Anonymous_User Absent Member.
Absent Member.
4082 views

QL2300.HAM detect LUN as Unknown Device Type

On Netware 6.5 SP3, QL2300 detect LUN as Unknown Device Type and not as HDD.

list devices command show:
list devices
0x0001: [V024-A0-D1:0] Legacy Floppy [FLOPPY]

0x000A: [V504-A2-D0:0] HP Smart Array 6i Slot 0 ID 0 LUN 0 [HDD]

0x0010: [V025-A1-D0:0] TEAC DV-28E-N C.6B [CD]

0x0012: [V597-A4-D0:0] COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)

0x0013: [V597-A4-D1:0] COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)

0x0015: [V597-A5-D0:0] COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)

0x0016: [V597-A5-D1:0] COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)

From NoRM, we see for 1 Storage Adapter:
QL2300 PCI FC Host Adapter Module Slot: 2
Device Name: COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
Device Type: Unknown
Capacity: 0 MB
TID: 1
LUN: 0
Object ID: 13h

Device Name: COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
Device Type: Unknown
Capacity: 0 MB
TID: 0
LUN: 0
Object ID: 12h


From NSSMU or iManager i cannot see HDD.
What are specifications to see correctly LUN?

Best regards,

Gildas BOMPOIL
System Engineer
Software Spectrum
gildas.bompoil@softwarespectrum.com

details:
Server HP DL380 G4
Bios Firmware : P51 06/02/2005
HBA1: QLogic PCI Fibre Channel NetWare Driver
QLogic Name QLA2340 (HP Name FCA2214)
Files : QL2300.HAM, QL2300.DDI
Version : 6.80f (6.80.06)
Firmware : 1.45
Slot : 2
HBA2: QLogic PCI Fibre Channel NetWare Driver
QLogic Name QLA2340 HP Name FCA2214
Files : QL2300.HAM, QL2300.DDI
Version : 6.80f (6.80.06)
Firmware : 1.45
Slot : 3

SAN HP StorageWorks MA8000
HSG80 : ACS 8.7 f1
LUN: 438 Go (146x4 RAID5)

OS NetWare 6.5 SP3
QL2300.HAM : 6.80f (6.80.06)
CPQSHD.CDM: 2.04 (4 Apr 2005)

HP Secure Path 3.0C SP 2.1
HPQSP.CDM: 0.11.25

Startup.ncf:
LOAD ACPIDRV.PSM
######## End PSM Drivers ########
LOAD CPQSHD.CDM
LOAD IDECD.CDM
######## End CDM Drivers ########
LOAD IDEATA.HAM SLOT=10011
LOAD CPQRAID.HAM SLOT=10019
#LOAD QL2300.HAM SLOT=2 /LUNS
#LOAD QL2300.HAM SLOT=3 /LUNS
# Modified by Compaq SecurePath installation program SP30C SP2.1
load HPQSP.CDM
load QL2300.HAM /luns /allpaths /portnames SLOT=2
load QL2300.HAM /luns /allpaths /portnames SLOT=3
######## End HAM Drivers ########
LOAD KEYB.NLM France
LOAD CHARSET.NLM CP850


Labels (2)
0 Likes
9 Replies
Anonymous_User Absent Member.
Absent Member.

Re: QL2300.HAM detect LUN as Unknown Device Type

how, and what do you connect to te adapter? is a FC switch involved?
in the logger screen, what ouput is displayed when ql2300 loads?


