Anonymous_User Absent Member.
Absent Member.
2093 views

Attempted access of CIFS share causes intruder lockout

Another newbie to NFA, so bear with me.

We have two NW6.0 sp5 servers. We also have a new Windows 2003 AD
domain. I'd like to make a couple of shares available on one of my two
NW boxes.

I installed NFA for windows, along w/ NMAS, on one of my NW servers
using the 6.0 sp5 overlay CD. My first install attempt did not include
NMAS and the installer barked at me, so I canceled out and started over.

I have not restarted the server since the install of NFA.

Since I'm just in the testing stage right now, I've set up the
authentication to be local. I gave my user object a simple password.
We only need CIFS for a few users that will be accessing the network
through our VPN, so I don't really want to setup the authentication to
be Domain. I'll do whatever works best though !

When I try to access a CIFS share I get a pop-up box, so I try to log
in. Before that pop-up box, I see many "Intruder Lockout" messages for
my user object on the NW server.

This happens every time.

Something else that happens every time is that CIFSSTOP yells that it
can not unload CIFS.NLM b/c NFAP4NRM.NLM is running. I have to unload
it by hand, then run CIFSSTOP again to get CIFS.NLM unloaded.

Of course now, I'm in a worse position b/c my server console is locked
up from my most recent attempt to CIFSSTOP. I had loaded NMASMON b/f
and failed to unload it b/f doing the CIFSSTOP, so I guess that could be
the problem.

Most recent message on the console is :

ExitProcedure: WTD Count (B) is non-zero!!

Should I depend on NFA for anything ? I'm sure having a lot of trouble
getting it to work.

TIA !

KH
Labels (1)
0 Likes
19 Replies
Anonymous_User Absent Member.
Absent Member.

Re: Attempted access of CIFS share causes intruder lockout

Update ( & forgive me if this is too much info )

After rebooting my server, I changed the authentication to Domain, but
did not import any users, b/c the AD users are exports from my current
NW servers, so they're already in both trees.

I did a cifsstop ( still have to unload nfap4nrm b/f I could unload
cifs.nlm ), and a cifsstrt.

I loaded nmasmon and here's the initial results :

NMAS Enterprise Edition
0: Screen and file output started at Wed Jun 21 23:35:00 2006

