This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Notify won't launch for my account

Running GroupWise 2014 (14.0.1) on Win 7

Have been running fine with no problems for about 4 or 5 months. I was
deleting old GW accounts in Gwadmin last week and suddenly began getting the
following errors on my workstation:

c05d "Dependent store file does not exist on the disk."
c067 "Database store number is invalid."

I figured something had gone wrong while I was deleting accounts and waited
for the storm of user calls, but they never came.At this time, my Notify was
running and behaving properly, but I continued to get the c067 errors every
few minutes.

I restarted my GroupWise client to make sure there were no problems logging
in. The client came up with no problems, but after a few seconds, I got a
dialog box labeled Notify that said "Failed to connect to GroupWise." I
click OK and everything works, except Notify.

I checked Tools > Options > Security > Notify and saw my name listed in the
Notification list about a dozen times. I ran the GWCheck with the
delsubscriberecords option. All instances of my name are now gone from the
list, but if I try to add my name back to the list, the GroupWise client
crashes and closes.

I am experiencing the same behavior on different workstations with both GW 8
and GW 2014 on Win XP and Win 7 respectively. Any ideas what to try next?


Tags:

Parents
  • 0
    Jerry,

    I'd try a structural rebuild of your user database.

    Uwe

    --
    Novell Knowledge Partner
    Please don't send me support related e-mail unless I ask you to do so.
  • 0 in reply to 
    Tried the structural rebuild on my user database. No luck. Still can't add
    my name back to the notification list.


    "Uwe Buckesfeld" <u.buckesfeld@web.de> wrote in message
    news:S%PHx.1168$Qq2.403@novprvlin0913.provo.novell.com...
    > Jerry,
    >
    > I'd try a structural rebuild of your user database.
    >
    > Uwe
    >
    > --
    > Novell Knowledge Partner
    > Please don't send me support related e-mail unless I ask you to do so.



  • 0 in reply to 
    Jerry,

    any errors in the gwcheck log?
    You may want to take a look at this TID:
    https://www.novell.com/support/kb/doc.php?id=7002351

    Uwe

    --
    Novell Knowledge Partner
    Please don't send me support related e-mail unless I ask you to do so.
  • 0 in reply to 
    No errors in the gwcheck log.

    Would that TID still apply even though I am not getting the errors anymore?
    They stopped as soon as I restarted my client and I haven't seen them since.
    It was as if Notify was still running on my PC, but couldn't connect to the
    PO so it was generating errors. Once I shut Notify down, it would not
    restart, so I get no errors.


    "Uwe Buckesfeld" <u.buckesfeld@web.de> wrote in message
    news:PYzJx.1272$Qq2.514@novprvlin0913.provo.novell.com...
    > Jerry,
    >
    > any errors in the gwcheck log?
    > You may want to take a look at this TID:
    > https://www.novell.com/support/kb/doc.php?id=7002351
    >
    > Uwe
    >
    > --
    > Novell Knowledge Partner
    > Please don't send me support related e-mail unless I ask you to do so.



  • 0   in reply to 
    In article <PVAJx.1284$Qq2.755@novprvlin0913.provo.novell.com>, Jerry G
    wrote:
    > Would that TID still apply even though I am not getting the errors anymore?


    Possibly not, it depends on if you can find the appropriate line in the POA
    logs, in which case it would be good to run.
    Otherwise I would run through a more general set of GWChecks that you should
    be running anyways, and then checking the resulting logs to make all issues
    are actually cleared out (i.e. They don't continue to show on subsequent
    GWChecks.)
    http://www.konecnyad.ca/andyk/gwmnt5x.htm


    Andy of
    http://KonecnyConsulting.ca in Toronto
    Knowledge Partner
    http://forums.novell.com/member.php/75037-konecnya
    If you find a post helpful and are logged in the Web interface, please show
    your appreciation by clicking on the star below. Thanks!

    ________________________

    Andy of KonecnyConsulting.ca in Toronto
    Please use the "Like" and/or "Verified Answers" as appropriate as that helps us all.

  • 0 in reply to   
    My POA logs only go back 7 days and this happened 12 days ago, so nothing to
    check.

    I do have most of the weekly maintenance running already (except for the
    disk check and big attachment check). The logs showed nonthing but "error 39
    Unrecognized files in mail directories" and "error 66 Files too recent to be
    deleted". The error 39 files were .dba copies of my user database and I
    assume the msg database containing my messages (msg56.dba) that were created
    on 9/10 when I did the structural rebuild on my user database.

    I found out today that one other user got the same c05d and c067 errors that
    I got at the same time when I was deleteing old user accounts, but he does
    not use Notify (says it's distracting).

