Anonymous_User Absent Member.
Absent Member.
1344 views

Re: GroupWise snapins for Nwadmin

> Does any one REALLY need NWADMIN API GW Snapin?
>
> I just tested the following:
>
> 0. Install api gateway to API subdir
> 1. Create a generic gateway with C1 Groupwise. Name it API, type API.
> 2. Set up basic logging, etc.
> 3. Open NGWAPI.PRM (<domain>\wpgate\api subdir) and check

directories,fill
> in other settings.
> 4. Run.
>
> Seems to work with test e-mail, no special snapins needed?
> NGWAPI.PRM is a plain text file.
>
>
>
> Michael J. Bell
> Novell Support Connection Volunteer Sysop
> Author of Guinevere (http://www.openhandhome.com)
>
> PLEASE: Do not e-mail me privately unless specifically asked.
> I'm a volunteer, not a Novell employee!
>
> All opinions and advice provided are MINE alone and NOT Novell's unless
> specifically identified as such.
>
> Novell does not officially monitor these forums.
> Enhancement requests for all Novell products may be made at
> http://support.novell.com/enhancement
>
> "You've got a way to keep me on your side/You give me cause
> for love that I can't hide/For you I know I'd even try to
> turn the tide/Because you're mine, I walk the line"
>
> Johnny Cash (RIP)
>
> <csilva@acanetworks.com> wrote in message
> news:_1qre.4$1V1.0@janeway.provo.novell.com...
> >I need to ge the GroupWise snapins for Nwadmin, in order to fully
> > configure the API gateway.
> > Can someone provide me with this files? or tell me where to get them?
> >
> > thanks

>
>

I needed the same snap-ins to configure the API gateway as well. I need
to set under Required Parameters tab, Adressing Format, to Component
instead of Groupwise.

Is there another way? I got the v5.5.41 GW snap-ins off an old install
but the tab still didn't show up.

I just can't believe that Novell would chop out what seems to be a vital
conifguration piece from ConsoleOne without another workaround.

Thanks,
Michael
Labels (1)
0 Likes
2 Replies
Anonymous_User Absent Member.
Absent Member.

Re: GroupWise snapins for Nwadmin

> > Does any one REALLY need NWADMIN API GW Snapin?
> >
> > I just tested the following:
> >
> > 0. Install api gateway to API subdir
> > 1. Create a generic gateway with C1 Groupwise. Name it API, type API.
> > 2. Set up basic logging, etc.
> > 3. Open NGWAPI.PRM (<domain>\wpgate\api subdir) and check

> directories,fill
> > in other settings.
> > 4. Run.
> >
> > Seems to work with test e-mail, no special snapins needed?
> > NGWAPI.PRM is a plain text file.
> >
> >
> >
> > Michael J. Bell
> > Novell Support Connection Volunteer Sysop
> > Author of Guinevere (http://www.openhandhome.com)
> >
> > PLEASE: Do not e-mail me privately unless specifically asked.
> > I'm a volunteer, not a Novell employee!
> >
> > All opinions and advice provided are MINE alone and NOT Novell's unless
> > specifically identified as such.
> >
> > Novell does not officially monitor these forums.
> > Enhancement requests for all Novell products may be made at
> > http://support.novell.com/enhancement
> >
> > "You've got a way to keep me on your side/You give me cause
> > for love that I can't hide/For you I know I'd even try to
> > turn the tide/Because you're mine, I walk the line"
> >
> > Johnny Cash (RIP)
> >
> > <csilva@acanetworks.com> wrote in message
> > news:_1qre.4$1V1.0@janeway.provo.novell.com...
> > >I need to ge the GroupWise snapins for Nwadmin, in order to fully
> > > configure the API gateway.
> > > Can someone provide me with this files? or tell me where to get them?
> > >
> > > thanks

> >
> >

> I needed the same snap-ins to configure the API gateway as well. I need
> to set under Required Parameters tab, Adressing Format, to Component
> instead of Groupwise.
>
> Is there another way? I got the v5.5.41 GW snap-ins off an old install
> but the tab still didn't show up.
>
> I just can't believe that Novell would chop out what seems to be a vital
> conifguration piece from ConsoleOne without another workaround.
>
> Thanks,
> Michael


0 Likes
Anonymous_User Absent Member.
Absent Member.

Re: GroupWise snapins for Nwadmin

I'll try again (my first reply had no text)...

I'm having the same problem configuring the "addressing format"
to "component" as well. If anyone knows of a way to get this "required
parameter" to work, PLEASE let me know as well.

Many Thanks!
Joey
0 Likes
The opinions expressed above are the personal opinions of the authors, not of Micro Focus. By using this site, you accept the Terms of Use and Rules of Participation. Certain versions of content ("Material") accessible here may contain branding from Hewlett-Packard Company (now HP Inc.) and Hewlett Packard Enterprise Company. As of September 1, 2017, the Material is now offered by Micro Focus, a separately owned and operated company. Any reference to the HP and Hewlett Packard Enterprise/HPE marks is historical in nature, and the HP and Hewlett Packard Enterprise/HPE marks are the property of their respective owners.