• State Not Answered
  • Replies replies
    10
  • Subscribers subscribers
    15
  • Views views
    698
  • Users 0 members are here
  • Locked Locked
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

GW2014R2 DVA Issues, Errors in Logs

squartec
Good Morning,
We upgraded our GW 8 system to GW2014R2 mid May. Since then, i've been fighting fires that come with an upgrade, but I have a few issues that continue to give us grief, one huge thorn being the DVA.

We have 10 PO Servers, each running SLES 11 SP3 and OES 11 SP2, running on virtuals with 2 CPUs and 8GB Ram. Each PO server has a DVA on it and assigned to it and the DVAs are SSL enabled. I am also monitoring the DVAs in Monitor, and while the DVAs are up, I'm finding when the DVA's aren't crashing there are errors in the logs.
I restarted all DVAs yesterday morning (because either the processes were dead, or there were errors in the logs) and again this morning, errors are appearing in the logs in all DVAs

HTTP: Internal Error (8f17) in processing (DCA) Request made from (IP Address)
HTTP: Internal Error (8912) in processing (DCA) Request made from (IP Address)

QF indexing is set up to run every 24 hrs starting at 2000 hours.
Going from Gw8 to 2014 the DVAs are new to us and i'm not sure if I'm missing something or why we are having issues with all of our DVAs.?
Any insight is appreciated!
Cheers,
Catia

Tags:

Parents
  • 0
    On Wed, 08 Jun 2016 12:46:03 GMT, squartec
    <squartec@no-mx.forums.microfocus.com> wrote:

    >
    >Good Morning,
    >We upgraded our GW 8 system to GW2014R2 mid May. Since then, i've been
    >fighting fires that come with an upgrade, but I have a few issues that
    >continue to give us grief, one huge thorn being the DVA.
    >
    >We have 10 PO Servers, each running SLES 11 SP3 and OES 11 SP2, running
    >on virtuals with 2 CPUs and 8GB Ram. Each PO server has a DVA on it and
    >assigned to it and the DVAs are SSL enabled. I am also monitoring the
    >DVAs in Monitor, and while the DVAs are up, I'm finding when the DVA's
    >aren't crashing there are errors in the logs.
    >I restarted all DVAs yesterday morning (because either the processes
    >were dead, or there were errors in the logs) and again this morning,
    >errors are appearing in the logs in all DVAs
    >
    >HTTP: Internal Error (8f17) in processing (DCA) Request made from (IP
    >Address)
    >HTTP: Internal Error (8912) in processing (DCA) Request made from (IP
    >Address)
    >
    >QF indexing is set up to run every 24 hrs starting at 2000 hours.
    >Going from Gw8 to 2014 the DVAs are new to us and i'm not sure if I'm
    >missing something or why we are having issues with all of our DVAs.?
    >Any insight is appreciated!
    >Cheers,
    >Catia

    Make sure you are on the latest build...at least HP1 (Build 123047).

    One thought...even though the DVAs were running on my servers, I
    didn't actually have them created and assigned to POAs in the
    GroupWise Admin Console. Tech Support had me do that. Since doing
    that 5 days ago, things have been stable. I'm not sure if it is
    coincidence or if it has actually fixed it for me. But worth
    considering just in case.

    Ken

    --------------------------------------------------------
    Create and vote for enhancements!
    https://www.novell.com/products/enhancement-request.html
  • 0 in reply to 
    Thanks Ken! I should of stated we are on R2 HP1. And yes, all the DVAs are created and assigned to the POs in the GW Admin Console. Are you using SSL for your DVAs? I'm not sure if that's an issue or not, just wondering if that may be part of the problem.
  • 0 in reply to 
    Hi,

    If I am not mistaken, what Ken was suggesting was to open a Service Request with Novell Technical Support and get the latest, not yet public, release of GroupWise as that contains many fixes.

    Cheers,
  • 0 in reply to 
    On Wed, 08 Jun 2016 16:56:02 GMT, laurabuckley
    <laurabuckley@no-mx.forums.microfocus.com> wrote:

    >
    >Hi,
    >
    >If I am not mistaken, what Ken was suggesting was to open a Service
    >Request with Novell Technical Support and get the latest, not yet
    >public, release of GroupWise as that contains many fixes.
    >
    >Cheers,

    Laura,
    Actually, I am running HP1 (Build 123047), but I have an SR open at
    the moment. Is there a newer build I should be asking for that helps
    with DVA issues?
    Ken

    --------------------------------------------------------
    Create and vote for enhancements!
    https://www.novell.com/products/enhancement-request.html
  • 0 in reply to 
    Hi Ken,

    As far as I am aware there is an FTF version available but I'm not sure of the build number. Let me ask around for you.

    Cheers,
  • 0 in reply to 
    Hi Ken,

    If I understand the information received correctly, then the latest FTF build is 123853 - I personally don't have this yet so can't talk to the issues resolved in it.

    Cheers,
Reply Children

Resources

Support
Documentation
Learning Services
Partner Programs
Privacy
Compliance
Help
Company
Privacy Policy
Terms of Use
Cookies Preferences
Accessibility
Anti-Slavery Statement
Support
Contact Us
Careers
Code of Business Conduct and Ethics
The opinions expressed above are the personal opinions of the authors, not of OpenText. By using this site, you accept the Terms of Use. Certain versions of content ("Material") accessible here may contain branding from Hewlett-Packard Company (now HP Inc.), Hewlett Packard Enterprise Company, or Micro Focus. As of January 31, 2023, the Material is now offered by OpenText, a separately owned and operated company. Any reference to the HP, Hewlett Packard Enterprise/HPE, and Micro Focus marks is historical in nature and the HP, Hewlett Packard Enterprise/HPE, and Micro Focus marks are the property of their respective owners.