> On Netware 6.5 SP3, QL2300 detect LUN as Unknown Device Type and not as

HDD.
>
> list devices command show:
> list devices
> 0x0001: [V024-A0-D1:0] Legacy Floppy [FLOPPY]
>
> 0x000A: [V504-A2-D0:0] HP Smart Array 6i Slot 0 ID 0 LUN 0 [HDD]
>
> 0x0010: [V025-A1-D0:0] TEAC DV-28E-N C.6B [CD]
>
> 0x0012: [V597-A4-D0:0] COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
>
> 0x0013: [V597-A4-D1:0] COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
>
> 0x0015: [V597-A5-D0:0] COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
>
> 0x0016: [V597-A5-D1:0] COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
>
> From NoRM, we see for 1 Storage Adapter:
> QL2300 PCI FC Host Adapter Module Slot: 2
> Device Name: COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
> Device Type: Unknown
> Capacity: 0 MB
> TID: 1
> LUN: 0
> Object ID: 13h
>
> Device Name: COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
> Device Type: Unknown
> Capacity: 0 MB
> TID: 0
> LUN: 0
> Object ID: 12h
>
>
> From NSSMU or iManager i cannot see HDD.
> What are specifications to see correctly LUN?
>
> Best regards,
>
> Gildas BOMPOIL
> System Engineer
> Software Spectrum
> gildas.bompoil@softwarespectrum.com
>
> details:
> Server HP DL380 G4
> Bios Firmware : P51 06/02/2005
> HBA1: QLogic PCI Fibre Channel NetWare Driver
> QLogic Name QLA2340 (HP Name FCA2214)
> Files : QL2300.HAM, QL2300.DDI
> Version : 6.80f (6.80.06)
> Firmware : 1.45
> Slot : 2
> HBA2: QLogic PCI Fibre Channel NetWare Driver
> QLogic Name QLA2340 HP Name FCA2214
> Files : QL2300.HAM, QL2300.DDI
> Version : 6.80f (6.80.06)
> Firmware : 1.45
> Slot : 3
>
> SAN HP StorageWorks MA8000
> HSG80 : ACS 8.7 f1
> LUN: 438 Go (146x4 RAID5)
>
> OS NetWare 6.5 SP3
> QL2300.HAM : 6.80f (6.80.06)
> CPQSHD.CDM: 2.04 (4 Apr 2005)
>
> HP Secure Path 3.0C SP 2.1
> HPQSP.CDM: 0.11.25
>
> Startup.ncf:
> LOAD ACPIDRV.PSM
> ######## End PSM Drivers ########
> LOAD CPQSHD.CDM
> LOAD IDECD.CDM
> ######## End CDM Drivers ########
> LOAD IDEATA.HAM SLOT=10011
> LOAD CPQRAID.HAM SLOT=10019
> #LOAD QL2300.HAM SLOT=2 /LUNS
> #LOAD QL2300.HAM SLOT=3 /LUNS
> # Modified by Compaq SecurePath installation program SP30C SP2.1
> load HPQSP.CDM
> load QL2300.HAM /luns /allpaths /portnames SLOT=2
> load QL2300.HAM /luns /allpaths /portnames SLOT=3
> ######## End HAM Drivers ########
> LOAD KEYB.NLM France
> LOAD CHARSET.NLM CP850
>
>



0 Likes
Anonymous_User Absent Member.
Absent Member.

Re: QL2300.HAM detect LUN as Unknown Device Type

FCA2214 are connected to HP SAN StorageWorks FC switch 4/32 who are
connected to HSG80.

On HP SAN MA8000, we see the connection of FCA2214 on HSG80.

log:
Loading module QL2300.HAM

QLogic QL2300 HAM Driver

Version 6.80.06 15 July 2004

Copyright 1995-2004 QLogic Corporation. All rights reserved.

QL2300.HAM: QLA2312 Adapter 0 Memory Address 0x4985D000 IRQ 5

QL2300.HAM: Reading configuration from memory (0 bytes)

QL2300.HAM: Slot 2 loading instance 0

QL2300.HAM: Maximum luns per id 128

QL2300.HAM: Maximum ids 255

QL2300.HAM: Login retry count 0

QL2300.HAM: Link down timeout period 8s

QL2300.HAM: Port down timeout period 16s

QL2300.HAM: Failback delay period 12s

QL2300.HAM: Reporting all adapter paths (path failover disabled)

QL2300.HAM: Reporting all device ports (port failover disabled)

QL2300.HAM: FC-Tape protocol enabled

Loading module ACPICMGR.NLM

QL2300.HAM: PCI function 0

Module QL2300.HAM load status OK

Loading module QL2300.HAM

QL2300.HAM: QLA2312 Adapter 1 Memory Address 0x4985E000 IRQ 5

QL2300.HAM: Reading configuration from memory (0 bytes)