2: Create NMAS Session
2: RemoteCheckIfLocalUser checking Hunter.CHH.Rho.
2: ERROR: -601 RemoteCheckIfLocalUser: DDCResolveName
2: ERROR: -601 RemoteCheckIfLocalUser failed.
2: NCPCheckIfLocalUser failed -601
2: Client Session Destroy Request
2: Destroy NMAS Session
2: Aborted Session Destroyed (with MAF)
3: Create NMAS Session
3: RemoteCheckIfLocalUser checking Hunter.USERS.CHH.Rho.
3: RemoteCheckIfLocalUser is a local user.
3: Server thread started
3: NMAS_CanDo StartClientSession 0
3: >>ClientPut: message size=8 queue Size 0
3: >>ClientPut: message size=7 queue Size 8
3: NMAS_CanDo sendMessage 0
3: <<ClientGet: message size=8 queue Size 0
3: >>ServerGet: message size=8 queue size 0
3: >>ServerGet: message size=7 queue size 7
3: CanDo
3: Sequence Selected == "LSMCIFS"
3: Login Method 0x0000000D
3: MAF_Begin LSM 0x0000000D
3: <<ServerPut: message size=8 queue size 0
3: <<ServerPut: message size=5 queue size 8
3: <<ClientGet: message size=5 queue Size 0
3: NMAS_CanDo sendMessage 0
3: NMAS_CanDo disassembleDoPacket 0
3: MAF_Begin LCM 0x0000000D
3: MAF_Write LCM 0x0000000D
3: >>ClientPut: message size=8 queue Size 0
3: >>ClientPut: message size=2449 queue Size 8
3: MAF_Read LCM 0x0000000D
3: <<ClientGet: message size=8 queue Size 0
3: MAF_Read LSM 0x0000000D
3: >>ServerGet: message size=8 queue size 2457
3: >>ServerGet: message size=2449 queue size 2449
3: MAF_Write LSM 0x0000000D
3: <<ServerPut: message size=8 queue size 0
3: <<ServerPut: message size=2449 queue size 8
3: MAF_Read LSM 0x0000000D
3: >>ServerGet: message size=8 queue size 0
3: <<ClientGet: message size=2449 queue Size 0
3: MAF_Write LCM 0x0000000D
3: >>ClientPut: message size=8 queue Size 0
3: >>ClientPut: message size=2449 queue Size 8
3: MAF_Read LCM 0x0000000D
3: <<ClientGet: message size=8 queue Size 0
3: >>ServerGet: message size=2449 queue size 0
3: MAF_Write LSM 0x0000000D
3: <<ServerPut: message size=8 queue size 0
3: <<ServerPut: message size=2449 queue size 8
3: MAF_End LSM 0x0000000D
3: LSM 0x0000000D successful
3: >>ServerGet: message size=8 queue size 0
3: <<ClientGet: message size=2449 queue Size 0
3: MAF_End LCM 0x0000000D
3: >>ClientPut: message size=8 queue Size 0
3: <<ClientGet: message size=8 queue Size 0
3: WhatNext
3: Successful login
3: <<ServerPut: message size=8 queue size 0
3: <<ServerPut: message size=4 queue size 8
3: <<ClientGet: message size=4 queue Size 0
3: >>ClientPut: message size=8 queue Size 0
3: <<ClientGet: message size=8 queue Size 0
3: >>ServerGet: message size=8 queue size 8
3: <<ServerPut: message size=8 queue size 0
3: Server thread exited
3: Client Session Destroy Request
3: Local Session Cleared (Not Destroyed)
4: Create NMAS Session
4: RemoteCheckIfLocalUser checking Hunter.CHH.Rho.
4: ERROR: -601 RemoteCheckIfLocalUser: DDCResolveName
4: ERROR: -601 RemoteCheckIfLocalUser failed.
4: NCPCheckIfLocalUser failed -601
4: Client Session Destroy Request
4: Destroy NMAS Session
4: Aborted Session Destroyed (with MAF)
5: Create NMAS Session
5: RemoteCheckIfLocalUser checking Hunter.USERS.CHH.Rho.
5: RemoteCheckIfLocalUser is a local user.
5: Server thread started
5: NMAS_CanDo StartClientSession 0
5: >>ClientPut: message size=8 queue Size 0
5: >>ClientPut: message size=7 queue Size 8
5: NMAS_CanDo sendMessage 0
5: <<ClientGet: message size=8 queue Size 0
5: >>ServerGet: message size=8 queue size 0
5: >>ServerGet: message size=7 queue size 7
5: CanDo
5: Sequence Selected == "LSMCIFS"
5: Login Method 0x0000000D
5: MAF_Begin LSM 0x0000000D
5: <<ServerPut: message size=8 queue size 0
5: <<ServerPut: message size=5 queue size 8
5: MAF_Read LSM 0x0000000D
5: >>ServerGet: message size=8 queue size 0
5: <<ClientGet: message size=5 queue Size 0
5: NMAS_CanDo sendMessage 0
5: NMAS_CanDo disassembleDoPacket 0
5: MAF_Begin LCM 0x0000000D
5: MAF_Write LCM 0x0000000D
5: >>ClientPut: message size=8 queue Size 0
5: >>ClientPut: message size=2449 queue Size 8
5: MAF_Read LCM 0x0000000D
5: <<ClientGet: message size=8 queue Size 0
5: >>ServerGet: message size=2449 queue size 0
5: MAF_Write LSM 0x0000000D
5: <<ServerPut: message size=8 queue size 0
5: <<ServerPut: message size=2449 queue size 8
5: MAF_Read LSM 0x0000000D
5: >>ServerGet: message size=8 queue size 0
5: <<ClientGet: message size=2449 queue Size 0
5: MAF_Write LCM 0x0000000D
5: >>ClientPut: message size=8 queue Size 0
5: >>ClientPut: message size=2449 queue Size 8
5: MAF_Read LCM 0x0000000D
5: <<ClientGet: message size=8 queue Size 0
5: >>ServerGet: message size=2449 queue size 0
5: MAF_Write LSM 0x0000000D
5: <<ServerPut: message size=8 queue size 0
5: <<ServerPut: message size=2449 queue size 8
5: MAF_End LSM 0x0000000D
5: LSM 0x0000000D failed
5: ERROR: -1642 Login Method
5: ERROR: -1642 NMAS Manager
5: <<ClientGet: message size=2449 queue Size 0
5: MAF_End LCM 0x0000000D
5: >>ClientPut: message size=8 queue Size 0
5: <<ClientGet: message size=8 queue Size 0
5: <<ServerPut: message size=8 queue size 0
5: <<ServerPut: message size=4 queue size 8
5: >>ServerGet: message size=8 queue size 8
5: >>ServerGet: message size=8 queue size 0
5: <<ClientGet: message size=4 queue Size 0
5: >>ClientPut: message size=8 queue Size 0
5: <<ClientGet: message size=8 queue Size 0
5: <<ServerPut: message size=8 queue size 0
5: Server thread exited
5: Client Session Destroy Request
5: Local Session Cleared (Not Destroyed)
6: Create NMAS Session
6: RemoteCheckIfLocalUser checking Hunter.CHH.Rho.
6: ERROR: -601 RemoteCheckIfLocalUser: DDCResolveName
6: ERROR: -601 RemoteCheckIfLocalUser failed.
6: NCPCheckIfLocalUser failed -601
6: Client Session Destroy Request
6: Destroy NMAS Session
6: Aborted Session Destroyed (with MAF)
7: Create NMAS Session
7: RemoteCheckIfLocalUser checking Hunter.USERS.CHH.Rho.
7: RemoteCheckIfLocalUser is a local user.
7: Server thread started
7: NMAS_CanDo StartClientSession 0
7: >>ServerGet: message size=8 queue size 0
7: >>ClientPut: message size=8 queue Size 0
7: >>ClientPut: message size=7 queue Size 8
7: NMAS_CanDo sendMessage 0
7: <<ClientGet: message size=8 queue Size 0
7: >>ServerGet: message size=7 queue size 0
7: CanDo
7: Sequence Selected == "LSMCIFS"
7: Login Method 0x0000000D
7: MAF_Begin LSM 0x0000000D
7: <<ServerPut: message size=8 queue size 0
7: <<ServerPut: message size=5 queue size 8
7: MAF_Read LSM 0x0000000D
7: <<ClientGet: message size=5 queue Size 0
7: NMAS_CanDo sendMessage 0
7: NMAS_CanDo disassembleDoPacket 0
7: MAF_Begin LCM 0x0000000D
7: MAF_Write LCM 0x0000000D
7: >>ClientPut: message size=8 queue Size 0
7: >>ClientPut: message size=2449 queue Size 8
7: MAF_Read LCM 0x0000000D
7: <<ClientGet: message size=8 queue Size 0
7: >>ServerGet: message size=8 queue size 0
7: >>ServerGet: message size=2449 queue size 2449
7: MAF_Write LSM 0x0000000D
7: <<ServerPut: message size=8 queue size 0
7: <<ServerPut: message size=2449 queue size 8
7: MAF_Read LSM 0x0000000D
7: >>ServerGet: message size=8 queue size 0
7: <<ClientGet: message size=2449 queue Size 0
7: MAF_Write LCM 0x0000000D
7: >>ClientPut: message size=8 queue Size 0
7: >>ClientPut: message size=2449 queue Size 8
7: MAF_Read LCM 0x0000000D
7: <<ClientGet: message size=8 queue Size 0
7: >>ServerGet: message size=2449 queue size 0
7: MAF_Write LSM 0x0000000D
7: <<ServerPut: message size=8 queue size 0
7: <<ServerPut: message size=2449 queue size 8
7: MAF_End LSM 0x0000000D
7: LSM 0x0000000D failed
7: ERROR: -1642 Login Method
7: ERROR: -1642 NMAS Manager
7: <<ClientGet: message size=2449 queue Size 0
7: MAF_End LCM 0x0000000D
7: >>ClientPut: message size=8 queue Size 0
7: <<ClientGet: message size=8 queue Size 0
7: <<ServerPut: message size=8 queue size 0
7: <<ServerPut: message size=4 queue size 8
7: >>ServerGet: message size=8 queue size 8
7: >>ServerGet: message size=8 queue size 0
7: <<ClientGet: message size=4 queue Size 0
7: >>ClientPut: message size=8 queue Size 0
7: <<ClientGet: message size=8 queue Size 0
7: <<ServerPut: message size=8 queue size 0
7: Server thread exited
7: Client Session Destroy Request
7: Local Session Cleared (Not Destroyed)
8: Create NMAS Session
8: RemoteCheckIfLocalUser checking Hunter.CHH.Rho.
