.
    #
    # Note: This property is currently used by Oracle's PKIX implementation. It
    # is not guaranteed to be examined and used by other implementations.
    #
    # Example:
    #   jdk.certpath.disabledAlgorithms=MD2, DSA, RSA keySize < 2048
    #
    #
    jdk.certpath.disabledAlgorithms=MD2, MD5, SHA1 jdkCA & usage TLSServer, \
        RSA keySize < 1024, DSA keySize < 1024, EC keySize < 224

    #
    # Algorithm restrictions for signed JAR files
    #
    # In some environments, certain algorithms or key lengths may be undesirable
    # for signed JAR validation.  For example, "MD2" is generally no longer
    # considered to be a secure hash algorithm.  This section describes the
    # mechanism for disabling algorithms based on algorithm name and/or key length.
    # JARs signed with any of the disabled algorithms or key sizes will be treated
    # as unsigned.
    #
    # The syntax of the disabled algorithm string is described as follows:
    #   DisabledAlgorithms:
    #       " DisabledAlgorithm { , DisabledAlgorithm } "
    #
    #   DisabledAlgorithm:
    #       AlgorithmName [Constraint] { '&' Constraint }
    #
    #   AlgorithmName:
    #       (see below)
    #
    #   Constraint:
    #       KeySizeConstraint | DenyAfterConstraint
    #
    #   KeySizeConstraint:
    #       keySize Operator KeyLength
    #
    #   DenyAfterConstraint:
    #       denyAfter YYYY-MM-DD
    #
    #   Operator:
    #       <= | < | == | != | >= | >
    #
    #   KeyLength:
    #       Integer value of the algorithm's key length in bits
    #
    # Note: This property is currently used by the JDK Reference
    # implementation. It is not guaranteed to be examined and used by other
    # implementations.
    #
    # See "jdk.certpath.disabledAlgorithms" for syntax descriptions.
    #
    jdk.jar.disabledAlgorithms=MD2, MD5, RSA keySize < 1024, DSA keySize < 1024

    #
    # Algorithm restrictions for Secure Socket Layer/Transport Layer Security
    # (SSL/TLS) processing
    #
    # In some environments, certain algorithms or key lengths may be undesirable
    # when using SSL/TLS.  This section describes the mechanism for disabling
    # algorithms during SSL/TLS security parameters negotiation, including
    # protocol version negotiation, cipher suites selection, peer authentication
    # and key exchange mechanisms.
    #
    # Disabled algorithms will not be negotiated for SSL/TLS connections, even
    # if they are enabled explicitly in an application.
    #
    # For PKI-based peer authentication and key exchange mechanisms, this list
    # of disabled algorithms will also be checked during certification path
    # building and validation, including algorithms used in certificates, as
    # well as revocation information such as CRLs and signed OCSP Responses.
    # This is in addition to the jdk.certpath.disabledAlgorithms property above.
    #
    # See the specification of "jdk.certpath.disabledAlgorithms" for the
    # syntax of the disabled algorithm string.
    #
    # Note: The algorithm restrictions do not apply to trust anchors or
    # self-signed certificates.
    #
    # Note: This property is currently used by the JDK Reference implementation.
    # It is not guaranteed to be examined and used by other implementations.
    #
    # Example:
    #   jdk.tls.disabledAlgorithms=MD5, SSLv3, DSA, RSA keySize < 2048
    jdk.tls.disabledAlgorithms=SSLv3, RC4, DES, MD5withRSA, DH keySize < 1024, DESede, \
        EC keySize < 224, 3DES_EDE_CBC, anon, NULL