QL2300.HAM: Slot 3 loading instance 1

QL2300.HAM: Maximum luns per id 128

QL2300.HAM: Maximum ids 255

QL2300.HAM: Login retry count 0

QL2300.HAM: Link down timeout period 8s

QL2300.HAM: Port down timeout period 16s

QL2300.HAM: Failback delay period 12s

QL2300.HAM: Reporting all adapter paths (path failover disabled)

QL2300.HAM: Reporting all device ports (port failover disabled)

QL2300.HAM: FC-Tape protocol enabled

QL2300.HAM: PCI function 0

Previously loaded module was used re-entrantly

Module QL2300.HAM load status OK

i also tested:
- load LOAD QL2300.HAM SLOT=2 /LUNS /MAXLUNS=256
- LOAD QL2300.HAM SLOT=2 /LUNS /INQUIRY
- LOAD QL2300.HAM SLOT=2 /LUNS /STARTUNIT
- LOAD QL2300.HAM SLOT=2 /LUNS /QUALIFIED
- LOAD QL2300.HAM SLOT=2 /ALLPATHS /LUNZERO

part of Config.txt:
Storage Device Summary:
0x0000 [V024-A0] Legacy FLOPPY Controller
0x0001 [V024-A0-D1:0] Legacy Floppy
0x0002 [V100-A100] USB UHCI Controller
0x0003 [V100-A101] USB UHCI Controller
0x0004 [V100-A102] USB UHCI Controller
0x0005 [V100-A103] USB UHCI Controller
0x0006 [V100-A104] USB EHCI Controller
0x0007 [V025-A1] Novell ATA/IDE Host Adapter Module
0x0010 [V025-A1-D0:0] TEAC DV-28E-N C.6B
0x0008 [V504-A2] HP Unified RAID Driver
0x000A [V504-A2-D0:0] HP Smart Array 6i Slot 0 ID 0 LUN 0
0x000B DOS Partitioned Media
0x000F [V504-A2-D0:0-P53FF] Free Partition Space
0x000C [V504-A2-D0:0-P0] Big DOS; OS/2; Win95 Partition
0x000D [V504-A2-D0:0-P1F6] NSS Partition
0x000E [V504-A2-D0:0-P53FE] Free Partition Space
0x0009 [V7C1-A3] HP Virtual Host Adapter Module
0x0011 [V597-A4] QL2300 PCI FC Host Adapter Module
0x0013 [V597-A4-D1:0] COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
0x0012 [V597-A4-D0:0] COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
0x0014 [V597-A5] QL2300 PCI FC Host Adapter Module
0x0016 [V597-A5-D1:0] COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
0x0015 [V597-A5-D0:0] COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)

Storage Device Details:
[V597-A4] QL2300 PCI FC Host Adapter Module
Media Manager object ID..: 0x0011
Media Manager Object Type: Adapter
Driver name..............: QL2300.HAM
Assigned driver ID.......: 1431
Adapter number...........: 4
Primary port address.....: Not used
Primary port length......: Not used
Secondary port address...: Not used
Secondary port length....: Not used
Interrupt 0..............: 5
Interrupt 1..............: Not used
Slot.....................: 2
DMA0.....................: Not used
DMA1.....................: Not used
Memory 0 address.........: 0000
Memory 0 length..........: 0010
Memory 1 address.........: Not used
Memory 1 length..........: Not used

[V597-A4-D1:0] COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
Media manager object ID.....: 0x0013
Media manager Object Type...: Device
Device type.................: Unknown
Capacity....................: 0 MB
Unit Size, in bytes.........: 0
Sectors.....................: 0
Heads.......................: 0
Cylinders...................: 0
Block size, in bytes........: 0
Activated...................: No
Registered..................: Yes
Functional..................: Yes
Writable....................: Yes
Write protected.............: No
Reserved....................: No
Removable...................: No
Read Handicap...............: No
Offline.....................: No
Controller Number...........: 1
Device Number...............: 0
Adapter Number..............: 4
System Type.................: 0x90000
Read after write verify.....: Disabled