8: ERROR: -601 RemoteCheckIfLocalUser: DDCResolveName
8: ERROR: -601 RemoteCheckIfLocalUser failed.
8: NCPCheckIfLocalUser failed -601
8: Client Session Destroy Request
8: Destroy NMAS Session
8: Aborted Session Destroyed (with MAF)
9: Create NMAS Session
9: RemoteCheckIfLocalUser checking Hunter.USERS.CHH.Rho.
9: RemoteCheckIfLocalUser is a local user.
9: Server thread started
9: NMAS_CanDo StartClientSession 0
9: >>ClientPut: message size=8 queue Size 0
9: >>ClientPut: message size=7 queue Size 8
9: NMAS_CanDo sendMessage 0
9: <<ClientGet: message size=8 queue Size 0
9: >>ServerGet: message size=8 queue size 0
9: >>ServerGet: message size=7 queue size 7
9: CanDo
9: Sequence Selected == "LSMCIFS"
9: Login Method 0x0000000D
9: MAF_Begin LSM 0x0000000D
9: <<ServerPut: message size=8 queue size 0
9: <<ServerPut: message size=5 queue size 8
9: MAF_Read LSM 0x0000000D
9: >>ServerGet: message size=8 queue size 0
9: <<ClientGet: message size=5 queue Size 0
9: NMAS_CanDo sendMessage 0
9: NMAS_CanDo disassembleDoPacket 0
9: MAF_Begin LCM 0x0000000D
9: MAF_Write LCM 0x0000000D
9: >>ClientPut: message size=8 queue Size 0
9: >>ClientPut: message size=2449 queue Size 8
9: MAF_Read LCM 0x0000000D
9: <<ClientGet: message size=8 queue Size 0
9: >>ServerGet: message size=2449 queue size 0
9: MAF_Write LSM 0x0000000D
9: <<ServerPut: message size=8 queue size 0
9: <<ServerPut: message size=2449 queue size 8
9: MAF_Read LSM 0x0000000D
9: >>ServerGet: message size=8 queue size 0
9: <<ClientGet: message size=2449 queue Size 0
9: MAF_Write LCM 0x0000000D
9: >>ClientPut: message size=8 queue Size 0
9: >>ClientPut: message size=2449 queue Size 8
9: >>ServerGet: message size=2449 queue size 0
9: MAF_Write LSM 0x0000000D
9: <<ServerPut: message size=8 queue size 0
9: <<ServerPut: message size=2449 queue size 8
9: MAF_End LSM 0x0000000D
9: LSM 0x0000000D failed
9: ERROR: -1642 Login Method
9: ERROR: -1642 NMAS Manager
9: MAF_Read LCM 0x0000000D
9: <<ClientGet: message size=8 queue Size 2457
9: <<ClientGet: message size=2449 queue Size 2449
9: MAF_End LCM 0x0000000D
9: >>ClientPut: message size=8 queue Size 0
9: <<ClientGet: message size=8 queue Size 0
9: <<ServerPut: message size=8 queue size 0
9: <<ServerPut: message size=4 queue size 8
9: >>ServerGet: message size=8 queue size 8
9: >>ServerGet: message size=8 queue size 0
9: <<ClientGet: message size=4 queue Size 0
9: >>ClientPut: message size=8 queue Size 0
9: <<ClientGet: message size=8 queue Size 0
9: <<ServerPut: message size=8 queue size 0
9: Server thread exited
9: Client Session Destroy Request
9: Local Session Cleared (Not Destroyed)
10: Create NMAS Session
10: RemoteCheckIfLocalUser checking hunter.CHH.Rho.
10: ERROR: -601 RemoteCheckIfLocalUser: DDCResolveName
10: ERROR: -601 RemoteCheckIfLocalUser failed.
10: NCPCheckIfLocalUser failed -601
10: Client Session Destroy Request
10: Destroy NMAS Session
10: Aborted Session Destroyed (with MAF)
11: Create NMAS Session
11: RemoteCheckIfLocalUser checking hunter.USERS.CHH.Rho.
11: RemoteCheckIfLocalUser is a local user.
11: Server thread started
11: NMAS_CanDo StartClientSession 0
11: >>ClientPut: message size=8 queue Size 0
11: >>ClientPut: message size=7 queue Size 8
11: NMAS_CanDo sendMessage 0
11: <<ClientGet: message size=8 queue Size 0
11: >>ServerGet: message size=8 queue size 0
11: >>ServerGet: message size=7 queue size 7
11: CanDo
11: Sequence Selected == "LSMCIFS"
11: Login Method 0x0000000D
11: MAF_Begin LSM 0x0000000D
11: <<ServerPut: message size=8 queue size 0
11: <<ServerPut: message size=5 queue size 8
11: MAF_Read LSM 0x0000000D
11: >>ServerGet: message size=8 queue size 0
11: <<ClientGet: message size=5 queue Size 0
11: NMAS_CanDo sendMessage 0
11: NMAS_CanDo disassembleDoPacket 0
11: MAF_Begin LCM 0x0000000D
11: MAF_Write LCM 0x0000000D
11: >>ClientPut: message size=8 queue Size 0
11: >>ClientPut: message size=2449 queue Size 8
11: >>ServerGet: message size=2449 queue size 0
11: MAF_Write LSM 0x0000000D
11: <<ServerPut: message size=8 queue size 0
11: <<ServerPut: message size=2449 queue size 8
11: MAF_Read LSM 0x0000000D
11: >>ServerGet: message size=8 queue size 0
11: MAF_Read LCM 0x0000000D
11: <<ClientGet: message size=8 queue Size 2457
11: <<ClientGet: message size=2449 queue Size 2449
11: MAF_Write LCM 0x0000000D
11: >>ClientPut: message size=8 queue Size 0
11: >>ClientPut: message size=2449 queue Size 8
11: MAF_Read LCM 0x0000000D
11: <<ClientGet: message size=8 queue Size 0
11: >>ServerGet: message size=2449 queue size 0
11: MAF_Write LSM 0x0000000D
11: <<ServerPut: message size=8 queue size 0
11: <<ServerPut: message size=2449 queue size 8
11: MAF_End LSM 0x0000000D
11: LSM 0x0000000D failed
11: ERROR: -1642 Login Method
11: ERROR: -1642 NMAS Manager
11: <<ClientGet: message size=2449 queue Size 0
11: MAF_End LCM 0x0000000D
11: >>ClientPut: message size=8 queue Size 0
11: <<ClientGet: message size=8 queue Size 0
11: <<ServerPut: message size=8 queue size 0
11: <<ServerPut: message size=4 queue size 8
11: >>ServerGet: message size=8 queue size 8
11: >>ServerGet: message size=8 queue size 0
11: <<ClientGet: message size=4 queue Size 0
11: >>ClientPut: message size=8 queue Size 0
11: <<ClientGet: message size=8 queue Size 0
11: <<ServerPut: message size=8 queue size 0
11: Server thread exited
11: Client Session Destroy Request
11: Local Session Cleared (Not Destroyed)
12: Create NMAS Session
12: RemoteCheckIfLocalUser checking Hunter.CHH.Rho.
12: ERROR: -601 RemoteCheckIfLocalUser: DDCResolveName
12: ERROR: -601 RemoteCheckIfLocalUser failed.
12: NCPCheckIfLocalUser failed -601
12: Client Session Destroy Request
12: Destroy NMAS Session
12: Aborted Session Destroyed (with MAF)
13: Create NMAS Session
13: RemoteCheckIfLocalUser checking Hunter.USERS.CHH.Rho.
13: RemoteCheckIfLocalUser is a local user.
13: Server thread started
13: NMAS_CanDo StartClientSession 0
13: >>ClientPut: message size=8 queue Size 0
13: >>ClientPut: message size=7 queue Size 8
13: NMAS_CanDo sendMessage 0
13: <<ClientGet: message size=8 queue Size 0
13: >>ServerGet: message size=8 queue size 0
13: >>ServerGet: message size=7 queue size 7
13: CanDo
13: Sequence Selected == "LSMCIFS"
13: Login Method 0x0000000D
13: MAF_Begin LSM 0x0000000D
13: <<ServerPut: message size=8 queue size 0
13: <<ServerPut: message size=5 queue size 8
13: MAF_Read LSM 0x0000000D
13: >>ServerGet: message size=8 queue size 0
13: <<ClientGet: message size=5 queue Size 0
13: NMAS_CanDo sendMessage 0
13: NMAS_CanDo disassembleDoPacket 0
13: MAF_Begin LCM 0x0000000D
13: MAF_Write LCM 0x0000000D
13: >>ClientPut: message size=8 queue Size 0
13: >>ClientPut: message size=2449 queue Size 8
13: >>ServerGet: message size=2449 queue size 0
13: MAF_Write LSM 0x0000000D
13: <<ServerPut: message size=8 queue size 0
13: <<ServerPut: message size=2449 queue size 8
13: MAF_Read LSM 0x0000000D
13: >>ServerGet: message size=8 queue size 0
13: MAF_Read LCM 0x0000000D
13: <<ClientGet: message size=8 queue Size 2457
13: <<ClientGet: message size=2449 queue Size 2449
13: MAF_Write LCM 0x0000000D
13: >>ClientPut: message size=8 queue Size 0
13: >>ClientPut: message size=2449 queue Size 8
13: MAF_Read LCM 0x0000000D
13: <<ClientGet: message size=8 queue Size 0
13: >>ServerGet: message size=2449 queue size 0
13: MAF_Write LSM 0x0000000D
13: <<ServerPut: message size=8 queue size 0
13: <<ServerPut: message size=2449 queue size 8
13: MAF_End LSM 0x0000000D
13: LSM 0x0000000D failed
13: ERROR: -1642 Login Method
13: ERROR: -1642 NMAS Manager
13: <<ClientGet: message size=2449 queue Size 0
13: MAF_End LCM 0x0000000D
13: >>ClientPut: message size=8 queue Size 0
13: <<ClientGet: message size=8 queue Size 0
13: <<ServerPut: message size=8 queue size 0
13: <<ServerPut: message size=4 queue size 8
13: >>ServerGet: message size=8 queue size 8
13: >>ServerGet: message size=8 queue size 0
13: <<ClientGet: message size=4 queue Size 0
13: >>ClientPut: message size=8 queue Size 0
13: <<ClientGet: message size=8 queue Size 0
13: <<ServerPut: message size=8 queue size 0
13: Server thread exited
13: Client Session Destroy Request
13: Local Session Cleared (Not Destroyed)

