Highlighted
Absent Member.. Absent Member..
Absent Member..
2922 views

Failed to add PC Server to ALM

Steps for the error...

 

1.  ALM Installed properly on win 2003 server

2. PC Extension runPCQCconfigurator.bat Executed in ALM platform

3. PC server installed in another win 2003 server

4. While configuring i did following

    a. Given proper win authentication details

    b. Proper ALM url provided

    c. Passpharse given same as the ALM

    d. used PC Extrnal url: http://<PC server IP address>

    e. used PC Internal url: http://<PC server IP address>

5. Am getting error "Failed to add <hostname> to alm url http://<ALM url>

 

Am unable to complete the PC Server configuration.....

 

Finally i used Configure later option and received error log with "Failed to POST Lab server"

 

and also i have tried to configure PC server from Lab Management, am getting error "Failed to pinging url http://<PC Server>/pcs/labserver.svc?wsdl"

 

Note: DB Name in ALM Database is default_lab_project_db

 

Can any one respond, what is the issue? How can i resolve this?

 

Attached server log and error screen shot for reference.... 

 

Thx

CK

0 Likes
7 Replies
Highlighted
Absent Member.
Absent Member.

Re: Failed to add PC Server to ALM

Greetings,

 

If you try accesing from the ALM server the URL: http://<PC Server>/pcs/labserver.svc?wsdl, see if you able to get a response. See if you can access from the PC server the QCbin.

 

Regards,

Mario M.

HP LR/PC Support

If you are customer you can try posting on our internal forums for more personalized support.

LoadRunner:
http://h30499.www3.hp.com/t5/LoadRunner-Support-Customer/bd-p/loadrunner-support-customer-forum

Performance Center:
http://h30499.www3.hp.com/t5/Performance-Center-Support/bd-p/performance-center-support-customer

How to:
http://www.youtube.com/watch?v=4ChlysWupWM

If you find that this or any post resolves your issue, please be sure to mark it as an accepted solution.
0 Likes
Highlighted
Absent Member.. Absent Member..
Absent Member..

Re: Failed to add PC Server to ALM

Hi,

Thanks for your response!!!

I tried to launch the above mentioned url from ALM server, am unable to get the response.
i tried QCbin url from PC server, am able to get response and page loading is fine.

even i also tried above url from PC server, am unable to get response for that, am getting "Page cannot be displayed"

Please give me solution asap!!!

Regards,
CK
0 Likes
Highlighted
Established Member..
Established Member..

Re: Failed to add PC Server to ALM

Hi Chandran

 

Is your issue resolved since i am getting the same issue

 

 

 

0 Likes
Highlighted
Absent Member.. Absent Member..
Absent Member..

Re: Failed to add PC Server to ALM

No Still the issue is coming, Pls some one give the proper solution for this....

0 Likes
Highlighted
Absent Member.. Absent Member..
Absent Member..

Re: Failed to add PC Server to ALM

I beleive that you require active debugging of your configuration and I would strongly suggest that you open a support case so that one of the Support Engineers can assist you.


Craig D

0 Likes
Highlighted
Absent Member.. Absent Member..
Absent Member..

Re: Failed to add PC Server to ALM

How can i open support case? from where i have to do it? Pls assist me on this....

0 Likes
Highlighted
Absent Member.. Absent Member..
Absent Member..

Re: Failed to add PC Server to ALM

The place to open a case is http://support.openview.hp.com.  

 

You must either have an account already or you will need to create one.  You will also need to have your companies SAID number associated to your account.  The SAID number must have a Performance Center 11 purchase associated to it and the SAID must have a current and valid support contract otherwise you will not be able to open a case.  

 

If you don't have your company'sSAID number you will need to find the person in your company that was responsible for the purchase of Performance Center as they received that number via email at the time of purchase. The only other way to get your SAID is from your HP Sales Representative

 

Once you have everything set up properly, click on Service Requests | Submit a new service request and then follow the screens, providing all the details that are requested.  Once you have completed the submission of the case an engineer will be assigned and will contact you.  

 

Good luck,

 

Craig D

0 Likes
The opinions expressed above are the personal opinions of the authors, not of Micro Focus. By using this site, you accept the Terms of Use and Rules of Participation. Certain versions of content ("Material") accessible here may contain branding from Hewlett-Packard Company (now HP Inc.) and Hewlett Packard Enterprise Company. As of September 1, 2017, the Material is now offered by Micro Focus, a separately owned and operated company. Any reference to the HP and Hewlett Packard Enterprise/HPE marks is historical in nature, and the HP and Hewlett Packard Enterprise/HPE marks are the property of their respective owners.