    "Andy Konecny" <konecnya@no-mx.forums.microfocus.com> wrote in message
    news:VA.00000867.0318119c@no-mx.forums.microfocus.com...
    > In article <PVAJx.1284$Qq2.755@novprvlin0913.provo.novell.com>, Jerry G
    > wrote:
    >> Would that TID still apply even though I am not getting the errors
    >> anymore?

    >
    > Possibly not, it depends on if you can find the appropriate line in the
    > POA
    > logs, in which case it would be good to run.
    > Otherwise I would run through a more general set of GWChecks that you
    > should
    > be running anyways, and then checking the resulting logs to make all
    > issues
    > are actually cleared out (i.e. They don't continue to show on subsequent
    > GWChecks.)
    > http://www.konecnyad.ca/andyk/gwmnt5x.htm
    >
    >
    > Andy of
    > http://KonecnyConsulting.ca in Toronto
    > Knowledge Partner
    > http://forums.novell.com/member.php/75037-konecnya
    > If you find a post helpful and are logged in the Web interface, please
    > show
    > your appreciation by clicking on the star below. Thanks!
    >



  • 0   in reply to 
    In article <O50Kx.1314$Qq2.360@novprvlin0913.provo.novell.com>, Jerry G wrote:
    > I found out today that one other user got the same c05d and c067 errors that
    > I got at the same time when I was deleteing old user accounts, but he does
    > not use Notify (says it's distracting).


    So this sounds more like it was a transient problem that just confused two
    clients, your notify and the other users full client. Does that other user
    have any issues since then? Can he start up notify?
    Pity the POA logs don't go that far back (backups?) as they most certainly show
    some interesting things at that time.

    I am assuming On-line mode and not Caching mode from what you've said, but
    please confirm that.

    Perhaps a reset of client options may do the trick.
    A re-create user database would be the measure of last resort as you would lose
    all personalization, including folders, so perhaps opening an SR would be the
    step to do first.


    Andy of
    http://KonecnyConsulting.ca in Toronto
    Knowledge Partner
    http://forums.novell.com/member.php/75037-konecnya
    If you find a post helpful and are logged in the Web interface, please show
    your appreciation by clicking on the star below. Thanks!

    ________________________

    Andy of KonecnyConsulting.ca in Toronto
    Please use the "Like" and/or "Verified Answers" as appropriate as that helps us all.

  • 0 in reply to   
    Not sure what fixed it, but my "Contents check" did not match the
    recommended one in your list, but after that ran this weekend, my Notify is
    working again.


    "Andy Konecny" <konecnya@no-mx.forums.microfocus.com> wrote in message
    news:VA.0000086e.025d0ae4@no-mx.forums.microfocus.com...
    > In article <O50Kx.1314$Qq2.360@novprvlin0913.provo.novell.com>, Jerry G
    > wrote:
    >> I found out today that one other user got the same c05d and c067 errors
    >> that
    >> I got at the same time when I was deleteing old user accounts, but he
    >> does
    >> not use Notify (says it's distracting).

    >
    > So this sounds more like it was a transient problem that just confused two
    > clients, your notify and the other users full client. Does that other
    > user
    > have any issues since then? Can he start up notify?
    > Pity the POA logs don't go that far back (backups?) as they most certainly
    > show
    > some interesting things at that time.
    >
    > I am assuming On-line mode and not Caching mode from what you've said, but
    > please confirm that.
    >
    > Perhaps a reset of client options may do the trick.
    > A re-create user database would be the measure of last resort as you would
    > lose
    > all personalization, including folders, so perhaps opening an SR would be
    > the
    > step to do first.
    >
    >
    > Andy of
    > http://KonecnyConsulting.ca in Toronto
    > Knowledge Partner
    > http://forums.novell.com/member.php/75037-konecnya
    > If you find a post helpful and are logged in the Web interface, please
    > show
    > your appreciation by clicking on the star below. Thanks!
    >



Reply
  • 0 in reply to   
    Not sure what fixed it, but my "Contents check" did not match the
    recommended one in your list, but after that ran this weekend, my Notify is
    working again.


    "Andy Konecny" <konecnya@no-mx.forums.microfocus.com> wrote in message
    news:VA.0000086e.025d0ae4@no-mx.forums.microfocus.com...
    > In article <O50Kx.1314$Qq2.360@novprvlin0913.provo.novell.com>, Jerry G
    > wrote:
    >> I found out today that one other user got the same c05d and c067 errors
    >> that
    >> I got at the same time when I was deleteing old user accounts, but he
    >> does
    >> not use Notify (says it's distracting).

