Highlighted
Absent Member.
Absent Member.
2221 views

hp-ux and DP

Jump to solution
Hi,
I have an issue with hp-ux and data protector, the DP client(hp-ux system) is not listening on port 5555. I re-installed the DP software many times, but we still have the issue.
The output on a client machine:
netstat -an | grep 5555 -> emplty
how can we fix this issue, is there any methods to add DP services on hp-ux machine.
thanks for your reply.
0 Likes
1 Solution

Accepted Solutions
Highlighted
Absent Member.
Absent Member.
> [...] the telnet to the port 5555 didn't
> replied from the local machine.

As usual, showing an actual command with its
actual output can be more helpful than vague
descriptions or interpretations.

> from the local machine there is no reply

See above. What, exactly, does "no reply"
mean here? What, exactly, did you do? What,
exactly, happened when you did it?

View solution in original post

15 Replies
Highlighted
Absent Member.
Absent Member.
Must be 4 years now since I touched Data Protector... still IIRC there should be an entry in /etc/inetd.conf for DP....

Does:

grep omni /etc/inetd.conf

turn up anything?

HTH

Duncan

HTH

Duncan
0 Likes
Highlighted
Absent Member.
Absent Member.

Dear Friend

check port is open or not
check the file /etc/services and /etc/inetd.conf
if it is not open please open it

Please revert back quickly once it is done.

thanks and regards

Sajjad
0 Likes
Highlighted
Absent Member.
Absent Member.
Thank for your help:
the service is already exist on /etc/services and /etc/inetd.conf.
but the telnet to the port 5555 didn't replied from the local machine.
i have delete and install the DP on the client many times. Any idea please?
0 Likes
Highlighted
Absent Member.
Absent Member.
is inetd running?

#ps -ef|grep -i inetd

try reloading the config. file with:
#inetd -c

start inetd:

#/sbin/init.d/inetd start
0 Likes
Highlighted
Absent Member.
Absent Member.
I assume you did the "telnet test" from remote. Does it work locally? Maybe you have a problem with a firewall between ...

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Likes
Highlighted
Absent Member.
Absent Member.
from the local machine there is no reply
0 Likes
Highlighted
Absent Member.
Absent Member.
Hi:

Run the omnicheck command to verify the DNS connections in the Data Protector cell using the following options:


# omnicheck -dns -host client_name -verbose

# man omnicheck

Check the system's log files on UNIX and setup log files on Windows to determine the problem:

System Log file
UNIX (local installation) /var/adm/sw/swinstall.log

/var/adm/sw/swagent.log

UNIX (remote installation) /var/opt/omni/log/IS_install.log

rgs,

0 Likes
Highlighted
Absent Member.
Absent Member.
u are saying port is open and telnet 5555 hostname is empty

so u have to check all dp services are running or not
omnisv -status

please check if any of dp services is not running please start it again, and revert it back.

Sajjjad
0 Likes
Highlighted
Absent Member.
Absent Member.
I Assume

two reasons

one is dp services is not running properly

second is dp is not installed in u client side

can u check from other client to cell manager
it is pinging or not
please revert back!!!

Sajjad Sahir
0 Likes
Highlighted
Absent Member.
Absent Member.
> [...] the telnet to the port 5555 didn't
> replied from the local machine.

As usual, showing an actual command with its
actual output can be more helpful than vague
descriptions or interpretations.

> from the local machine there is no reply

See above. What, exactly, does "no reply"
mean here? What, exactly, did you do? What,
exactly, happened when you did it?

View solution in original post

Highlighted
Absent Member.
Absent Member.
it is seems that the Dp is not installed correctly, but also i have remove and installed many times:
1-how can we remove from hp-ux: is it true to remove from swremove or we need to delete manually ???????

0 Likes
The opinions expressed above are the personal opinions of the authors, not of Micro Focus. By using this site, you accept the Terms of Use and Rules of Participation. Certain versions of content ("Material") accessible here may contain branding from Hewlett-Packard Company (now HP Inc.) and Hewlett Packard Enterprise Company. As of September 1, 2017, the Material is now offered by Micro Focus, a separately owned and operated company. Any reference to the HP and Hewlett Packard Enterprise/HPE marks is historical in nature, and the HP and Hewlett Packard Enterprise/HPE marks are the property of their respective owners.