    # Legacy algorithms for Secure Socket Layer/Transport Layer Security (SSL/TLS)
    # processing in JSSE implementation.
    #
    # In some environments, a certain algorithm may be undesirable but it
    # cannot be disabled because of its use in legacy applications.  Legacy
    # algorithms may still be supported, but applications should not use them
    # as the security strength of legacy algorithms are usually not strong enough
    # in practice.
    #
    # During SSL/TLS security parameters negotiation, legacy algorithms will
    # not be negotiated unless there are no other candidates.
    #
    # The syntax of the legacy algorithms string is described as this Java
    # BNF-style:
    #   LegacyAlgorithms:
    #       " LegacyAlgorithm { , LegacyAlgorithm } "
    #
    #   LegacyAlgorithm:
    #       AlgorithmName (standard JSSE algorithm name)
    #
    # See the specification of security property "jdk.certpath.disabledAlgorithms"
    # for the syntax and description of the "AlgorithmName" notation.
    #
    # Per SSL/TLS specifications, cipher suites have the form:
    #       SSL_KeyExchangeAlg_WITH_CipherAlg_MacAlg
    # or
    #       TLS_KeyExchangeAlg_WITH_CipherAlg_MacAlg
    #
    # For example, the cipher suite TLS_RSA_WITH_AES_128_CBC_SHA uses RSA as the
    # key exchange algorithm, AES_128_CBC (128 bits AES cipher algorithm in CBC
    # mode) as the cipher (encryption) algorithm, and SHA-1 as the message digest
    # algorithm for HMAC.
    #
    # The LegacyAlgorithm can be one of the following standard algorithm names:
    #     1. JSSE cipher suite name, e.g., TLS_RSA_WITH_AES_128_CBC_SHA
    #     2. JSSE key exchange algorithm name, e.g., RSA
    #     3. JSSE cipher (encryption) algorithm name, e.g., AES_128_CBC
    #     4. JSSE message digest algorithm name, e.g., SHA
    #
    # See SSL/TLS specifications and "Java Cryptography Architecture Standard
    # Algorithm Name Documentation" for information about the algorithm names.
    #
    # Note: This property is currently used by the JDK Reference implementation.
    # It is not guaranteed to be examined and used by other implementations.
    # There is no guarantee the property will continue to exist or be of the
    # same syntax in future releases.
    #
    # Example:
    #   jdk.tls.legacyAlgorithms=DH_anon, DES_CBC, SSL_RSA_WITH_RC4_128_MD5
    #
    jdk.tls.legacyAlgorithms= \
            K_NULL, C_NULL, M_NULL, \
            DH_anon, ECDH_anon, \
            RC4_128, RC4_40, DES_CBC, DES40_CBC

    # The pre-defined default finite field Diffie-Hellman ephemeral (DHE)
    # parameters for Transport Layer Security (SSL/TLS/DTLS) processing.
    #
    # In traditional SSL/TLS/DTLS connections where finite field DHE parameters
    # negotiation mechanism is not used, the server offers the client group
    # parameters, base generator g and prime modulus p, for DHE key exchange.
    # It is recommended to use dynamic group parameters.  This property defines
    # a mechanism that allows you to specify custom group parameters.
    #
    # The syntax of this property string is described as this Java BNF-style:
    #   DefaultDHEParameters:
    #       DefinedDHEParameters { , DefinedDHEParameters }
    #
    #   DefinedDHEParameters:
    #       "{" DHEPrimeModulus , DHEBaseGenerator "}"
    #
    #   DHEPrimeModulus:
    #       HexadecimalDigits
    #
    #   DHEBaseGenerator:
    #       HexadecimalDigits
    #
    #   HexadecimalDigits:
    #       HexadecimalDigit { HexadecimalDigit }
    #
    #   HexadecimalDigit: one of
    #       0 1 2 3 4 5 6 7 8 9 A B C D E F a b c d e f
    #
    # Whitespace characters are ignored.
    #
    # The "DefinedDHEParameters" defines the custom group parameters, prime
    # modulus p and base generator g, for a particular size of prime modulus p.
    # The "DHEPrimeModulus" defines the hexadecimal prime modulus p, and the
    # "DHEBaseGenerator" defines the hexadecimal base generator g of a group
    # parameter.  It is recommended to use safe primes for the custom group
    # parameters.
    #
    # If this property is not defined or the value is empty, the underlying JSSE
    # provider's default group parameter is used for each connection.
    #
    # If the property value does not follow the grammar, or a particular group
    # parameter is not valid, the connection will fall back and use the
    # underlying JSSE provider's default group parameter.
    #
    # Note: This property is currently used by OpenJDK's JSSE implementation. It
    # is not guaranteed to be examined and used by other implementations.
    #
    # Example:
    #   jdk.tls.server.defaultDHEParameters=
    #       { \
    #       FFFFFFFF FFFFFFFF C90FDAA2 2168C234 C4C6628B 80DC1CD1 \
    #       29024E08 8A67CC74 020BBEA6 3B139B22 514A0879 8E3404DD \
    #       EF9519B3 CD3A431B 302B0A6D F25F1437 4FE1356D 6D51C245 \
    #       E485B576 625E7EC6 F44C42E9 A637ED6B 0BFF5CB6 F406B7ED \
    #       EE386BFB 5A899FA5 AE9F2411 7C4B1FE6 49286651 ECE65381 \
    #       FFFFFFFF FFFFFFFF, 2}