    >
    > So this sounds more like it was a transient problem that just confused two
    > clients, your notify and the other users full client. Does that other
    > user
    > have any issues since then? Can he start up notify?
    > Pity the POA logs don't go that far back (backups?) as they most certainly
    > show
    > some interesting things at that time.
    >
    > I am assuming On-line mode and not Caching mode from what you've said, but
    > please confirm that.
    >
    > Perhaps a reset of client options may do the trick.
    > A re-create user database would be the measure of last resort as you would
    > lose
    > all personalization, including folders, so perhaps opening an SR would be
    > the
    > step to do first.
    >
    >
    > Andy of
    > http://KonecnyConsulting.ca in Toronto
    > Knowledge Partner
    > http://forums.novell.com/member.php/75037-konecnya
    > If you find a post helpful and are logged in the Web interface, please
    > show
    > your appreciation by clicking on the star below. Thanks!
    >



Children
  • 0   in reply to 
    In article <7SWLx.1420$Qq2.68@novprvlin0913.provo.novell.com>, Jerry G wrote:
    > Not sure what fixed it, but my "Contents check" did not match the
    > recommended one in your list, but after that ran this weekend, my Notify is
    > working again.


    What was the difference between those checks?
    Glad it helped, that is why I built that list to both remember and share my
    experiences on different systems.


    Andy of
    http://KonecnyConsulting.ca in Toronto
    Knowledge Partner
    http://forums.novell.com/member.php/75037-konecnya
    If you find a post helpful and are logged in the Web interface, please show
    your appreciation by clicking on the star below. Thanks!

    ________________________

    Andy of KonecnyConsulting.ca in Toronto
    Please use the "Like" and/or "Verified Answers" as appropriate as that helps us all.

  • 0 in reply to   
    I made a lot of changes in the weekly maintenance, so I'm not 100% sure. I
    think it was set up correctly but it was conflicting with another event and
    therefore not running.

    It took nine hours to get through for a PO with 75 active mailboxes. Deleted
    over 40K blob files among numerous other deletions and corrections, so it
    doesn't appear to have run in a while.

    All my .log files were named gwcheck.log so I was never quite sure what each
    of the reports I was getting was. Now they have names and I know which is
    which.


    "Andy Konecny" <konecnya@no-mx.forums.microfocus.com> wrote in message
    news:VA.00000874.02f55f7c@no-mx.forums.microfocus.com...
    > In article <7SWLx.1420$Qq2.68@novprvlin0913.provo.novell.com>, Jerry G
    > wrote:
    >> Not sure what fixed it, but my "Contents check" did not match the
    >> recommended one in your list, but after that ran this weekend, my Notify
    >> is
    >> working again.

    >
    > What was the difference between those checks?
    > Glad it helped, that is why I built that list to both remember and share
    > my
    > experiences on different systems.
    >
    >
    > Andy of
    > http://KonecnyConsulting.ca in Toronto
    > Knowledge Partner
    > http://forums.novell.com/member.php/75037-konecnya
    > If you find a post helpful and are logged in the Web interface, please
    > show
    > your appreciation by clicking on the star below. Thanks!
    >



  • 0   in reply to 
    In article <QLcMx.1435$Qq2.826@novprvlin0913.provo.novell.com>, Jerry G wrote:
    > I made a lot of changes in the weekly maintenance, so I'm not 100% sure. I
    > think it was set up correctly but it was conflicting with another event and
    > therefore not running.

    That is always the challenge of all the differing scheduled system jobs. I like
    trying to keep a list of all of them for each client to avoid the collisions.

    > It took nine hours to get through for a PO with 75 active mailboxes. Deleted
    > over 40K blob files among numerous other deletions and corrections, so it
    > doesn't appear to have run in a while.

    It is amazing how well GroupWise can run without that maintenance for so long.
    I friend of mine shared one such GWCheck, was yours as bad as his?
    http://www.konecnyad.ca/andyk/gwchkhurtng.gif The next ones will be much
    shorter.

    > All my .log files were named gwcheck.log so I was never quite sure what each
    > of the reports I was getting was. Now they have names and I know which is
    > which.

    Those names make a world of difference. I also have some search folders under
    the folder a rule dumps all the GWChecks into so that I can quickly zero in on
    just Contents checks, or the audit reports.


    Andy of
    http://KonecnyConsulting.ca in Toronto
    Knowledge Partner
    http://forums.novell.com/member.php/75037-konecnya
    If you find a post helpful and are logged in the Web interface, please show
    your appreciation by clicking on the star below. Thanks!

    ________________________

    Andy of KonecnyConsulting.ca in Toronto
    Please use the "Like" and/or "Verified Answers" as appropriate as that helps us all.