*****

User object hunter.users.chh.rho does exist. I took out the CHH.Rho
context from cifsctxs.cfg and checked my login methods according to TID
(10097527). lsmcifs existed and was on the right hand side.

stopped and restarted cifs & I could see the initial directory listing
of one of my shares, but I could not access subdirectories - ONCE.
After the initial minor success, it failed again. Below is the NMAS log
from those attempts. I was locked out again in NW in the end.

NMAS Enterprise Edition
0: Screen and file output started at Thu Jun 22 00:00:27 2006

28: Create NMAS Session
28: RemoteCheckIfLocalUser checking Hunter.USERS.CHH.Rho.
28: RemoteCheckIfLocalUser is a local user.
28: Server thread started
28: NMAS_CanDo StartClientSession 0
28: >>ClientPut: message size=8 queue Size 0
28: >>ClientPut: message size=7 queue Size 8
28: NMAS_CanDo sendMessage 0
28: <<ClientGet: message size=8 queue Size 0
28: >>ServerGet: message size=8 queue size 0
28: >>ServerGet: message size=7 queue size 7
28: CanDo
28: Sequence Selected == "LSMCIFS"
28: Login Method 0x0000000D
28: MAF_Begin LSM 0x0000000D
28: <<ServerPut: message size=8 queue size 0
28: <<ServerPut: message size=5 queue size 8
28: MAF_Read LSM 0x0000000D
28: >>ServerGet: message size=8 queue size 0
28: <<ClientGet: message size=5 queue Size 0
28: NMAS_CanDo sendMessage 0
28: NMAS_CanDo disassembleDoPacket 0
28: MAF_Begin LCM 0x0000000D
28: MAF_Write LCM 0x0000000D
28: >>ClientPut: message size=8 queue Size 0
28: >>ClientPut: message size=2449 queue Size 8
28: MAF_Read LCM 0x0000000D
28: <<ClientGet: message size=8 queue Size 0
28: >>ServerGet: message size=2449 queue size 0
28: MAF_Write LSM 0x0000000D
28: <<ServerPut: message size=8 queue size 0
28: <<ServerPut: message size=2449 queue size 8
28: MAF_Read LSM 0x0000000D
28: >>ServerGet: message size=8 queue size 0
28: <<ClientGet: message size=2449 queue Size 0
28: MAF_Write LCM 0x0000000D
28: >>ClientPut: message size=8 queue Size 0
28: >>ClientPut: message size=2449 queue Size 8
28: MAF_Read LCM 0x0000000D
28: <<ClientGet: message size=8 queue Size 0
28: >>ServerGet: message size=2449 queue size 0
28: MAF_Write LSM 0x0000000D
28: <<ServerPut: message size=8 queue size 0
28: <<ServerPut: message size=2449 queue size 8
28: MAF_End LSM 0x0000000D
28: LSM 0x0000000D failed
28: ERROR: -1642 Login Method
28: ERROR: -1642 NMAS Manager
28: <<ClientGet: message size=2449 queue Size 0
28: MAF_End LCM 0x0000000D
28: >>ClientPut: message size=8 queue Size 0
28: <<ClientGet: message size=8 queue Size 0
28: <<ServerPut: message size=8 queue size 0
28: <<ServerPut: message size=4 queue size 8
28: >>ServerGet: message size=8 queue size 8
28: >>ServerGet: message size=8 queue size 0
28: <<ClientGet: message size=4 queue Size 0
28: >>ClientPut: message size=8 queue Size 0
28: <<ClientGet: message size=8 queue Size 0
28: <<ServerPut: message size=8 queue size 0
28: Server thread exited
28: Client Session Destroy Request
28: Local Session Cleared (Not Destroyed)
29: Create NMAS Session
29: RemoteCheckIfLocalUser checking Hunter.USERS.CHH.Rho.
29: RemoteCheckIfLocalUser is a local user.
29: Server thread started
29: NMAS_CanDo StartClientSession 0
29: >>ClientPut: message size=8 queue Size 0
29: >>ClientPut: message size=7 queue Size 8
29: NMAS_CanDo sendMessage 0
29: <<ClientGet: message size=8 queue Size 0
29: >>ServerGet: message size=8 queue size 0
29: >>ServerGet: message size=7 queue size 7
29: CanDo
29: Sequence Selected == "LSMCIFS"
29: Login Method 0x0000000D
29: MAF_Begin LSM 0x0000000D
29: <<ServerPut: message size=8 queue size 0
29: <<ServerPut: message size=5 queue size 8
29: MAF_Read LSM 0x0000000D
29: >>ServerGet: message size=8 queue size 0
29: <<ClientGet: message size=5 queue Size 0
29: NMAS_CanDo sendMessage 0
29: NMAS_CanDo disassembleDoPacket 0
29: MAF_Begin LCM 0x0000000D
29: MAF_Write LCM 0x0000000D
29: >>ClientPut: message size=8 queue Size 0
29: >>ClientPut: message size=2449 queue Size 8
29: MAF_Read LCM 0x0000000D
29: <<ClientGet: message size=8 queue Size 0
29: >>ServerGet: message size=2449 queue size 0
29: MAF_Write LSM 0x0000000D
29: <<ServerPut: message size=8 queue size 0
29: <<ServerPut: message size=2449 queue size 8
29: MAF_Read LSM 0x0000000D
29: >>ServerGet: message size=8 queue size 0
29: <<ClientGet: message size=2449 queue Size 0
29: MAF_Write LCM 0x0000000D
29: >>ClientPut: message size=8 queue Size 0
29: >>ClientPut: message size=2449 queue Size 8
29: MAF_Read LCM 0x0000000D
29: <<ClientGet: message size=8 queue Size 0
29: >>ServerGet: message size=2449 queue size 0
29: MAF_Write LSM 0x0000000D
29: <<ServerPut: message size=8 queue size 0
29: <<ServerPut: message size=2449 queue size 8
29: MAF_End LSM 0x0000000D
29: LSM 0x0000000D failed
29: ERROR: -1642 Login Method
29: ERROR: -1642 NMAS Manager
29: <<ClientGet: message size=2449 queue Size 0
29: MAF_End LCM 0x0000000D
29: >>ClientPut: message size=8 queue Size 0
29: <<ClientGet: message size=8 queue Size 0
29: <<ServerPut: message size=8 queue size 0
29: <<ServerPut: message size=4 queue size 8
29: >>ServerGet: message size=8 queue size 8
29: >>ServerGet: message size=8 queue size 0
29: <<ClientGet: message size=4 queue Size 0
29: >>ClientPut: message size=8 queue Size 0
29: <<ClientGet: message size=8 queue Size 0
29: <<ServerPut: message size=8 queue size 0
29: Server thread exited
29: Client Session Destroy Request
29: Local Session Cleared (Not Destroyed)
30: Create NMAS Session
30: RemoteCheckIfLocalUser checking hunter.USERS.CHH.Rho.
30: RemoteCheckIfLocalUser is a local user.
30: Server thread started
30: NMAS_CanDo StartClientSession 0
30: >>ClientPut: message size=8 queue Size 0
30: >>ClientPut: message size=7 queue Size 8
30: NMAS_CanDo sendMessage 0
30: <<ClientGet: message size=8 queue Size 0
30: >>ServerGet: message size=8 queue size 0
30: >>ServerGet: message size=7 queue size 7
30: CanDo
30: Sequence Selected == "LSMCIFS"
30: Login Method 0x0000000D
30: MAF_Begin LSM 0x0000000D
30: <<ServerPut: message size=8 queue size 0
30: <<ServerPut: message size=5 queue size 8
30: MAF_Read LSM 0x0000000D
30: <<ClientGet: message size=5 queue Size 0
30: NMAS_CanDo sendMessage 0
30: NMAS_CanDo disassembleDoPacket 0
30: MAF_Begin LCM 0x0000000D
30: MAF_Write LCM 0x0000000D
30: >>ClientPut: message size=8 queue Size 0
30: >>ClientPut: message size=2449 queue Size 8
30: MAF_Read LCM 0x0000000D
30: <<ClientGet: message size=8 queue Size 0
30: >>ServerGet: message size=8 queue size 0
30: >>ServerGet: message size=2449 queue size 2449
30: MAF_Write LSM 0x0000000D
30: <<ServerPut: message size=8 queue size 0
30: <<ServerPut: message size=2449 queue size 8
30: MAF_Read LSM 0x0000000D
30: >>ServerGet: message size=8 queue size 0
30: <<ClientGet: message size=2449 queue Size 0
30: MAF_Write LCM 0x0000000D
30: >>ClientPut: message size=8 queue Size 0
30: >>ClientPut: message size=2449 queue Size 8
30: MAF_Read LCM 0x0000000D
30: <<ClientGet: message size=8 queue Size 0
30: >>ServerGet: message size=2449 queue size 0
30: MAF_Write LSM 0x0000000D
30: <<ServerPut: message size=8 queue size 0
30: <<ServerPut: message size=2449 queue size 8
30: MAF_End LSM 0x0000000D
30: LSM 0x0000000D failed
30: ERROR: -1642 Login Method
30: ERROR: -1642 NMAS Manager
30: <<ClientGet: message size=2449 queue Size 0
30: MAF_End LCM 0x0000000D
30: >>ClientPut: message size=8 queue Size 0
30: <<ClientGet: message size=8 queue Size 0
30: <<ServerPut: message size=8 queue size 0
30: <<ServerPut: message size=4 queue size 8
30: >>ServerGet: message size=8 queue size 8
30: >>ServerGet: message size=8 queue size 0
30: <<ClientGet: message size=4 queue Size 0
30: >>ClientPut: message size=8 queue Size 0
30: <<ClientGet: message size=8 queue Size 0
30: <<ServerPut: message size=8 queue size 0
30: Server thread exited
30: Client Session Destroy Request
30: Local Session Cleared (Not Destroyed)
31: Create NMAS Session
31: RemoteCheckIfLocalUser checking hunter.USERS.CHH.Rho.
31: RemoteCheckIfLocalUser is a local user.
31: Server thread started
31: NMAS_CanDo StartClientSession 0
31: >>ClientPut: message size=8 queue Size 0
31: >>ClientPut: message size=7 queue Size 8
31: NMAS_CanDo sendMessage 0
31: <<ClientGet: message size=8 queue Size 0
31: >>ServerGet: message size=8 queue size 0
31: >>ServerGet: message size=7 queue size 7
31: CanDo
31: ERROR: -1668 Login Restrictions
31: ERROR: -1668 NMAS Manager
31: <<ServerPut: message size=8 queue size 0
31: <<ServerPut: message size=4 queue size 8
31: >>ServerGet: message size=8 queue size 0
31: <<ClientGet: message size=4 queue Size 0
31: NMAS_CanDo sendMessage 0
31: Client Session Destroy Request
31: Local Session Cleared (Not Destroyed)
31: Server thread exited
32: Create NMAS Session
32: RemoteCheckIfLocalUser checking hunter.USERS.CHH.Rho.
32: RemoteCheckIfLocalUser is a local user.
32: Server thread started
32: NMAS_CanDo StartClientSession 0
32: >>ClientPut: message size=8 queue Size 0
32: >>ClientPut: message size=7 queue Size 8
32: NMAS_CanDo sendMessage 0
32: <<ClientGet: message size=8 queue Size 0
32: >>ServerGet: message size=8 queue size 0
32: >>ServerGet: message size=7 queue size 7
32: CanDo
32: ERROR: -1668 Login Restrictions
32: ERROR: -1668 NMAS Manager
32: <<ServerPut: message size=8 queue size 0
32: <<ServerPut: message size=4 queue size 8
32: >>ServerGet: message size=8 queue size 0
32: <<ClientGet: message size=4 queue Size 0
32: NMAS_CanDo sendMessage 0
32: Client Session Destroy Request
32: Local Session Cleared (Not Destroyed)
32: Server thread exited
33: Create NMAS Session
33: RemoteCheckIfLocalUser checking Hunter.USERS.CHH.Rho.
33: RemoteCheckIfLocalUser is a local user.
33: Server thread started
33: NMAS_CanDo StartClientSession 0
33: >>ClientPut: message size=8 queue Size 0
33: >>ClientPut: message size=7 queue Size 8
33: NMAS_CanDo sendMessage 0
33: <<ClientGet: message size=8 queue Size 0
33: >>ServerGet: message size=8 queue size 0
33: >>ServerGet: message size=7 queue size 7
33: CanDo
33: ERROR: -1668 Login Restrictions
33: ERROR: -1668 NMAS Manager
33: <<ServerPut: message size=8 queue size 0
33: <<ServerPut: message size=4 queue size 8
33: >>ServerGet: message size=8 queue size 0
33: <<ClientGet: message size=4 queue Size 0
33: NMAS_CanDo sendMessage 0
33: Client Session Destroy Request
33: Local Session Cleared (Not Destroyed)
33: Server thread exited
34: Create NMAS Session
34: RemoteCheckIfLocalUser checking Hunter.USERS.CHH.Rho.
34: RemoteCheckIfLocalUser is a local user.
34: Server thread started
34: NMAS_CanDo StartClientSession 0
34: >>ClientPut: message size=8 queue Size 0
34: >>ClientPut: message size=7 queue Size 8
34: NMAS_CanDo sendMessage 0
34: <<ClientGet: message size=8 queue Size 0
34: >>ServerGet: message size=8 queue size 0
34: >>ServerGet: message size=7 queue size 7
34: CanDo
34: ERROR: -1668 Login Restrictions
34: ERROR: -1668 NMAS Manager
34: <<ServerPut: message size=8 queue size 0
34: <<ServerPut: message size=4 queue size 8
34: >>ServerGet: message size=8 queue size 0
34: <<ClientGet: message size=4 queue Size 0
34: NMAS_CanDo sendMessage 0
34: Client Session Destroy Request
34: Local Session Cleared (Not Destroyed)
34: Server thread exited
35: Create NMAS Session
35: RemoteCheckIfLocalUser checking hunter.USERS.CHH.Rho.
35: RemoteCheckIfLocalUser is a local user.
35: Server thread started
35: NMAS_CanDo StartClientSession 0
35: >>ClientPut: message size=8 queue Size 0
35: >>ServerGet: message size=8 queue size 0
35: >>ServerGet: message size=7 queue size 0
35: >>ClientPut: message size=7 queue Size 8
35: NMAS_CanDo sendMessage 0
35: <<ClientGet: message size=8 queue Size 0
35: CanDo
35: ERROR: -1668 Login Restrictions
35: ERROR: -1668 NMAS Manager
35: <<ServerPut: message size=8 queue size 0
35: <<ServerPut: message size=4 queue size 8
35: >>ServerGet: message size=8 queue size 0
35: <<ClientGet: message size=4 queue Size 0
35: NMAS_CanDo sendMessage 0
35: Client Session Destroy Request
35: Local Session Cleared (Not Destroyed)
35: Server thread exited
36: Create NMAS Session
36: RemoteCheckIfLocalUser checking hunter.USERS.CHH.Rho.
36: RemoteCheckIfLocalUser is a local user.
36: Server thread started
36: NMAS_CanDo StartClientSession 0
36: >>ClientPut: message size=8 queue Size 0
36: >>ClientPut: message size=7 queue Size 8
36: NMAS_CanDo sendMessage 0
36: <<ClientGet: message size=8 queue Size 0
36: >>ServerGet: message size=8 queue size 0
36: >>ServerGet: message size=7 queue size 7
36: CanDo
36: ERROR: -1668 Login Restrictions
36: ERROR: -1668 NMAS Manager
36: <<ServerPut: message size=8 queue size 0
36: <<ServerPut: message size=4 queue size 8
36: >>ServerGet: message size=8 queue size 0
36: <<ClientGet: message size=4 queue Size 0
36: NMAS_CanDo sendMessage 0
36: Client Session Destroy Request
36: Local Session Cleared (Not Destroyed)
36: Server thread exited
0 Likes
Anonymous_User Absent Member.
Absent Member.

