jdusc2002 Absent Member.
Absent Member.
5679 views

GWIA Setup Question - MTP Port?

I have my GW8 GWIA running on Windows on the same server as the MTA for the domain it is in. The MTP port for the MTA is 7118. I have MTP for the GWIA set for 7119.

Here's my question... Mail is flowing fine, but I see on the GWIA HTTP console that the MTP Send status keeps flipping between open/closed with this:

Protocol error (B300)

The MTP Status for Receive stays open constantly, so I assume that is referring to port 7119. Port 7118 (I'm guessing) is already in use by the MTA and when the GWIA tries to use it that causes the protocol error.

So, since its Windows and two things can't use the same port, should I just modify the GWIA.CFG file and set /mtpoutport-0 or something?

Any help would be appreciated. Thanks!
Labels (2)
0 Likes
4 Replies
Anonymous_User Absent Member.
Absent Member.

Re: GWIA Setup Question - MTP Port?

I just checked my GWIA via HTTP console and saw something similar. At a glance, I can't say it's the same thing you're getting, but I do see a B300 error and recent closure. As you're seeing, it is only on the Send side.

However, my GWIA is working fine and unless there is a backup of mail (there is not), I'm not going to worry too much about it. It has the appearance of a problem, but exhibits no real symptoms. Kinda like a wart.

That said, if it's working, I wouldn't put too much effort in trying to get rid of it.


Aaron
0 Likes
Anonymous_User Absent Member.
Absent Member.

Re: GWIA Setup Question - MTP Port?

jdusc2002 wrote:
> I have my GW8 GWIA running on Windows on the same server as the MTA for
> the domain it is in. The MTP port for the MTA is 7118. I have MTP for
> the GWIA set for 7119.
>
> Here's my question... Mail is flowing fine, but I see on the GWIA HTTP
> console that the MTP Send status keeps flipping between open/closed with
> this:
>
> Protocol error (B300)
>
> The MTP Status for Receive stays open constantly, so I assume that is
> referring to port 7119. Port 7118 (I'm guessing) is already in use by
> the MTA and when the GWIA tries to use it that causes the protocol
> error.
>
> So, since its Windows and two things can't use the same port, should I
> just modify the GWIA.CFG file and set /mtpoutport-0 or something?
>
> Any help would be appreciated. Thanks!
>
>

The MTP has always been weird with GWIA. I would just set it to 0 unless
you specifically are needing outward redundancy.
0 Likes
Anonymous_User Absent Member.
Absent Member.

Re: GWIA Setup Question - MTP Port?

I had Novell tech support look into yesterday and they set it to 0.
He said Novell states it's not needed in a single domain/PO scenario.

JLM

mikebell90;1818469 wrote:
jdusc2002 wrote:
> I have my GW8 GWIA running on Windows on the same server as the MTA for
> the domain it is in. The MTP port for the MTA is 7118. I have MTP for
> the GWIA set for 7119.
>
> Here's my question... Mail is flowing fine, but I see on the GWIA HTTP
> console that the MTP Send status keeps flipping between open/closed with
> this:
>
> Protocol error (B300)
>
> The MTP Status for Receive stays open constantly, so I assume that is
> referring to port 7119. Port 7118 (I'm guessing) is already in use by
> the MTA and when the GWIA tries to use it that causes the protocol
> error.
>
> So, since its Windows and two things can't use the same port, should I
> just modify the GWIA.CFG file and set /mtpoutport-0 or something?
>
> Any help would be appreciated. Thanks!
>
>

The MTP has always been weird with GWIA. I would just set it to 0 unless
you specifically are needing outward redundancy.
0 Likes
Anonymous_User Absent Member.
Absent Member.

Re: GWIA Setup Question - MTP Port?

jlmiller wrote:
> I had Novell tech support look into yesterday and they set it to 0.
> He said Novell states it's not needed in a single domain/PO scenario.
>
> JLM


Right, as I said, you only need it if you need to set up multiple
outoing GWIAs to automatically failover.

>
> mikebell90;1818469 Wrote:
>> jdusc2002 wrote:
>>> I have my GW8 GWIA running on Windows on the same server as the MTA

>> for
>>> the domain it is in. The MTP port for the MTA is 7118. I have MTP

>> for
>>> the GWIA set for 7119.
>>>
>>> Here's my question... Mail is flowing fine, but I see on the GWIA

>> HTTP
>>> console that the MTP Send status keeps flipping between open/closed

>> with
>>> this:
>>>
>>> Protocol error (B300)
>>>
>>> The MTP Status for Receive stays open constantly, so I assume that

>> is
>>> referring to port 7119. Port 7118 (I'm guessing) is already in use

>> by
>>> the MTA and when the GWIA tries to use it that causes the protocol
>>> error.
>>>
>>> So, since its Windows and two things can't use the same port, should

>> I
>>> just modify the GWIA.CFG file and set /mtpoutport-0 or something?
>>>
>>> Any help would be appreciated. Thanks!
>>>
>>>

>> The MTP has always been weird with GWIA. I would just set it to 0
>> unless
>> you specifically are needing outward redundancy.

>
>

0 Likes
The opinions expressed above are the personal opinions of the authors, not of Micro Focus. By using this site, you accept the Terms of Use and Rules of Participation. Certain versions of content ("Material") accessible here may contain branding from Hewlett-Packard Company (now HP Inc.) and Hewlett Packard Enterprise Company. As of September 1, 2017, the Material is now offered by Micro Focus, a separately owned and operated company. Any reference to the HP and Hewlett Packard Enterprise/HPE marks is historical in nature, and the HP and Hewlett Packard Enterprise/HPE marks are the property of their respective owners.