Performance Center 12.20 slow page loads
We just upgraded our ALM/Performance Center environment from 11.52 to 12.20. Now, every page that comes from Performance Center takes at least 30 seconds to load. The average is more like 60 seconds. I've tried setting up two other PC servers, but all three have the same issue.
Has anyone else experienced this?
Yes ye have encountered the same issues
We have connected slow page loads to any page that contain information about the load generator
for example if we have a scenerio that has no load generator configured it takes approx 60 seconds to load the work load profile page
with a load generator specificied to takes on average 2 minutes to load the page and at times with some projects (that have lots of scripts) takes 7 minutes to load
Thanks for bumping this Scott. I needed to update the thread with our resolution.
We opened a ticket for this with HP Support and they told us that our 30 to 60 second load times were "kind of normal". Obviously, this wasn't going to work for us, going from 11.5 where the load times were closer to 5 to 8 seconds.
The main difference in our configuration, other than the 12.20 upgrade, was that our Performance Center server was located in a different data center than our ALM server (though both were on the same domain).
We ended up building a new ALM server in the same datacenter as the PC server and this reduced our response time down to around 8 seconds, much more like 11.5. Also of note, our new ALM server was built as a HyperV virtual machine running Windows 2012, where as the previous ALM server was on hardware running Windows 2008 R2.
We are having this same issue except all our severs are in the same data center and network.
The only server that is in a different location is the Database Server itself. I am wondering whether that is the issue or not. Where was your db server located?
I also face the same issue where right after i had install logger software version 6.6.0 in Red Hat Enterprise Linux 7.3, the application seems very slow when we try to open the gui. FYI, the server itself already build follow the recommendation
Anyone can help me solve this problem? Or any advice also would be appreciated