Data Protector 9.08 Digital signiature problems during upgrade of windows 2003,2008

I am seeing an issue when I attempt to upgrade my older windows host DP clients from 9.07 to 9.08. Newer windows (2012, etc.) upgrade just fine. Windows installation server is on version 2012 with DP 9.08. The cell manager is RHEL 6 w/9.08. Here is what I get on older windows hosts when I try to upgrade them to 9.08 from 9.07, seems to be all older win2003, and win2008. I've been running on 9.07 for months now without issue.

[Critical] <HOSTNAME> [70:32] Digital Signature verification of the install kit failed.

[Critical] <HOSTNAME> Cannot start setup process from the Data Protector share on
your Installation Server, system error:
[87] The parameter is incorrect.
(System error should give description of the problem.)

In general:
* Make sure that Data Protector share on your Installation Server is visible on the network
(in MS-DOS prompt on client type: dir \\<IS_COMPUTER_NAME>\OmniBack)
* Make sure that Data Protector Inet process is not running under a user account, which does
not have access to the Data Protector share on the Installation Server computer
(usually this is local account)

Parents Reply Children
  • Hi Adam,

    I've closed the case now because I've found an acceptable workaround (only 7 systems affected here):
    I've manually deinstalled the old 9.07 client and reinstalled the 9.08 client from the installation share.
    It works on both Windows 2008 64bit SP2 and old Windows 2003 32bit without a problem.
    Perhaps you do have more luck with your case.

    Kind regards
    Guido

  • Thanks, question: after you uninstalled 9.07 manually, did you have to also __manually__ reinstall by mounting the share or etc. or were you able to just use the DP GUI to install 9.08 like it was a new client? Basically, I am wondering if the reinstall of 9.08 was the same as if you were just adding a new client or if instead you had to do something manual with the installation share on the 2003 or 2008 system to run the install kit. I've only got about 15 or so and I could probably do them manually as a workaround as well. also 9.07 seems to be working, so I may just do nothing if the case goes no where.

  • I am seeing this issue with a Windows 2008 R2 box as well.  Same errors...

    [Critical] <test> [70:32] Digital Signature verification of the install kit failed.

    [Critical] <test> [70:32] Digital Signature verification of the install kit failed.

    [Critical] <test> Cannot start setup process from the Data Protector share on

    your Installation Server, system error:

    [87] The parameter is incorrect.

    (System error should give description of the problem.)

    In general:

    * Make sure that Data Protector share on your Installation Server is visible on the network

    (in MS-DOS prompt on client type: dir \\<IS_COMPUTER_NAME>\OmniBack)

    * Make sure that Data Protector Inet process is not running under a user account, which does

    not have access to the Data Protector share on the Installation Server computer

    (usually this is local account) 

    [Critical] <test> [110:1026] Lost connection to client test1:

    Details unknown.

     

  • I am seeing this issue with a Windows 2008 R2 box as well.  Same errors...

    [Critical] <test> [70:32] Digital Signature verification of the install kit failed.

    [Critical] <test> [70:32] Digital Signature verification of the install kit failed.

    [Critical] <test> Cannot start setup process from the Data Protector share on

    your Installation Server, system error:

    [87] The parameter is incorrect.

    (System error should give description of the problem.)

    In general:

    * Make sure that Data Protector share on your Installation Server is visible on the network

    (in MS-DOS prompt on client type: dir \\<IS_COMPUTER_NAME>\OmniBack)

    * Make sure that Data Protector Inet process is not running under a user account, which does

    not have access to the Data Protector share on the Installation Server computer

    (usually this is local account) 

    [Critical] <test> [110:1026] Lost connection to client test1:

    Details unknown.

     

  • I am seeing this issue with a Windows 2008 R2 box as well.  Same errors...

    [Critical] <test> [70:32] Digital Signature verification of the install kit failed.

    [Critical] <test> [70:32] Digital Signature verification of the install kit failed.

    [Critical] <test> Cannot start setup process from the Data Protector share on

    your Installation Server, system error:

    [87] The parameter is incorrect.

    (System error should give description of the problem.)

    In general:

    * Make sure that Data Protector share on your Installation Server is visible on the network

    (in MS-DOS prompt on client type: dir \\<IS_COMPUTER_NAME>\OmniBack)

    * Make sure that Data Protector Inet process is not running under a user account, which does

    not have access to the Data Protector share on the Installation Server computer

    (usually this is local account) 

    [Critical] <test> [110:1026] Lost connection to client test1:

    Details unknown.

     

  • we had a similar error and solved it by changing the following registry entry.....

    Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\SystemCertificates\AuthRoot\

    change DisableRootAuth to ZERO, not 0x000000001

    hope that helps!

  • we had a similar error and solved it by changing the following registry entry.....

    Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\SystemCertificates\AuthRoot\

    change DisableRootAuth to ZERO, not 0x000000001

    hope that helps!

  • we had a similar error and solved it by changing the following registry entry.....

    Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\SystemCertificates\AuthRoot\

    change DisableRootAuth to ZERO, not 0x000000001

    hope that helps!

  • Hi Adam,

    I did a manual reinstall from the installation share without the DP GUI.
    Have you tried changing the client registry that KloppYNWA69 suggested?

    Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\SystemCertificates\AuthRoot\
    change DisableRootAuth to ZERO, not 0x000000001

    Kind regards
    Guido

     

  • Hi Adam,

    I did a manual reinstall from the installation share without the DP GUI.
    Have you tried changing the client registry that KloppYNWA69 suggested?

    Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\SystemCertificates\AuthRoot\
    change DisableRootAuth to ZERO, not 0x000000001

    Kind regards
    Guido