Highlighted
audcomp Absent Member.
Absent Member.
1306 views

6.0 Install Network Driver

My client had their 6.0 server go down and I am trying to set up a temporary server so we can restore the tape backup. I have done the 6.0SP5 install successfully and it is running, but I cannot add the network driver.

The network card is a broadcomm 57xx series and I have downloaded the required file on to a floppy. Using nwconfig, I choose to add the drivers and the path is set to the defaul of A:\, but the program returns that it could not find the driver file, and error code nwconfig-6-309.

The issue is this: I'm not sure if it can't find the file, or it can't read the floppy drive. The drive light never comes on. The floppy is detected in the BIOS. I even tried another physical drivei n case that was the problem.

Am I missing a step to mount the floppy drive?

Thanks!
Labels (2)
Tags (3)
0 Likes
1 Reply
jgray Absent Member.
Absent Member.

Re: 6.0 Install Network Driver

I would use toolbox and see if it can read the floppy. If you can, then copy the files to the drivers directory and it should work from there. Make sure you copy over both files. The .lan and the .ldi. They go together.

jgray
0 Likes
The opinions expressed above are the personal opinions of the authors, not of Micro Focus. By using this site, you accept the Terms of Use and Rules of Participation. Certain versions of content ("Material") accessible here may contain branding from Hewlett-Packard Company (now HP Inc.) and Hewlett Packard Enterprise Company. As of September 1, 2017, the Material is now offered by Micro Focus, a separately owned and operated company. Any reference to the HP and Hewlett Packard Enterprise/HPE marks is historical in nature, and the HP and Hewlett Packard Enterprise/HPE marks are the property of their respective owners.