    # Cryptographic Jurisdiction Policy defaults
    #
    # Import and export control rules on cryptographic software vary from
    # country to country.  By default, the JDK provides two different sets of
    # cryptographic policy files:
    #
    #     unlimited:  These policy files contain no restrictions on cryptographic
    #                 strengths or algorithms.
    #
    #     limited:    These policy files contain more restricted cryptographic
    #                 strengths, and are still available if your country or
    #                 usage requires the traditional restrictive policy.
    #
    # The JDK JCE framework uses the unlimited policy files by default.
    # However the user may explicitly choose a set either by defining the
    # "crypto.policy" Security property or by installing valid JCE policy
    # jar files into the traditional JDK installation location.  To better
    # support older JDK Update releases, the "crypto.policy" property is not
    # defined by default.  See below for more information.
    #
    # The following logic determines which policy files are used:
    #
    #         <java-home> refers to the directory where the JRE was
    #         installed and may be determined using the "java.home"
    #         System property.
    #
    # 1.  If the Security property "crypto.policy" has been defined,
    #     then the following mechanism is used:
    #
    #     The policy files are stored as jar files in subdirectories of
    # <java-home>/lib/security/policy.  Each directory contains a complete
    # set of policy files.
    #
    #     The "crypto.policy" Security property controls the directory
    #     selection, and thus the effective cryptographic policy.
    #
    # The default set of directories is:
    #
    #     limited | unlimited
    #
    # 2.  If the "crypto.policy" property is not set and the traditional
    #     US_export_policy.jar and local_policy.jar files
    #     (e.g. limited/unlimited) are found in the legacy
    #     <java-home>/lib/security directory, then the rules embedded within
    #     those jar files will be used. This helps preserve compatibility
    # for users upgrading from an older installation.
    #
    # 3.  If the jar files are not present in the legacy location
    #     and the "crypto.policy" Security property is not defined,
    #     then the JDK will use the unlimited settings (equivalent to
    #     crypto.policy=unlimited)
    #
    # Please see the JCA documentation for additional information on these
    # files and formats.
    #
    # YOU ARE ADVISED TO CONSULT YOUR EXPORT/IMPORT CONTROL COUNSEL OR ATTORNEY
    # TO DETERMINE THE EXACT REQUIREMENTS.
    #
    # Please note that the JCE for Java SE, including the JCE framework,
    # cryptographic policy files, and standard JCE providers provided with
    # the Java SE, have been reviewed and approved for export as mass market
    # encryption item by the US Bureau of Industry and Security.
    #
    # Note: This property is currently used by the JDK Reference implementation.
    # It is not guaranteed to be examined and used by other implementations.
    #
    #crypto.policy=unlimited

