on some of our pc's since upgrading to 24.2 when i run zac plp i get "unable to generate patch list". The devices all patch and i can see the patch scan result in the zcc. zac ps and zac pap both work on the device.
Cybersecurity
DevOps Cloud
IT Operations Cloud
If an answer to your question is correct, click on "Verify Answer" under the "More" button. The answer will now appear with a checkmark. Please be sure to always mark answers that resolve your issue as verified. Your fellow Community members will appreciate it! Learn more
on some of our pc's since upgrading to 24.2 when i run zac plp i get "unable to generate patch list". The devices all patch and i can see the patch scan result in the zcc. zac ps and zac pap both work on the device.
I see an older post where this issue was fixed by making sure the current DAU has run.
"zac ps --complete" will ensure the DAU has installed, a patch scan is run and the policy is applied.....
At that point, "zac plp" should work. You may also want to check your DAU schedule.
--
If you found this post useful, give it a “Like” or click on "Verify Answer" under the "More" button
Be sure to "Like" My (and a few others) Cool Solutions below!
https://community.microfocus.com/members/craigdwilson/bookmarks
Zac ps -complete had an error, “There was an error scanning the computer: ANALYZE_FAILED”
It's a double dash....I just tested....single dash does return an error.....
--
If you found this post useful, give it a “Like” or click on "Verify Answer" under the "More" button
Be sure to "Like" My (and a few others) Cool Solutions below!
https://community.microfocus.com/members/craigdwilson/bookmarks
I'm seeing similar on a few systems.
zac ps --complete - runs successfully
zac ps bypasscache - success
zac plp i get - Unable to generate patch list
Rodney
If you found this post useful, give it a "Like" or click on "Verify Answer" under the "More" button. This helps others.
It is doing the same here zac ps --complete works but zac plp still errors with unable to generate patch list
Looks like it was reported to dev today as a known issue.....I don't know many details yet...
--
If you found this post useful, give it a “Like” or click on "Verify Answer" under the "More" button
Be sure to "Like" My (and a few others) Cool Solutions below!
https://community.microfocus.com/members/craigdwilson/bookmarks