[V597-A4-D0:0] COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
Media manager object ID.....: 0x0012
Media manager Object Type...: Device
Device type.................: Unknown
Capacity....................: 0 MB
Unit Size, in bytes.........: 0
Sectors.....................: 0
Heads.......................: 0
Cylinders...................: 0
Block size, in bytes........: 0
Activated...................: No
Registered..................: Yes
Functional..................: Yes
Writable....................: Yes
Write protected.............: No
Reserved....................: No
Removable...................: No
Read Handicap...............: No
Offline.....................: No
Controller Number...........: 0
Device Number...............: 0
Adapter Number..............: 4
System Type.................: 0x90000
Read after write verify.....: Disabled

Gildas

> how, and what do you connect to te adapter? is a FC switch involved?
> in the logger screen, what ouput is displayed when ql2300 loads?
>
>
> > On Netware 6.5 SP3, QL2300 detect LUN as Unknown Device Type and not as

> HDD.
> >
> > list devices command show:
> > list devices
> > 0x0001: [V024-A0-D1:0] Legacy Floppy [FLOPPY]
> >
> > 0x000A: [V504-A2-D0:0] HP Smart Array 6i Slot 0 ID 0 LUN 0 [HDD]
> >
> > 0x0010: [V025-A1-D0:0] TEAC DV-28E-N C.6B [CD]
> >
> > 0x0012: [V597-A4-D0:0] COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
> >
> > 0x0013: [V597-A4-D1:0] COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
> >
> > 0x0015: [V597-A5-D0:0] COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
> >
> > 0x0016: [V597-A5-D1:0] COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
> >
> > From NoRM, we see for 1 Storage Adapter:
> > QL2300 PCI FC Host Adapter Module Slot: 2
> > Device Name: COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
> > Device Type: Unknown
> > Capacity: 0 MB
> > TID: 1
> > LUN: 0
> > Object ID: 13h
> >
> > Device Name: COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
> > Device Type: Unknown
> > Capacity: 0 MB
> > TID: 0
> > LUN: 0
> > Object ID: 12h
> >
> >
> > From NSSMU or iManager i cannot see HDD.
> > What are specifications to see correctly LUN?
> >
> > Best regards,
> >
> > Gildas BOMPOIL
> > System Engineer
> > Software Spectrum
> > gildas.bompoil@softwarespectrum.com
> >
> > details:
> > Server HP DL380 G4
> > Bios Firmware : P51 06/02/2005
> > HBA1: QLogic PCI Fibre Channel NetWare Driver
> > QLogic Name QLA2340 (HP Name FCA2214)
> > Files : QL2300.HAM, QL2300.DDI
> > Version : 6.80f (6.80.06)
> > Firmware : 1.45
> > Slot : 2
> > HBA2: QLogic PCI Fibre Channel NetWare Driver
> > QLogic Name QLA2340 HP Name FCA2214
> > Files : QL2300.HAM, QL2300.DDI
> > Version : 6.80f (6.80.06)
> > Firmware : 1.45
> > Slot : 3
> >
> > SAN HP StorageWorks MA8000
> > HSG80 : ACS 8.7 f1
> > LUN: 438 Go (146x4 RAID5)
> >
> > OS NetWare 6.5 SP3
> > QL2300.HAM : 6.80f (6.80.06)
> > CPQSHD.CDM: 2.04 (4 Apr 2005)
> >
> > HP Secure Path 3.0C SP 2.1
> > HPQSP.CDM: 0.11.25
> >
> > Startup.ncf:
> > LOAD ACPIDRV.PSM
> > ######## End PSM Drivers ########
> > LOAD CPQSHD.CDM
> > LOAD IDECD.CDM
> > ######## End CDM Drivers ########
> > LOAD IDEATA.HAM SLOT=10011
> > LOAD CPQRAID.HAM SLOT=10019
> > #LOAD QL2300.HAM SLOT=2 /LUNS
> > #LOAD QL2300.HAM SLOT=3 /LUNS
> > # Modified by Compaq SecurePath installation program SP30C SP2.1
> > load HPQSP.CDM
> > load QL2300.HAM /luns /allpaths /portnames SLOT=2
> > load QL2300.HAM /luns /allpaths /portnames SLOT=3
> > ######## End HAM Drivers ########
> > LOAD KEYB.NLM France
> > LOAD CHARSET.NLM CP850
> >
> >

>
>


0 Likes
Anonymous_User Absent Member.
Absent Member.

Re: QL2300.HAM detect LUN as Unknown Device Type

On our MSA1000 we use 'Storage Presentation Mask' that allows access to the
SAN resources by HBAs.
Are your HBAs selected to access a LUN? Does HSG80 have something similar?