    # CORBA ORBIorTypeCheckRegistryFilter
    # Type check enhancement for ORB::string_to_object processing
    #
    # An IOR type check filter, if configured, is used by an ORB during
    # an ORB::string_to_object invocation to check the veracity of the type encoded
    # in the ior string.
    #
    # The filter pattern consists of a semi-colon separated list of class names.
    # The configured list contains the binary class names of the IDL interface types
    # corresponding to the IDL stub class to be instantiated.
    # As such, a filter specifies a list of IDL stub classes that will be
    # allowed by an ORB when an ORB::string_to_object is invoked.
    # It is used to specify a white list configuration of acceptable
    # IDL stub types which may be contained in a stringified IOR
    # parameter passed as input to an ORB::string_to_object method.
    #
    # Note: This property is currently used by the JDK Reference implementation.
    # It is not guaranteed to be examined and used by other implementations.
    #
    #com.sun.CORBA.ORBIorTypeCheckRegistryFilter=binary_class_name;binary_class_name

    #
    # JCEKS Encrypted Key Serial Filter
    #
    # This filter, if configured, is used by the JCEKS KeyStore during the
    # deserialization of the encrypted Key object stored inside a key entry.
    # If not configured or the filter result is UNDECIDED (i.e. none of the patterns
    # matches), the filter configured by jdk.serialFilter will be consulted.
    #
    # If the system property jceks.key.serialFilter is also specified, it supersedes
    # the security property value defined here.
    #
    # The filter pattern uses the same format as jdk.serialFilter. The default
    # pattern allows javax.crypto.spec.SecretKeySpec, javax.security.auth.kerberos.*,
    # com.ibm.crypto.provider.*, com.ibm.crypto.fips.provider.*, com.ibm.crypto.plus.provider.*,
    # com.ibm.security.x509.*, java.math.BigInteger;,
    # and java.lang.Number and rejects all the others.
    jceks.key.serialFilter = javax.crypto.spec.SecretKeySpec;\
      javax.security.auth.kerberos.*;com.ibm.crypto.provider.*;\
      com.ibm.crypto.fips.provider.*;com.ibm.crypto.plus.provider.*;\
      com.ibm.security.x509.*;java.math.BigInteger;java.lang.Number;\
      java.lang.Enum;java.security.KeyRep;java.security.KeyRep$Type;!*
    #
    # Policies for distrusting Certificate Authorities (CAs).
    #
    # This is a comma separated value of one or more case-sensitive strings, each
    # of which represents a policy for determining if a CA should be distrusted.
    # The supported values are:
    #
    #   SYMANTEC_TLS : Distrust TLS Server certificates anchored by a Symantec
    #   root CA and issued after April 16, 2019 unless issued by one of the
    #   following subordinate CAs which have a later distrust date:
    #     1. Apple IST CA 2 - G1, SHA-256 fingerprint:
    #        AC2B922ECFD5E01711772FEA8ED372DE9D1E2245FCE3F57A9CDBEC77296A424B
    #        Distrust after December 31, 2019.
    #     2. Apple IST CA 8 - G1, SHA-256 fingerprint:
    #        A4FE7C7F15155F3F0AEF7AAA83CF6E06DEB97CA3F909DF920AC1490882D488ED
    #        Distrust after December 31, 2019.
    #
    # Leading and trailing whitespace surrounding each value are ignored.
    # Unknown values are ignored. If the property is commented out or set to the
    # empty String, no policies are enforced.
    #
    # Note: This property is currently used by the JDK Reference implementation.
    # It is not guaranteed to be supported by other SE implementations. Also, this
    # property does not override other security properties which can restrict
    # certificates such as jdk.tls.disabledAlgorithms or
    # jdk.certpath.disabledAlgorithms; those restrictions are still enforced even
    # if this property is not enabled.
    #
    jdk.security.caDistrustPolicies=SYMANTEC_TLS

