Need help ..
Push the UCMDB model/CI to RTSM
Basically, the objective is to push the model/CI from UCMDB to RTSM
Basic info of my setup
1. UCMDB 10.10
2. BSM - RTSM 9.23
3. I Installed the DFP (Probe) in UCMDB
Can you help me how to achieve my objective
By the way, Do i need to install/configure the DFP (probe) in the RTSM ?
P.S. This thread has been moved from Application Perf Mgmt (BAC / BSM) Support and News Forum to CMS and Discovery Support and News Forum. - Hp Forum Moderator
I believe this question should be post in UCMDB side:
You need to setup the integration point on the target server which is the UCMDB in order to push data.
If you need to push CI's from RTSM to UCMDB->configure the integration point in UCMDB.
If you need to push CI's from UCMDB to RTSM ->configure the integration point in RTSM.
Below are the steps for pushing CI's from RTSM to UCMDB:
1. Go to Integration studio and select the UCMDB 9.x
2. Configure the integration point
NOTE: In port you need to select the RTSM port (this is the port of the DPS server - 21212)
3. Do a “Test connection”
4. In “Integration Jobs” select Add Query ( ) configure the job and select the Query
5. Run “Sync All Data” ->
After running the all data sync in the future you need to run only “Sync Changes: ->
You can also check the following DFM guide on page 145 - Work with Population Jobs and page 158 - Integration Point Pane. For further reference, check the page 180 of the Data Flow Management Guide - Integrating Multiple CMDBs:
Hope it helps
Thanks for info
I able to pull data from RTSM to UCMDB
In UCMDB , I create a intrgration point and work fine
for testing purposes I created a mode/CI in RTSM to check if the model/CI that I created will populate to UCMDB and working fine ..
See my screenshot in UCMDB integration
Now (viceversa) is my goal
my objecive is to push CI's from UCMDB to RTSM ?
Can u help me what is the step ?
Do I need to install the probe in RTSM ?
first you should install probe in RTSM
second you have to import CMStoRTSM package will find it in BSM DP server and then configure an integration point from RTSM.
can yo help me the step by step procedure
From installing the probe and too the configuration
because I don't have exprience install the probe in RTSM