24.2 Success

I thought I would post here. I did the upgrade and all seems good. Still have to dig under the coves first. 

I didn't a reboot after it was done. Was getting nervous after a reboot after upgrade was done. Took

about 15 minutes after the server was booted back up to be able to login again. I will do a reboot

over the weekend to see if it is better or the same. It did go smoother than some have gone in

the past.

Thanks to the dev team.

  • 0  

    i can confirm that the installation was without any trouble/problem. I tale a longer time to download/transfer 17GB to /var/tmp and then run "zman sui ZENWorks.....zip

    At least reconfigure the update registration

    waiting the next days to see the changes, take time to actualize the agents on workstations, etc...

    yes, great job, we had wait very very long time for upgrade from 23.4 to 24.2 and all other products come in july with 24.3

    cg

  • 0   in reply to   

    Note: In regard to timing....ZCM 24.4 is expected to ship very early in Q4 with only minor updates over 24.2.  This will get it back on the expected release cycles of Early Q2/Q4. 

    --

    If you found this post useful, give it a “Like” or click on "Verify Answer" under the "More" button

    Be sure to "Like" My (and a few others) Cool Solutions below! 

    https://community.microfocus.com/members/craigdwilson/bookmarks

  • 0 in reply to   

    I'm still waiting for it to complete. An error of:

    "Unable to retreive the failure root cause

    Note: ZENworks will automatically retry the system update preparation stage on the failed servers. If the error persists, please contact Micro Focus Customer Support.  " doesn't give much away unfortunately. I'll scrabble around to make sure there's more than enough disk space, but a glimse of the log suggests that ZEUS is a part of the issue.

    [DEBUG] [07/04/2024 15:12:56.805] [16] [ThreadedStreamReader] [1470] [zenworks] [SystemUpdate] [] [/opt/microfocus/zenworks/bin/run_preglobal_update:: OUT: FINE: Failed to make post rest call to ZeUS Endpoints ] [] [] [] [SystemUpdate]
    [DEBUG] [07/04/2024 15:12:56.805] [16] [ThreadedStreamReader] [1470] [zenworks] [SystemUpdate] [] [/opt/microfocus/zenworks/bin/run_preglobal_update:: OUT: FINE: Retrying to make post rest call with address: 123.1.156.51] [] [] [] [SystemUpdate]
    [DEBUG] [07/04/2024 15:12:56.867] [16] [ThreadedStreamReader] [1470] [zenworks] [SystemUpdate] [] [/opt/microfocus/zenworks/bin/run_preglobal_update:: OUT: Caused by: org.springframework.web.client.HttpClientErrorException$BadRequest: 400 Bad Request: "<Map><timestamp>2024-07-04T14:12:56.864+00:00</timestamp><status>400</status><error>Bad Request</error><path>/rest/get-zeus-version</path></Map>"] [] [] [] [SystemUpdate]
    [DEBUG] [07/04/2024 15:12:56.867] [16] [ThreadedStreamReader] [1470] [zenworks] [SystemUpdate] [] [/opt/microfocus/zenworks/bin/run_preglobal_update:: OUT: FINE: Failed to make post rest call to ZeUS Endpoints ] [] [] [] [SystemUpdate]
    [DEBUG] [07/04/2024 15:12:56.913] [16] [ThreadedStreamReader] [1470] [zenworks] [SystemUpdate] [] [/opt/microfocus/zenworks/bin/run_preglobal_update:: OUT: FINEST: Updated entry in SystemUpdatePrepareStage for serverUID : 02b2a4e3675cff4193d693064da13e8b and update uid : 5024020000fc50000000002024061012] [] [] [] [SystemUpdate]
    [DEBUG] [07/04/2024 15:12:56.913] [16] [ThreadedStreamReader] [1470] [zenworks] [SystemUpdate] [] [/opt/microfocus/zenworks/bin/run_preglobal_update:: OUT: FINE: Prepare Runner status is : false] [] [] [] [SystemUpdate]
    [DEBUG] [07/04/2024 15:12:56.913] [16] [ThreadedStreamReader] [1470] [zenworks] [SystemUpdate] [] [/opt/microfocus/zenworks/bin/run_preglobal_update:: OUT: FINE: Completed the execution of prepare] [] [] [] [SystemUpdate]
    [DEBUG] [07/04/2024 15:12:56.913] [16] [ThreadedStreamReader] [1470] [zenworks] [SystemUpdate] [] [/opt/microfocus/zenworks/bin/run_preglobal_update:: OUT: FINE: Returned from execute()] [] [] [] [SystemUpdate]
    [DEBUG] [07/04/2024 15:12:56.914] [16] [ThreadedStreamReader] [1470] [zenworks] [SystemUpdate] [] [/opt/microfocus/zenworks/bin/run_preglobal_update:: OUT: FINE: Setting Error status to 1, since execution failed] [] [] [] [SystemUpdate]

    I'll run it overnight and see how it goes...

    Tom

  • 0 in reply to 

    No luck or I'm too impatient. I'll have to open an SR.

    T

  • Suggested Answer

    0   in reply to 

    --

    If you found this post useful, give it a “Like” or click on "Verify Answer" under the "More" button

    Be sure to "Like" My (and a few others) Cool Solutions below! 

    https://community.microfocus.com/members/craigdwilson/bookmarks