Re: Attempted access of CIFS share causes intruder lockout

KH wrote:

>30: ERROR: -1642 Login Method
>30: ERROR: -1642 NMAS Manager


This error simply means that you are using a bad password for login.
Did you define a simple password for the user? You should be aware that
the NDS password will not be used for a CIFS login.


>31: ERROR: -1668 Login Restrictions
>31: ERROR: -1668 NMAS Manager


This error means that the account is locked.

--
Marcel Cox
http://support.novell.com/forums
0 Likes
Anonymous_User Absent Member.
Absent Member.

Re: Attempted access of CIFS share causes intruder lockout

I defined a password using ConsoleOne as it was installed on the server
b/c it has the correct snap-ins. It's version 1.3.5. I installed
1.3.6e on my workstation, but I cannot find any snapins on Novell
download site.

I tried copying snapin subdirectories from the C1 server install to my
workstation install, but C1 gave me an error at startup and would not load.

I set the simple password to be the same as my AD & NW password via
Remote Manager. I was able to get to the top level of one share, and
view a couple of directories. After less than a minute, I was "Intruder
Lockout" status again.

KH

Marcel Cox wrote:
> KH wrote:
>
>> 30: ERROR: -1642 Login Method
>> 30: ERROR: -1642 NMAS Manager

>
> This error simply means that you are using a bad password for login.
> Did you define a simple password for the user? You should be aware that
> the NDS password will not be used for a CIFS login.
>
>
>> 31: ERROR: -1668 Login Restrictions
>> 31: ERROR: -1668 NMAS Manager

>
> This error means that the account is locked.
>

0 Likes
Anonymous_User Absent Member.
Absent Member.

Re: Attempted access of CIFS share causes intruder lockout

KH wrote:

>but C1 gave me an error at startup and would not load.


What error?

>I set the simple password to be the same as my AD & NW password via Remote
>Manager. I was able to get to the top level of one share, and view a
>couple of directories. After less than a minute, I was "Intruder Lockout"
>status again.


Did you maybe set the option that the user should change the password at
first login?

--
Marcel Cox (using XanaNews 1.18.1.3)
0 Likes
Anonymous_User Absent Member.
Absent Member.

Re: Attempted access of CIFS share causes intruder lockout

Don't worry about the C1 error, it was b/c I didn't copy the snapins
correctly. I should upgrade C1 on the server to 1.3.6e. BTW, I can't
find snapins for C1 anywhere, other than Zen or GW. Where do I find NSS
snapins and the NMAS or whatever snapin is required to allow me to
change NFA simple passwords for users.

Remote Manager doesn't give me the option to to force a password change.
But, it's certainly behaving as if the initial login is the only
that's being accepted. It didn't lock me out until I tried to access
the 2nd share, which would be a separate login (I guess).

I've definitely never set it to force a password change.

KH

Marcel Cox wrote:
> KH wrote:
>
>> but C1 gave me an error at startup and would not load.

>
> What error?
>
>> I set the simple password to be the same as my AD & NW password via
>> Remote Manager. I was able to get to the top level of one share, and
>> view a couple of directories. After less than a minute, I was
>> "Intruder Lockout" status again.

>
> Did you maybe set the option that the user should change the password at
> first login?
>

0 Likes
Anonymous_User Absent Member.
Absent Member.

Re: Attempted access of CIFS share causes intruder lockout

KH wrote:

>
>Don't worry about the C1 error, it was b/c I didn't copy the snapins
>correctly. I should upgrade C1 on the server to 1.3.6e. BTW, I can't
>find snapins for C1 anywhere, other than Zen or GW. Where do I find NSS
>snapins and the NMAS or whatever snapin is required to allow me to change
>NFA simple passwords for users.


The only reliable source for ConsoleOne snapins is the products they are
associated with an the support packs for these products.
From time to time, Novell has posted soem ConsoleOne snapins on
download.novell.com, but generally these are hopelessly outdated and
sometimes even incomplete.
The best solution to get a local ConsoleOne with the required plugins is
to simply copy the complete ConsoleOne directory structure from the server.
If you want to upgrade ConsoleOne to a newer version, install the upgrade
over the old version, but first take a copy of the old directory structure
in case the upgrade would go wrong.


>Remote Manager doesn't give me the option to to force a password change.
>But, it's certainly behaving as if the initial login is the only that's
>being accepted. It didn't lock me out until I tried to access the 2nd
>share, which would be a separate login (I guess).
>
>I've definitely never set it to force a password change.


There is a special "change password at first login" option for the simple
password. The symptoms you describe seem to point to that you might have
the expiration option set.

--
Marcel Cox (using XanaNews 1.18.1.3)
0 Likes
Anonymous_User Absent Member.
Absent Member.

Re: Attempted access of CIFS share causes intruder lockout

I definitely can consistently get in the first time. When I close and
try again, I get locked out. This happens whether I define a simple
password or remove it entirely.

Where is the "change password at first login" option ? I don't see it
on the Login method tab.

KH

Marcel Cox wrote:
>> Remote Manager doesn't give me the option to to force a password
>> change. But, it's certainly behaving as if the initial login is the
>> only that's being accepted. It didn't lock me out until I tried to
>> access the 2nd share, which would be a separate login (I guess).
>>
>> I've definitely never set it to force a password change.

>
> There is a special option for the
> simple password. The symptoms you describe seem to point to that you
> might have the expiration option set.
>

0 Likes
Anonymous_User Absent Member.
Absent Member.

Re: Attempted access of CIFS share causes intruder lockout

KH wrote:

>Where is the "change password at first login" option ?


It's right next to the simple password field in consoleone.

--
Marcel Cox (using XanaNews 1.18.1.3)
0 Likes
Anonymous_User Absent Member.
Absent Member.

Re: Attempted access of CIFS share causes intruder lockout

Marcel Cox wrote:
> KH wrote:
>
>> Where is the "change password at first login" option ?

>
> It's right next to the simple password field in consoleone.
>


I've never checked that box, so I'm at an impass. Where do I go from here ?
0 Likes
Anonymous_User Absent Member.
Absent Member.

Re: Attempted access of CIFS share causes intruder lockout

KH wrote:

>Where do I go from here ?


