Idea ID 2798058
Could you enhance NNM QA Ping Latency Pairs to capture Packet loss from basic ping calls along with RTT and Interface Utilization? Ping Latency Pairs is much simpler and earlier to configure than IP SLA and gives us the flexibility choose between them depending upon the use case.
Pinging 10.00.1 with 32 bytes of data:
Reply from 10.0.0.1: bytes=32 time=289ms TTL=242
Reply from 10.0.0.1: bytes=32 time=60ms TTL=242
Reply from 10.0.0.1: bytes=32 time=68ms TTL=242
Reply from 10.0.0.1: bytes=32 time=74ms TTL=242
Ping statistics for 10.0.0.1:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 60ms, Maximum = 289ms, Average = 122ms
Support suggests us to create IP SLA - ICMP Jitter service for packet loss monitoring, but if it can done with simple Ping Pair which can be easily configured in NNM between any devices(regardless of their type/model/vendor)this feature would be of great help.
You must be a registered user to add a comment. If you've already registered, sign in. Otherwise, register and sign in.