Our startup.ncf looks like this:
LOAD QL2300.HAM SLOT=5 /LUNS /ALLPATHS /PORTNAMES=2

Good luck,
Graham
<gildas.bompoil@softwarespectrum.com> wrote in message
news:B7%Oe.1005$w73.889@prv-forum2.provo.novell.com...
> FCA2214 are connected to HP SAN StorageWorks FC switch 4/32 who are
> connected to HSG80.
>
> On HP SAN MA8000, we see the connection of FCA2214 on HSG80.
>
> log:
> Loading module QL2300.HAM
>
> QLogic QL2300 HAM Driver
>
> Version 6.80.06 15 July 2004
>
> Copyright 1995-2004 QLogic Corporation. All rights reserved.
>
> QL2300.HAM: QLA2312 Adapter 0 Memory Address 0x4985D000 IRQ 5
>
> QL2300.HAM: Reading configuration from memory (0 bytes)
>
> QL2300.HAM: Slot 2 loading instance 0
>
> QL2300.HAM: Maximum luns per id 128
>
> QL2300.HAM: Maximum ids 255
>
> QL2300.HAM: Login retry count 0
>
> QL2300.HAM: Link down timeout period 8s
>
> QL2300.HAM: Port down timeout period 16s
>
> QL2300.HAM: Failback delay period 12s
>
> QL2300.HAM: Reporting all adapter paths (path failover disabled)
>
> QL2300.HAM: Reporting all device ports (port failover disabled)
>
> QL2300.HAM: FC-Tape protocol enabled
>
> Loading module ACPICMGR.NLM
>
> QL2300.HAM: PCI function 0
>
> Module QL2300.HAM load status OK
>
> Loading module QL2300.HAM
>
> QL2300.HAM: QLA2312 Adapter 1 Memory Address 0x4985E000 IRQ 5
>
> QL2300.HAM: Reading configuration from memory (0 bytes)
>
> QL2300.HAM: Slot 3 loading instance 1
>
> QL2300.HAM: Maximum luns per id 128
>
> QL2300.HAM: Maximum ids 255
>
> QL2300.HAM: Login retry count 0
>
> QL2300.HAM: Link down timeout period 8s
>
> QL2300.HAM: Port down timeout period 16s
>
> QL2300.HAM: Failback delay period 12s
>
> QL2300.HAM: Reporting all adapter paths (path failover disabled)
>
> QL2300.HAM: Reporting all device ports (port failover disabled)
>
> QL2300.HAM: FC-Tape protocol enabled
>
> QL2300.HAM: PCI function 0
>
> Previously loaded module was used re-entrantly
>
> Module QL2300.HAM load status OK
>
> i also tested:
> - load LOAD QL2300.HAM SLOT=2 /LUNS /MAXLUNS=256
> - LOAD QL2300.HAM SLOT=2 /LUNS /INQUIRY
> - LOAD QL2300.HAM SLOT=2 /LUNS /STARTUNIT
> - LOAD QL2300.HAM SLOT=2 /LUNS /QUALIFIED
> - LOAD QL2300.HAM SLOT=2 /ALLPATHS /LUNZERO
>
> part of Config.txt:
> Storage Device Summary:
> 0x0000 [V024-A0] Legacy FLOPPY Controller
> 0x0001 [V024-A0-D1:0] Legacy Floppy
> 0x0002 [V100-A100] USB UHCI Controller
> 0x0003 [V100-A101] USB UHCI Controller
> 0x0004 [V100-A102] USB UHCI Controller
> 0x0005 [V100-A103] USB UHCI Controller
> 0x0006 [V100-A104] USB EHCI Controller
> 0x0007 [V025-A1] Novell ATA/IDE Host Adapter Module
> 0x0010 [V025-A1-D0:0] TEAC DV-28E-N C.6B
> 0x0008 [V504-A2] HP Unified RAID Driver
> 0x000A [V504-A2-D0:0] HP Smart Array 6i Slot 0 ID 0 LUN 0
> 0x000B DOS Partitioned Media
> 0x000F [V504-A2-D0:0-P53FF] Free Partition Space
> 0x000C [V504-A2-D0:0-P0] Big DOS; OS/2; Win95 Partition
> 0x000D [V504-A2-D0:0-P1F6] NSS Partition
> 0x000E [V504-A2-D0:0-P53FE] Free Partition Space
> 0x0009 [V7C1-A3] HP Virtual Host Adapter Module
> 0x0011 [V597-A4] QL2300 PCI FC Host Adapter Module
> 0x0013 [V597-A4-D1:0] COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
> 0x0012 [V597-A4-D0:0] COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
> 0x0014 [V597-A5] QL2300 PCI FC Host Adapter Module
> 0x0016 [V597-A5-D1:0] COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
> 0x0015 [V597-A5-D0:0] COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
>
> Storage Device Details:
> [V597-A4] QL2300 PCI FC Host Adapter Module