MAybe post a new NMAS log for your current situation. The NMAS log should
show botht he successful and the failed login.
Also, are you sure there you haven't enabled universal password or enabled
some other password policies?

--
Marcel Cox (using XanaNews 1.18.1.3)
0 Likes
Anonymous_User Absent Member.
Absent Member.

Re: Attempted access of CIFS share causes intruder lockout

Marcel Cox wrote:
> KH wrote:
>
>> Where do I go from here ?

>
> MAybe post a new NMAS log for your current situation. The NMAS log
> should show botht he successful and the failed login.
> Also, are you sure there you haven't enabled universal password or
> enabled some other password policies?
>


Ok, here it is below.

BTW, coincidentally or not, I've had two users get locked out of their
workstations, but both swear not to have tried to log back in and fail.
Server console said "intruder lockout" for one of the users, and "NMAS
intruder lockout" for the other.

Just when I think I get it, I don't.

Previous tests were done from computers on the domain. The test just
now was done from a new XP install not yet on the domain. I logged in
as local administrator ( failed logins you will see ). I was able to
see the shares, change to different shares w/in same windows explorer
session, close windows explorer and open new shares w/o being prompted
for login again ( didn't happen that way on domain computer ).

It wasn't until I logged out & logged back in as local administrator and
attempt to attach to a share that it failed. I know I typed the
password correctly. I tried many times, as you'll see.

One other big difference is that I wasn't locked out of NetWare. No
intruder lockouts on the server console this time.

**** nmasmon log ****


NMAS Enterprise Edition
0: Screen and file output started at Fri Jun 23 17:56:47 2006