    #
    # Policies for the proxy_impersonator Kerberos ccache configuration entry
    #
    # The proxy_impersonator ccache configuration entry indicates that the ccache
    # is a synthetic delegated credential for use with S4U2Proxy by an intermediate
    # server. The ccache file should also contain the TGT of this server and
    # an evidence ticket from the default principal of the ccache to this server.
    #
    # This security property determines how Java uses this configuration entry.
    # There are 3 possible values:
    #
    #  no-impersonate     - Ignore this configuration entry, and always act as
    #                       the owner of the TGT (if it exists).
    #
    #  try-impersonate    - Try impersonation when this configuration entry exists.
    #                       If no matching TGT or evidence ticket is found,
    #                       fallback to no-impersonate.
    #
    #  always-impersonate - Always impersonate when this configuration entry exists.
    #                       If no matching TGT or evidence ticket is found,
    #                       no initial credential is read from the ccache.
    #
    # The default value is "always-impersonate".
    #
    # If a system property of the same name is also specified, it supersedes the
    # security property value defined here.
    #
    #jdk.security.krb5.default.initiate.credential=always-impersonate

    #
    # The policy for the XML Signature secure validation mode. The mode is
    # enabled by setting the property "org.jcp.xml.dsig.secureValidation" to
    # true with the javax.xml.crypto.XMLCryptoContext.setProperty() method,
    # or by running the code with a SecurityManager.
    #
    #   Policy:
    #       Constraint {"," Constraint }
    #   Constraint:
    #       AlgConstraint | MaxTransformsConstraint | MaxReferencesConstraint |
    #       ReferenceUriSchemeConstraint | KeySizeConstraint | OtherConstraint
    #   AlgConstraint
    #       "disallowAlg" Uri
    #   MaxTransformsConstraint:
    #       "maxTransforms" Integer
    #   MaxReferencesConstraint:
    #       "maxReferences" Integer
    #   ReferenceUriSchemeConstraint:
    #       "disallowReferenceUriSchemes" String { String }
    #   KeySizeConstraint:
    #       "minKeySize" KeyAlg Integer
    #   OtherConstraint:
    #       "noDuplicateIds" | "noRetrievalMethodLoops"
    #
    # For AlgConstraint, Uri is the algorithm URI String that is not allowed.
    # See the XML Signature Recommendation for more information on algorithm
    # URI Identifiers. For KeySizeConstraint, KeyAlg is the standard algorithm
    # name of the key type (ex: "RSA"). If the MaxTransformsConstraint,
    # MaxReferencesConstraint or KeySizeConstraint (for the same key type) is
    # specified more than once, only the last entry is enforced.
    #
    # Note: This property is currently used by the JDK Reference implementation. It
    # is not guaranteed to be examined and used by other implementations.
    #
    jdk.xml.dsig.secureValidationPolicy=\
        disallowAlg www.w3.org/.../REC-xslt-19991116,\
        disallowAlg www.w3.org/.../xmldsig-more
        disallowAlg www.w3.org/.../xmldsig-more
        disallowAlg www.w3.org/.../xmldsig-more
        maxTransforms 5,\
        maxReferences 30,\
        disallowReferenceUriSchemes file http https,\
        minKeySize RSA 1024,\
        minKeySize DSA 1024,\
        minKeySize EC 224,\
        noDuplicateIds,\
        noRetrievalMethodLoops

