Highlighted
Established Member..
Established Member..
2183 views

How do I bring SItescope Moniters in Load Runner

Jump to solution

Hi Guys,

 

I have configured Jboss(JMX) and SQLServer 2008 Moniters in Sitescope.

I know there is SiteScope under System Resource Graphs under Load Runner Run screen(Controller).

 

Thanks,

Raj

0 Likes
1 Solution

Accepted Solutions
Highlighted
Absent Member.. Absent Member..
Absent Member..

Re: How do I bring SItescope Monitors in Load Runner

Jump to solution

Assuming that you are using LR 9.52 or LR 11:  The first question is, what version of SiteScope are you using.

 

If you are using LR 9.5x or 11 and SiS 9.x the steps below should be what you need.  If you are using SiS 11.1 or 11.2 you may need to open a Support Case to see if your version of SiteScope is supported by the version of LR you are using.

 

If your LR and SiS versions are compatible then:

1) Fully design your load test in controller

2) On the Run Tab in the Available Graphs pane scroll down to the System Resource Graphs & Double Click on SiteScope.  This will change one of the graphs to the right to be the SiteScope Graph

3) Right Click on the SiteScope Graph that was just made available

4) Click Add Measurements

5) Click the Add Button under Monitored Server Machines

6) Enter the IP address or computer name of the SiteScope Server that has the monitors already created

7) Click the Add Button in the Resource Measurements on: xxx.xxx.xxx.xxx

😎 a list of available monitors will be displayed for you to select

View solution in original post

0 Likes
3 Replies
Highlighted
Absent Member.. Absent Member..
Absent Member..

Re: How do I bring SItescope Monitors in Load Runner

Jump to solution

Assuming that you are using LR 9.52 or LR 11:  The first question is, what version of SiteScope are you using.

 

If you are using LR 9.5x or 11 and SiS 9.x the steps below should be what you need.  If you are using SiS 11.1 or 11.2 you may need to open a Support Case to see if your version of SiteScope is supported by the version of LR you are using.

 

If your LR and SiS versions are compatible then:

1) Fully design your load test in controller

2) On the Run Tab in the Available Graphs pane scroll down to the System Resource Graphs & Double Click on SiteScope.  This will change one of the graphs to the right to be the SiteScope Graph

3) Right Click on the SiteScope Graph that was just made available

4) Click Add Measurements

5) Click the Add Button under Monitored Server Machines

6) Enter the IP address or computer name of the SiteScope Server that has the monitors already created

7) Click the Add Button in the Resource Measurements on: xxx.xxx.xxx.xxx

😎 a list of available monitors will be displayed for you to select

View solution in original post

0 Likes
Highlighted
Established Member..
Established Member..

Re: How do I bring SItescope Monitors in Load Runner

Jump to solution

Hi Craig,

 

Got it!

Load Runner and SiteScope both are Compitable (Veresion 11.01)

 

Thank You!

 

-Raj

0 Likes
Highlighted
New Member.

Re: How do I bring SItescope Moniters in Load Runner

Jump to solution

Hi

I am trying to connect sitescope with loadrunner controler i put server name/ip address but its saying that requer white space is missing.Anybody have any sullution about this?

0 Likes
The opinions expressed above are the personal opinions of the authors, not of Micro Focus. By using this site, you accept the Terms of Use and Rules of Participation. Certain versions of content ("Material") accessible here may contain branding from Hewlett-Packard Company (now HP Inc.) and Hewlett Packard Enterprise Company. As of September 1, 2017, the Material is now offered by Micro Focus, a separately owned and operated company. Any reference to the HP and Hewlett Packard Enterprise/HPE marks is historical in nature, and the HP and Hewlett Packard Enterprise/HPE marks are the property of their respective owners.