Highlighted
Respected Contributor.
Respected Contributor.
1110 views

OMI10 (10.60) integration with NNMi (10.20) fails

Jump to solution

I am trying to set up an integration between OMI(10.60) unix and NNMi (10.20) unix which fails with:

Error:
Unable to access BSM host, check the host, port and credentials for BSM

The connection between NNMi and OMI is https and have added the following certificates:

MI10 (nmsi-omi1-prod.xypoint.com) 10.60 With gw and dp on single server (linux)
/opt/HP/BSM/JRE/bin/keytool -list -keystore /opt/HP/BSM/JRE/lib/security/cacerts
cert inventory: ngwaq-nnm-prod.xypoint.com.selfsigned, Jun 30, 2017, trustedCertEntry

nnmi (10.20) linux (ngwaq-nnm-prod.xypoint.com)
/opt/OV/nonOV/jdk/hpsw/bin/keytool -list -v -keystore /var/opt/OV/shared/nnm/certificates/nnm.truststore
omi webserver ca certificate, Jun 15, 2017, trustedCertEntry,

I have verified via wget that I can hit each server from either end and have integrated an NNMi 10.00.7 doing the same setup and worked fine.  I have not found any errors when I attempt the connection so any ideas on how to debug this further would be apperciated.

 

0 Likes
1 Solution

Accepted Solutions
Highlighted
Acclaimed Contributor.. Acclaimed Contributor..
Acclaimed Contributor..

Re: OMI10 (10.60) integration with NNMi (10.20) fails

Jump to solution

Hello Randy,

 

is this a fresh installed NNMi system or was it upgraded? New NNMi uses different key store.

 

Kind regards

 

Allessandro

View solution in original post

0 Likes
5 Replies
Highlighted
Acclaimed Contributor.. Acclaimed Contributor..
Acclaimed Contributor..

Re: OMI10 (10.60) integration with NNMi (10.20) fails

Jump to solution

Hello Randy,

 

is this a fresh installed NNMi system or was it upgraded? New NNMi uses different key store.

 

Kind regards

 

Allessandro

View solution in original post

0 Likes
Highlighted
Acclaimed Contributor.. Acclaimed Contributor..
Acclaimed Contributor..

Re: OMI10 (10.60) integration with NNMi (10.20) fails

Jump to solution

Hello Randy,

 

I have found this KB article, which descibes the error and procedure for the certificates: https://softwaresupport.hpe.com/group/softwaresupport/search-result/-/facetsearch/document/KM02769260

HTH and kind regards

 

Allessandro

Highlighted
Respected Contributor.
Respected Contributor.

Re: OMI10 (10.60) integration with NNMi (10.20) fails

Jump to solution

Thanks so much for the help!  You were dead on and worked as expected once using the correct keystores.

Randy

0 Likes
Highlighted
Valued Contributor.. Valued Contributor..
Valued Contributor..

Re: OMI10 (10.60) integration with NNMi (10.20) fails

Jump to solution

Hi Allessandro, 

I am also experiencing the very similar issue, actually I have upgraded OMi from 10.01 to 10.63, since from the topo sync did not happen and I tried to re-integrate in NNMi, throwed with the same error. 

We were using port 80 in the old setup, if so, for the newer version do I need to ssl communication, can't I be success with http.? Please let me know... 

Regards,

Santhosh K

0 Likes
Highlighted
Acclaimed Contributor.. Acclaimed Contributor..
Acclaimed Contributor..

Re: OMI10 (10.60) integration with NNMi (10.20) fails

Jump to solution

Hello Santhosh,

 

this mainly depends on how the applications are configured: https only or with http.

 

https requires the exchange of certificates and this should be explained in the documentation for "classical" deployments (not CDF). For CDF you can find the instructions here:

 

https://community.softwaregrp.com/t5/Network-Management-OpenView-NNM/OMI10-10-60-integration-with-NNMi-10-20-fails/m-p/1662693

 

HTH and kind regards

 

Allessandro

0 Likes
The opinions expressed above are the personal opinions of the authors, not of Micro Focus. By using this site, you accept the Terms of Use and Rules of Participation. Certain versions of content ("Material") accessible here may contain branding from Hewlett-Packard Company (now HP Inc.) and Hewlett Packard Enterprise Company. As of September 1, 2017, the Material is now offered by Micro Focus, a separately owned and operated company. Any reference to the HP and Hewlett Packard Enterprise/HPE marks is historical in nature, and the HP and Hewlett Packard Enterprise/HPE marks are the property of their respective owners.