    #
    # Serialization process-wide filter
    #
    # A filter, if configured, is used by java.io.ObjectInputStream during
    # deserialization to check the contents of the stream.
    # A filter is configured as a sequence of patterns, each pattern is either
    # matched against the name of a class in the stream or defines a limit.
    # Patterns are separated by ";" (semicolon).
    # Whitespace is significant and is considered part of the pattern.
    #
    # If the system property jdk.serialFilter is also specified on the command
    # line, it supersedes the security property value defined here.
    #
    # If a pattern includes a "=", it sets a limit.
    # If a limit appears more than once the last value is used.
    # Limits are checked before classes regardless of the order in the sequence of patterns.
    # If any of the limits are exceeded, the filter status is REJECTED.
    #
    #   maxdepth=value - the maximum depth of a graph
    #   maxrefs=value  - the maximum number of internal references
    #   maxbytes=value - the maximum number of bytes in the input stream
    #   maxarray=value - the maximum array length allowed
    #
    # Other patterns, from left to right, match the class or package name as
    # returned from Class.getName.
    # If the class is an array type, the class or package to be matched is the element type.
    # Arrays of any number of dimensions are treated the same as the element type.
    # For example, a pattern of "!example.Foo", rejects creation of any instance or
    # array of example.Foo.
    #
    # If the pattern starts with "!", the status is REJECTED if the remaining pattern
    #   is matched; otherwise the status is ALLOWED if the pattern matches.
    # If the pattern ends with ".**" it matches any class in the package and all subpackages.
    # If the pattern ends with ".*" it matches any class in the package.
    # If the pattern ends with "*", it matches any class with the pattern as a prefix.
    # If the pattern is equal to the class name, it matches.
    # Otherwise, the status is UNDECIDED.
    #
    # Primitive types are not configurable with this filter.
    #
    #jdk.serialFilter=pattern;pattern

    #
    # RMI Registry Serial Filter
    #
    # The filter pattern uses the same format as jdk.serialFilter.
    # This filter can override the builtin filter if additional types need to be
    # allowed or rejected from the RMI Registry or to decrease limits but not
    # to increase limits.
    # If the limits (maxdepth, maxrefs, or maxbytes) are exceeded, the object is rejected.
    #
    # The maxdepth of any array passed to the RMI Registry is set to
    # 10000.  The maximum depth of the graph is set to 20.
    # These limits can be reduced via the maxarray, maxdepth limits.
    #
    sun.rmi.registry.registryFilter=javax.rmi.CORBA.Stub
    # Each non-array type is allowed or rejected if it matches one of the patterns,
    # evaluated from left to right, and is otherwise allowed. Arrays of any
    # component type, including subarrays and arrays of primitives, are allowed.
    #
    # Array construction of any component type, including subarrays and arrays of
    # primitives, are allowed unless the length is greater than the maxarray limit.
    # The filter is applied to each array element.
    #
    # The built-in filter allows subclasses of allowed classes and
    # can approximately be represented as the pattern:
    #
    #sun.rmi.registry.registryFilter=\
    #    maxarray=1000000;\
    #    maxdepth=20;\
    #    java.lang.String;\
    #    java.lang.Number;\
    #    java.lang.reflect.Proxy;\
    #    java.rmi.Remote;\
    #    sun.rmi.server.UnicastRef;\
    #    sun.rmi.server.RMIClientSocketFactory;\
    #    sun.rmi.server.RMIServerSocketFactory;\
    #    java.rmi.activation.ActivationID;\
    #    java.rmi.server.UID
    #
    # RMI Distributed Garbage Collector (DGC) Serial Filter
    #
    # The filter pattern uses the same format as jdk.serialFilter.
    # This filter can override the builtin filter if additional types need to be
    # allowed or rejected from the RMI DGC.
    #
    # The builtin DGC filter can approximately be represented as the filter pattern:
    #
    #sun.rmi.transport.dgcFilter=\
    #    java.rmi.server.ObjID;\
    #    java.rmi.server.UID;\
    #    java.rmi.dgc.VMID;\
    #    java.rmi.dgc.Lease;\
    #    maxdepth=5;maxarray=10000

    /Michael

  • Verified Answer

    Hi

    A upgrade to SSPR v4.5.0.4 solved the problem

    New settting in java.security filen

    jdk.tls.disabledAlgorithms=SSLv3, RC4, DES, MD5withRSA, DH keySize < 2048, DESede, \
        EC keySize < 224, 3DES_EDE_CBC, anon, NULL

    Best regards

    Michael