40: Destroy NMAS Session for reuse
40: Create NMAS Session
40: RemoteCheckIfLocalUser checking Administrator.USERS.CHH.Rho.
40: ERROR: -601 RemoteCheckIfLocalUser: DDCResolveName
40: ERROR: -601 RemoteCheckIfLocalUser failed.
40: NCPCheckIfLocalUser failed -601
40: Client Session Destroy Request
40: Destroy NMAS Session
40: Aborted Session Destroyed (with MAF)
41: Destroy NMAS Session for reuse
41: Create NMAS Session
41: RemoteCheckIfLocalUser checking Administrator.USERS.CHH.Rho.
41: ERROR: -601 RemoteCheckIfLocalUser: DDCResolveName
41: ERROR: -601 RemoteCheckIfLocalUser failed.
41: NCPCheckIfLocalUser failed -601
41: Client Session Destroy Request
41: Destroy NMAS Session
41: Aborted Session Destroyed (with MAF)
42: Destroy NMAS Session for reuse
42: Create NMAS Session
42: RemoteCheckIfLocalUser checking Administrator.USERS.CHH.Rho.
42: ERROR: -601 RemoteCheckIfLocalUser: DDCResolveName
42: ERROR: -601 RemoteCheckIfLocalUser failed.
42: NCPCheckIfLocalUser failed -601
42: Client Session Destroy Request
42: Destroy NMAS Session
42: Aborted Session Destroyed (with MAF)
43: Destroy NMAS Session for reuse
43: Create NMAS Session
43: RemoteCheckIfLocalUser checking Administrator.USERS.CHH.Rho.
43: ERROR: -601 RemoteCheckIfLocalUser: DDCResolveName
43: ERROR: -601 RemoteCheckIfLocalUser failed.
43: NCPCheckIfLocalUser failed -601
43: Client Session Destroy Request
43: Destroy NMAS Session
43: Aborted Session Destroyed (with MAF)
44: Destroy NMAS Session for reuse
44: Create NMAS Session
44: RemoteCheckIfLocalUser checking Administrator.USERS.CHH.Rho.
44: ERROR: -601 RemoteCheckIfLocalUser: DDCResolveName
44: ERROR: -601 RemoteCheckIfLocalUser failed.
44: NCPCheckIfLocalUser failed -601
44: Client Session Destroy Request
44: Destroy NMAS Session
44: Aborted Session Destroyed (with MAF)
45: Destroy NMAS Session for reuse
45: Create NMAS Session
45: RemoteCheckIfLocalUser checking Administrator.USERS.CHH.Rho.
45: ERROR: -601 RemoteCheckIfLocalUser: DDCResolveName
45: ERROR: -601 RemoteCheckIfLocalUser failed.
45: NCPCheckIfLocalUser failed -601
45: Client Session Destroy Request
45: Destroy NMAS Session
45: Aborted Session Destroyed (with MAF)
46: Destroy NMAS Session for reuse
46: Create NMAS Session
46: RemoteCheckIfLocalUser checking Administrator.USERS.CHH.Rho.
46: ERROR: -601 RemoteCheckIfLocalUser: DDCResolveName
46: ERROR: -601 RemoteCheckIfLocalUser failed.
46: NCPCheckIfLocalUser failed -601
46: Client Session Destroy Request
46: Destroy NMAS Session
46: Aborted Session Destroyed (with MAF)
47: Destroy NMAS Session for reuse
47: Create NMAS Session
47: RemoteCheckIfLocalUser checking Administrator.USERS.CHH.Rho.
47: ERROR: -601 RemoteCheckIfLocalUser: DDCResolveName
47: ERROR: -601 RemoteCheckIfLocalUser failed.
47: NCPCheckIfLocalUser failed -601
47: Client Session Destroy Request
47: Destroy NMAS Session
47: Aborted Session Destroyed (with MAF)
48: Destroy NMAS Session for reuse
48: Create NMAS Session
48: RemoteCheckIfLocalUser checking Administrator.USERS.CHH.Rho.
48: ERROR: -601 RemoteCheckIfLocalUser: DDCResolveName
48: ERROR: -601 RemoteCheckIfLocalUser failed.
48: NCPCheckIfLocalUser failed -601
48: Client Session Destroy Request
48: Destroy NMAS Session
48: Aborted Session Destroyed (with MAF)
49: Destroy NMAS Session for reuse
49: Create NMAS Session
49: RemoteCheckIfLocalUser checking Administrator.USERS.CHH.Rho.
49: ERROR: -601 RemoteCheckIfLocalUser: DDCResolveName
49: ERROR: -601 RemoteCheckIfLocalUser failed.
49: NCPCheckIfLocalUser failed -601
49: Client Session Destroy Request
49: Destroy NMAS Session
49: Aborted Session Destroyed (with MAF)
50: Destroy NMAS Session for reuse
50: Create NMAS Session
50: RemoteCheckIfLocalUser checking Administrator.USERS.CHH.Rho.
50: ERROR: -601 RemoteCheckIfLocalUser: DDCResolveName
50: ERROR: -601 RemoteCheckIfLocalUser failed.
50: NCPCheckIfLocalUser failed -601
50: Client Session Destroy Request
50: Destroy NMAS Session
50: Aborted Session Destroyed (with MAF)
51: Destroy NMAS Session for reuse
51: Create NMAS Session
51: RemoteCheckIfLocalUser checking Administrator.USERS.CHH.Rho.
51: ERROR: -601 RemoteCheckIfLocalUser: DDCResolveName
51: ERROR: -601 RemoteCheckIfLocalUser failed.
51: NCPCheckIfLocalUser failed -601
51: Client Session Destroy Request
51: Destroy NMAS Session
51: Aborted Session Destroyed (with MAF)
52: Destroy NMAS Session for reuse
52: Create NMAS Session
52: RemoteCheckIfLocalUser checking Administrator.USERS.CHH.Rho.
52: ERROR: -601 RemoteCheckIfLocalUser: DDCResolveName
52: ERROR: -601 RemoteCheckIfLocalUser failed.
52: NCPCheckIfLocalUser failed -601
52: Client Session Destroy Request
52: Destroy NMAS Session
52: Aborted Session Destroyed (with MAF)
53: Destroy NMAS Session for reuse
53: Create NMAS Session
53: RemoteCheckIfLocalUser checking hunter.USERS.CHH.Rho.
53: RemoteCheckIfLocalUser is a local user.
53: Server thread started
53: >>ServerGet: message size=8 queue size 0
53: NMAS_CanDo StartClientSession 0
53: >>ClientPut: message size=8 queue Size 0
53: >>ClientPut: message size=7 queue Size 8
53: NMAS_CanDo sendMessage 0
53: <<ClientGet: message size=8 queue Size 0
53: >>ServerGet: message size=7 queue size 0
53: CanDo
53: Sequence Selected == "LSMCIFS"
53: Login Method 0x0000000D
53: MAF_Begin LSM 0x0000000D
53: <<ServerPut: message size=8 queue size 0
53: <<ServerPut: message size=5 queue size 8
53: MAF_Read LSM 0x0000000D
53: >>ServerGet: message size=8 queue size 0
53: <<ClientGet: message size=5 queue Size 0
53: NMAS_CanDo sendMessage 0
53: NMAS_CanDo disassembleDoPacket 0
53: MAF_Begin LCM 0x0000000D
53: MAF_Write LCM 0x0000000D
53: >>ClientPut: message size=8 queue Size 0
53: >>ClientPut: message size=2449 queue Size 8
53: MAF_Read LCM 0x0000000D
53: <<ClientGet: message size=8 queue Size 0
53: >>ServerGet: message size=2449 queue size 0
53: MAF_Write LSM 0x0000000D
53: <<ServerPut: message size=8 queue size 0
53: <<ServerPut: message size=2449 queue size 8
53: MAF_Read LSM 0x0000000D
53: >>ServerGet: message size=8 queue size 0
53: <<ClientGet: message size=2449 queue Size 0
53: MAF_Write LCM 0x0000000D
53: >>ClientPut: message size=8 queue Size 0
53: >>ClientPut: message size=2449 queue Size 8
53: MAF_Read LCM 0x0000000D
53: <<ClientGet: message size=8 queue Size 0
53: >>ServerGet: message size=2449 queue size 0
53: MAF_Write LSM 0x0000000D
53: <<ServerPut: message size=8 queue size 0
53: <<ServerPut: message size=2449 queue size 8
53: MAF_End LSM 0x0000000D
53: LSM 0x0000000D successful
53: >>ServerGet: message size=8 queue size 0
53: <<ClientGet: message size=2449 queue Size 0
53: MAF_End LCM 0x0000000D
53: >>ClientPut: message size=8 queue Size 0
53: <<ClientGet: message size=8 queue Size 0
53: WhatNext
53: Successful login
53: <<ServerPut: message size=8 queue size 0
53: <<ServerPut: message size=4 queue size 8
53: <<ClientGet: message size=4 queue Size 0
53: >>ClientPut: message size=8 queue Size 0
53: <<ClientGet: message size=8 queue Size 0
53: >>ServerGet: message size=8 queue size 8
53: <<ServerPut: message size=8 queue size 0
53: Server thread exited
53: Client Session Destroy Request
53: Local Session Cleared (Not Destroyed)
54: Destroy NMAS Session for reuse
54: Create NMAS Session
54: RemoteCheckIfLocalUser checking Administrator.USERS.CHH.Rho.
54: ERROR: -601 RemoteCheckIfLocalUser: DDCResolveName
54: ERROR: -601 RemoteCheckIfLocalUser failed.
54: NCPCheckIfLocalUser failed -601
54: Client Session Destroy Request
54: Destroy NMAS Session
54: Aborted Session Destroyed (with MAF)
55: Destroy NMAS Session for reuse
55: Create NMAS Session
55: RemoteCheckIfLocalUser checking Administrator.USERS.CHH.Rho.
55: ERROR: -601 RemoteCheckIfLocalUser: DDCResolveName
55: ERROR: -601 RemoteCheckIfLocalUser failed.
55: NCPCheckIfLocalUser failed -601
55: Client Session Destroy Request
55: Destroy NMAS Session
55: Aborted Session Destroyed (with MAF)
56: Destroy NMAS Session for reuse
56: Create NMAS Session
56: RemoteCheckIfLocalUser checking Administrator.USERS.CHH.Rho.
56: ERROR: -601 RemoteCheckIfLocalUser: DDCResolveName
56: ERROR: -601 RemoteCheckIfLocalUser failed.
56: NCPCheckIfLocalUser failed -601
56: Client Session Destroy Request
56: Destroy NMAS Session
56: Aborted Session Destroyed (with MAF)
57: Destroy NMAS Session for reuse
57: Create NMAS Session
57: RemoteCheckIfLocalUser checking Administrator.USERS.CHH.Rho.
57: ERROR: -601 RemoteCheckIfLocalUser: DDCResolveName
57: ERROR: -601 RemoteCheckIfLocalUser failed.
57: NCPCheckIfLocalUser failed -601
57: Client Session Destroy Request
57: Destroy NMAS Session
57: Aborted Session Destroyed (with MAF)
58: Destroy NMAS Session for reuse
58: Create NMAS Session
58: RemoteCheckIfLocalUser checking Administrator.USERS.CHH.Rho.
58: ERROR: -601 RemoteCheckIfLocalUser: DDCResolveName
58: ERROR: -601 RemoteCheckIfLocalUser failed.
58: NCPCheckIfLocalUser failed -601
58: Client Session Destroy Request
58: Destroy NMAS Session
58: Aborted Session Destroyed (with MAF)
59: Destroy NMAS Session for reuse
59: Create NMAS Session
59: RemoteCheckIfLocalUser checking Administrator.USERS.CHH.Rho.
59: ERROR: -601 RemoteCheckIfLocalUser: DDCResolveName
59: ERROR: -601 RemoteCheckIfLocalUser failed.
59: NCPCheckIfLocalUser failed -601
59: Client Session Destroy Request
59: Destroy NMAS Session
59: Aborted Session Destroyed (with MAF)
60: Destroy NMAS Session for reuse
60: Create NMAS Session
60: RemoteCheckIfLocalUser checking Administrator.USERS.CHH.Rho.
60: ERROR: -601 RemoteCheckIfLocalUser: DDCResolveName
60: ERROR: -601 RemoteCheckIfLocalUser failed.
60: NCPCheckIfLocalUser failed -601
60: Client Session Destroy Request
60: Destroy NMAS Session
60: Aborted Session Destroyed (with MAF)
61: Destroy NMAS Session for reuse
61: Create NMAS Session
61: RemoteCheckIfLocalUser checking Administrator.USERS.CHH.Rho.
61: ERROR: -601 RemoteCheckIfLocalUser: DDCResolveName
61: ERROR: -601 RemoteCheckIfLocalUser failed.
61: NCPCheckIfLocalUser failed -601
61: Client Session Destroy Request
61: Destroy NMAS Session