  • 0 in reply to   
    I'd say mine was at least as bad:

    ***** OVERALL STATS FOR THIS RUN *****
    *********************************************************************
    Uncorrectable conditions encountered:
    CODE DESCRIPTION COUNT
    ---- -------------------------------------------------- -----
    50 Orphaned Blob files (deleted)...................... 47092
    51 Invalid Blob files (deleted)....................... 5
    53 Blob files truncated to 0 bytes.................... 2
    Correctable conditions encountered:
    CODE DESCRIPTION COUNT
    ---- -------------------------------------------------- -----
    3 LIN_ATTACHMENT_RECORDs found but not used.......... 7
    7 User Attachments found but not referenced.......... 17
    9 Records missing critical fields.................... 1
    16 Msg records, LIN_ATTACH_DRN pointing to missing rec 1
    19 MSG host recs, LIN_DRN pointing to missing record.. 683
    20 Defer files found, no reference from database...... 9
    22 MSG user recs, LIN_DRN pointing to missing record.. 8
    30 Folder records found with improper parents......... 18
    37 Item records with missing message database recs.... 5
    39 Unrecognized or invalid files in mail directories.. 9
    47 Subscribe records pointing to invalid user......... 3
    66 GWCheck log files in log directory................. 1
    67 Outdated execution records.(notify/alarm).......... 19562
    71 Shared folder references with invalid senders...... 1
    76 Folders/books with distribution list problems...... 40
    77 Attachment records opened but not readable......... 2
    78 Item records with invalid fields................... 15625
    79 Duplicate folder names at same level............... 22
    82 Inaccessible attachment files...................... 5
    93 Unused blob files (deleted)........................ 4435
    94 Shared AB references with invalid senders.......... 5
    96 Records found with duplicate invalid fields........ 117
    98 Category records missing fields.................... 219
    99 Duplicate category names........................... 4
    100 Users missing system categories.................... 2
    102 Contact folders out of sync........................ 46
    105 Access records in need of repair................... 236
    107 Proxy records in need of repair................... 562
    *********************************************************************


    "Andy Konecny" <konecnya@no-mx.forums.microfocus.com> wrote in message
    news:VA.00000878.01413642@no-mx.forums.microfocus.com...
    > In article <QLcMx.1435$Qq2.826@novprvlin0913.provo.novell.com>, Jerry G
    > wrote:
    >> I made a lot of changes in the weekly maintenance, so I'm not 100% sure.
    >> I
    >> think it was set up correctly but it was conflicting with another event
    >> and
    >> therefore not running.

    > That is always the challenge of all the differing scheduled system jobs. I
    > like
    > trying to keep a list of all of them for each client to avoid the
    > collisions.
    >
    >> It took nine hours to get through for a PO with 75 active mailboxes.
    >> Deleted
    >> over 40K blob files among numerous other deletions and corrections, so it
    >> doesn't appear to have run in a while.

    > It is amazing how well GroupWise can run without that maintenance for so
    > long.
    > I friend of mine shared one such GWCheck, was yours as bad as his?
    > http://www.konecnyad.ca/andyk/gwchkhurtng.gif The next ones will be much
    > shorter.
    >
    >> All my .log files were named gwcheck.log so I was never quite sure what
    >> each
    >> of the reports I was getting was. Now they have names and I know which is
    >> which.

    > Those names make a world of difference. I also have some search folders
    > under
    > the folder a rule dumps all the GWChecks into so that I can quickly zero
    > in on
    > just Contents checks, or the audit reports.
    >
    >
    > Andy of
    > http://KonecnyConsulting.ca in Toronto
    > Knowledge Partner
    > http://forums.novell.com/member.php/75037-konecnya
    > If you find a post helpful and are logged in the Web interface, please
    > show
    > your appreciation by clicking on the star below. Thanks!
    >



  • 0   in reply to 
    In article <NVCMx.1473$Qq2.976@novprvlin0913.provo.novell.com>, Jerry G
    wrote:
    > I'd say mine was at least as bad:
    >
    > ***** OVERALL STATS FOR THIS RUN *****


    yup, certainly in the same neighbourhood. Fewer total errors and
    problems, but more problem types. I have prodded my friend with this
    that he has some 'competition' almost like the old NetWare days of how
    many days has this server been up.


    Andy of
    http://KonecnyConsulting.ca in Toronto
    Knowledge Partner
    http://forums.novell.com/member.php/75037-konecnya
    If you find a post helpful and are logged in the Web interface, please
    show your appreciation by clicking on the star below. Thanks!

    ________________________

    Andy of KonecnyConsulting.ca in Toronto
    Please use the "Like" and/or "Verified Answers" as appropriate as that helps us all.