boblmartens

Vice Admiral
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
2016-08-24
18:45
1294 views
Adding new NIC to deployed server
We have a current OES 2015 SP1 server working in one of our IP ranges and we want to add another NIC to allow authentication utilizing the OES Client. We have added the additional NIC, it has a proper IP, and we can get to iManager but cannot log in via the OES Client.
If anyone can point me to the correct documentation, that would be great. Thanks!
If anyone can point me to the correct documentation, that would be great. Thanks!
1 Reply


Knowledge Partner
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Email to a Friend
- Report Inappropriate Content
2016-08-24
19:03
You probably need to modify the (by default)
/etc/opt/novell/eDirectory/conf/nds.conf file to have another value for
the n4u.server.interfaces value since by default it probably lists only
the original IP address, so ndsd will only listen (for NCP) on that one IP
address. Using 'ndsconfig set' you can modify this parameter easily.
--
Good luck.
If you find this post helpful and are logged into the web interface,
show your appreciation and click on the star below...
/etc/opt/novell/eDirectory/conf/nds.conf file to have another value for
the n4u.server.interfaces value since by default it probably lists only
the original IP address, so ndsd will only listen (for NCP) on that one IP
address. Using 'ndsconfig set' you can modify this parameter easily.
--
Good luck.
If you find this post helpful and are logged into the web interface,
show your appreciation and click on the star below...