61: Aborted Session Destroyed (with MAF)
62: Destroy NMAS Session for reuse
62: Create NMAS Session
62: RemoteCheckIfLocalUser checking Administrator.USERS.CHH.Rho.
62: ERROR: -601 RemoteCheckIfLocalUser: DDCResolveName
62: ERROR: -601 RemoteCheckIfLocalUser failed.
62: NCPCheckIfLocalUser failed -601
62: Client Session Destroy Request
62: Destroy NMAS Session
62: Aborted Session Destroyed (with MAF)
63: Destroy NMAS Session for reuse
63: Create NMAS Session
63: RemoteCheckIfLocalUser checking Administrator.USERS.CHH.Rho.
63: ERROR: -601 RemoteCheckIfLocalUser: DDCResolveName
63: ERROR: -601 RemoteCheckIfLocalUser failed.
63: NCPCheckIfLocalUser failed -601
63: Client Session Destroy Request
63: Destroy NMAS Session
63: Aborted Session Destroyed (with MAF)
0: Destroy NMAS Session for reuse
0: Create NMAS Session
0: RemoteCheckIfLocalUser checking hunter.USERS.CHH.Rho.
0: RemoteCheckIfLocalUser is a local user.
0: Server thread started
0: >>ServerGet: message size=8 queue size 0
0: NMAS_CanDo StartClientSession 0
0: >>ClientPut: message size=8 queue Size 0
0: >>ClientPut: message size=7 queue Size 8
0: NMAS_CanDo sendMessage 0
0: <<ClientGet: message size=8 queue Size 0
0: >>ServerGet: message size=7 queue size 0
0: CanDo
0: Sequence Selected == "LSMCIFS"
0: Login Method 0x0000000D
0: MAF_Begin LSM 0x0000000D
0: <<ServerPut: message size=8 queue size 0
0: <<ServerPut: message size=5 queue size 8
0: MAF_Read LSM 0x0000000D
0: >>ServerGet: message size=8 queue size 0
0: <<ClientGet: message size=5 queue Size 0
0: NMAS_CanDo sendMessage 0
0: NMAS_CanDo disassembleDoPacket 0
0: MAF_Begin LCM 0x0000000D
0: MAF_Write LCM 0x0000000D
0: >>ClientPut: message size=8 queue Size 0
0: >>ClientPut: message size=2449 queue Size 8
0: MAF_Read LCM 0x0000000D
0: <<ClientGet: message size=8 queue Size 0
0: >>ServerGet: message size=2449 queue size 0
0: MAF_Write LSM 0x0000000D
0: <<ServerPut: message size=8 queue size 0
0: <<ServerPut: message size=2449 queue size 8
0: MAF_Read LSM 0x0000000D
0: >>ServerGet: message size=8 queue size 0
0: <<ClientGet: message size=2449 queue Size 0
0: MAF_Write LCM 0x0000000D
0: >>ClientPut: message size=8 queue Size 0
0: >>ClientPut: message size=2449 queue Size 8
0: MAF_Read LCM 0x0000000D
0: <<ClientGet: message size=8 queue Size 0
0: >>ServerGet: message size=2449 queue size 0
0: MAF_Write LSM 0x0000000D
0: <<ServerPut: message size=8 queue size 0
0: <<ServerPut: message size=2449 queue size 8
0: MAF_End LSM 0x0000000D
0: LSM 0x0000000D failed
0: ERROR: -1642 Login Method
0: ERROR: -1642 NMAS Manager
0: <<ServerPut: message size=8 queue size 2449
0: <<ServerPut: message size=4 queue size 2457
0: >>ServerGet: message size=8 queue size 0
0: <<ClientGet: message size=2449 queue Size 0
0: MAF_End LCM 0x0000000D
0: >>ClientPut: message size=8 queue Size 0
0: <<ClientGet: message size=8 queue Size 12
0: <<ClientGet: message size=4 queue Size 4
0: >>ServerGet: message size=8 queue size 0
0: >>ClientPut: message size=8 queue Size 0
0: <<ClientGet: message size=8 queue Size 0
0: <<ServerPut: message size=8 queue size 0
0: Server thread exited
0: Client Session Destroy Request
0: Local Session Cleared (Not Destroyed)
1: Destroy NMAS Session for reuse
1: Create NMAS Session
1: RemoteCheckIfLocalUser checking hunter.USERS.CHH.Rho.
1: RemoteCheckIfLocalUser is a local user.
1: Server thread started
1: NMAS_CanDo StartClientSession 0
1: >>ClientPut: message size=8 queue Size 0
1: >>ClientPut: message size=7 queue Size 8
1: NMAS_CanDo sendMessage 0
1: <<ClientGet: message size=8 queue Size 0
1: >>ServerGet: message size=8 queue size 0
1: >>ServerGet: message size=7 queue size 7
1: CanDo
1: Sequence Selected == "LSMCIFS"
1: Login Method 0x0000000D
1: MAF_Begin LSM 0x0000000D
1: <<ServerPut: message size=8 queue size 0
1: <<ServerPut: message size=5 queue size 8
1: MAF_Read LSM 0x0000000D
1: >>ServerGet: message size=8 queue size 0
1: <<ClientGet: message size=5 queue Size 0
1: NMAS_CanDo sendMessage 0
1: NMAS_CanDo disassembleDoPacket 0
1: MAF_Begin LCM 0x0000000D
1: MAF_Write LCM 0x0000000D
1: >>ClientPut: message size=8 queue Size 0
1: >>ClientPut: message size=2449 queue Size 8
1: MAF_Read LCM 0x0000000D
1: >>ServerGet: message size=2449 queue size 0
1: MAF_Write LSM 0x0000000D
1: <<ServerPut: message size=8 queue size 0
1: <<ServerPut: message size=2449 queue size 8
1: MAF_Read LSM 0x0000000D
1: >>ServerGet: message size=8 queue size 0
1: <<ClientGet: message size=8 queue Size 0
1: <<ClientGet: message size=2449 queue Size 2449
1: MAF_Write LCM 0x0000000D
1: >>ClientPut: message size=8 queue Size 0
1: >>ClientPut: message size=2449 queue Size 8
1: MAF_Read LCM 0x0000000D
1: <<ClientGet: message size=8 queue Size 0
1: >>ServerGet: message size=2449 queue size 0
1: MAF_Write LSM 0x0000000D
1: <<ServerPut: message size=8 queue size 0
1: <<ServerPut: message size=2449 queue size 8
1: <<ClientGet: message size=2449 queue Size 0
1: MAF_End LCM 0x0000000D
1: >>ClientPut: message size=8 queue Size 0
1: <<ClientGet: message size=8 queue Size 0
1: MAF_End LSM 0x0000000D
1: LSM 0x0000000D failed
1: ERROR: -1642 Login Method
1: ERROR: -1642 NMAS Manager
1: <<ServerPut: message size=8 queue size 0
1: <<ServerPut: message size=4 queue size 8
1: >>ServerGet: message size=8 queue size 8
1: >>ServerGet: message size=8 queue size 0
1: <<ClientGet: message size=4 queue Size 0
1: >>ClientPut: message size=8 queue Size 0
1: <<ClientGet: message size=8 queue Size 0
1: <<ServerPut: message size=8 queue size 0
1: Server thread exited
1: Client Session Destroy Request
1: Local Session Cleared (Not Destroyed)
2: Destroy NMAS Session for reuse
2: Create NMAS Session
2: RemoteCheckIfLocalUser checking hunter.USERS.CHH.Rho.
2: RemoteCheckIfLocalUser is a local user.
2: Server thread started
2: NMAS_CanDo StartClientSession 0
2: >>ClientPut: message size=8 queue Size 0
2: >>ServerGet: message size=8 queue size 0
2: >>ServerGet: message size=7 queue size 0
2: >>ClientPut: message size=7 queue Size 8
2: NMAS_CanDo sendMessage 0
2: <<ClientGet: message size=8 queue Size 0
2: CanDo
2: Sequence Selected == "LSMCIFS"
2: Login Method 0x0000000D
2: MAF_Begin LSM 0x0000000D
2: <<ServerPut: message size=8 queue size 0
2: <<ServerPut: message size=5 queue size 8
2: MAF_Read LSM 0x0000000D
2: >>ServerGet: message size=8 queue size 0
2: <<ClientGet: message size=5 queue Size 0
2: NMAS_CanDo sendMessage 0
2: NMAS_CanDo disassembleDoPacket 0
2: MAF_Begin LCM 0x0000000D
2: MAF_Write LCM 0x0000000D
2: >>ClientPut: message size=8 queue Size 0
2: >>ClientPut: message size=2449 queue Size 8
2: MAF_Read LCM 0x0000000D
2: <<ClientGet: message size=8 queue Size 0
2: >>ServerGet: message size=2449 queue size 0
2: MAF_Write LSM 0x0000000D
2: <<ServerPut: message size=8 queue size 0
2: <<ServerPut: message size=2449 queue size 8
2: MAF_Read LSM 0x0000000D
2: >>ServerGet: message size=8 queue size 0
2: <<ClientGet: message size=2449 queue Size 0
2: MAF_Write LCM 0x0000000D
2: >>ClientPut: message size=8 queue Size 0
2: >>ClientPut: message size=2449 queue Size 8
2: MAF_Read LCM 0x0000000D
2: <<ClientGet: message size=8 queue Size 0
2: >>ServerGet: message size=2449 queue size 0
2: MAF_Write LSM 0x0000000D
2: <<ServerPut: message size=8 queue size 0
2: <<ServerPut: message size=2449 queue size 8
2: MAF_End LSM 0x0000000D
2: LSM 0x0000000D failed
2: ERROR: -1642 Login Method
2: ERROR: -1642 NMAS Manager
2: <<ServerPut: message size=8 queue size 2449
2: <<ServerPut: message size=4 queue size 2457
2: >>ServerGet: message size=8 queue size 0
2: <<ClientGet: message size=2449 queue Size 0
2: MAF_End LCM 0x0000000D
2: >>ClientPut: message size=8 queue Size 0
2: <<ClientGet: message size=8 queue Size 12
2: <<ClientGet: message size=4 queue Size 4
2: >>ClientPut: message size=8 queue Size 0
2: <<ClientGet: message size=8 queue Size 0
2: >>ServerGet: message size=8 queue size 0
2: <<ServerPut: message size=8 queue size 0
2: Server thread exited
2: Client Session Destroy Request
2: Local Session Cleared (Not Destroyed)
3: Destroy NMAS Session for reuse
3: Create NMAS Session
3: RemoteCheckIfLocalUser checking Administrator.USERS.CHH.Rho.
3: ERROR: -601 RemoteCheckIfLocalUser: DDCResolveName
3: ERROR: -601 RemoteCheckIfLocalUser failed.
3: NCPCheckIfLocalUser failed -601
3: Client Session Destroy Request
3: Destroy NMAS Session
3: Aborted Session Destroyed (with MAF)
4: Destroy NMAS Session for reuse
4: Create NMAS Session
4: RemoteCheckIfLocalUser checking Administrator.USERS.CHH.Rho.
4: ERROR: -601 RemoteCheckIfLocalUser: DDCResolveName
4: ERROR: -601 RemoteCheckIfLocalUser failed.
4: NCPCheckIfLocalUser failed -601
4: Client Session Destroy Request
4: Destroy NMAS Session
4: Aborted Session Destroyed (with MAF)
5: Destroy NMAS Session for reuse
5: Create NMAS Session
5: RemoteCheckIfLocalUser checking Administrator.USERS.CHH.Rho.
5: ERROR: -601 RemoteCheckIfLocalUser: DDCResolveName
5: ERROR: -601 RemoteCheckIfLocalUser failed.
5: NCPCheckIfLocalUser failed -601
5: Client Session Destroy Request
5: Destroy NMAS Session
5: Aborted Session Destroyed (with MAF)
6: Destroy NMAS Session for reuse
6: Create NMAS Session
6: RemoteCheckIfLocalUser checking Administrator.USERS.CHH.Rho.
6: ERROR: -601 RemoteCheckIfLocalUser: DDCResolveName
6: ERROR: -601 RemoteCheckIfLocalUser failed.
6: NCPCheckIfLocalUser failed -601
6: Client Session Destroy Request
6: Destroy NMAS Session
6: Aborted Session Destroyed (with MAF)
0 Likes
The opinions expressed above are the personal opinions of the authors, not of Micro Focus. By using this site, you accept the Terms of Use and Rules of Participation. Certain versions of content ("Material") accessible here may contain branding from Hewlett-Packard Company (now HP Inc.) and Hewlett Packard Enterprise Company. As of September 1, 2017, the Material is now offered by Micro Focus, a separately owned and operated company. Any reference to the HP and Hewlett Packard Enterprise/HPE marks is historical in nature, and the HP and Hewlett Packard Enterprise/HPE marks are the property of their respective owners.