Highlighted
Absent Member.. Absent Member..
Absent Member..
1997 views

My Performance Center 12 timeslots

How do you set a timeslot so a test runs automatic?

0 Likes
1 Reply
Highlighted
Honored Contributor.
Honored Contributor.

Re: My Performance Center 12 timeslots

Hi,

You need to login into your ALM and:

1-      Under Testing, select Timeslots.

2-      In the Timeslots module calendar view, click the New Timeslot button. The Timeslot Reservation dialog box opens.

3-      Define the following information:

  • Name: Enter a name for the timeslot.
  • Start Time: Enter a start time for the timeslot.
  • Test: Navigate to the test set you created above, and link the test instance to the timeslot. The number of Vusers and the hosts (Controller and load generators) defined in the test are displayed under Vusers and Requested Hosts respectively.
  • Vusers: You can reserve more Vusers in addition to those defined for the test.

4-      To set the test to start running at the beginning of the timeslot, select Autostart.

5-      (Optional) Click Add Automatch Host or Add Specific Host to reserve additional load generators for the timeslot. There must be a Controller and at least one load generator requested for the timeslot.

6-      Click Calculate Availability. ALM calculates the availability of the requested resources during the selected timeslot. The result of this calculation is displayed in the Timeslot Status tab, as well as graphically on the time chart. If the timeslot cannot be reserved, reselect your resources taking into account the reasons displayed in the Timeslot Status tab.

7-      If the requested resources are available, click Submit to save the timeslot.

 

Rodolfo Leitón

HP LR/PC Support

If you are customer you can try posting on our internal forums for more personalized support.

For LoadRunner here.
For Performance Center here.

If you find that this or any post resolves your issue, please be sure to mark it as an accepted solution.

If you found this information useful please leave a kudo.

0 Likes
The opinions expressed above are the personal opinions of the authors, not of Micro Focus. By using this site, you accept the Terms of Use and Rules of Participation. Certain versions of content ("Material") accessible here may contain branding from Hewlett-Packard Company (now HP Inc.) and Hewlett Packard Enterprise Company. As of September 1, 2017, the Material is now offered by Micro Focus, a separately owned and operated company. Any reference to the HP and Hewlett Packard Enterprise/HPE marks is historical in nature, and the HP and Hewlett Packard Enterprise/HPE marks are the property of their respective owners.