> Media Manager object ID..: 0x0011
> Media Manager Object Type: Adapter
> Driver name..............: QL2300.HAM
> Assigned driver ID.......: 1431
> Adapter number...........: 4
> Primary port address.....: Not used
> Primary port length......: Not used
> Secondary port address...: Not used
> Secondary port length....: Not used
> Interrupt 0..............: 5
> Interrupt 1..............: Not used
> Slot.....................: 2
> DMA0.....................: Not used
> DMA1.....................: Not used
> Memory 0 address.........: 0000
> Memory 0 length..........: 0010
> Memory 1 address.........: Not used
> Memory 1 length..........: Not used
>
> [V597-A4-D1:0] COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
> Media manager object ID.....: 0x0013
> Media manager Object Type...: Device
> Device type.................: Unknown
> Capacity....................: 0 MB
> Unit Size, in bytes.........: 0
> Sectors.....................: 0
> Heads.......................: 0
> Cylinders...................: 0
> Block size, in bytes........: 0
> Activated...................: No
> Registered..................: Yes
> Functional..................: Yes
> Writable....................: Yes
> Write protected.............: No
> Reserved....................: No
> Removable...................: No
> Read Handicap...............: No
> Offline.....................: No
> Controller Number...........: 1
> Device Number...............: 0
> Adapter Number..............: 4
> System Type.................: 0x90000
> Read after write verify.....: Disabled
>
> [V597-A4-D0:0] COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
> Media manager object ID.....: 0x0012
> Media manager Object Type...: Device
> Device type.................: Unknown
> Capacity....................: 0 MB
> Unit Size, in bytes.........: 0
> Sectors.....................: 0
> Heads.......................: 0
> Cylinders...................: 0
> Block size, in bytes........: 0
> Activated...................: No
> Registered..................: Yes
> Functional..................: Yes
> Writable....................: Yes
> Write protected.............: No
> Reserved....................: No
> Removable...................: No
> Read Handicap...............: No
> Offline.....................: No
> Controller Number...........: 0
> Device Number...............: 0
> Adapter Number..............: 4
> System Type.................: 0x90000
> Read after write verify.....: Disabled
>
> Gildas
>
>> how, and what do you connect to te adapter? is a FC switch involved?
>> in the logger screen, what ouput is displayed when ql2300 loads?
>>
>>
>> > On Netware 6.5 SP3, QL2300 detect LUN as Unknown Device Type and not as

>> HDD.
>> >
>> > list devices command show:
>> > list devices
>> > 0x0001: [V024-A0-D1:0] Legacy Floppy [FLOPPY]
>> >
>> > 0x000A: [V504-A2-D0:0] HP Smart Array 6i Slot 0 ID 0 LUN 0 [HDD]
>> >
>> > 0x0010: [V025-A1-D0:0] TEAC DV-28E-N C.6B [CD]
>> >
>> > 0x0012: [V597-A4-D0:0] COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
>> >
>> > 0x0013: [V597-A4-D1:0] COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
>> >
>> > 0x0015: [V597-A5-D0:0] COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
>> >
>> > 0x0016: [V597-A5-D1:0] COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
>> >
>> > From NoRM, we see for 1 Storage Adapter:
>> > QL2300 PCI FC Host Adapter Module Slot: 2
>> > Device Name: COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
>> > Device Type: Unknown
>> > Capacity: 0 MB
>> > TID: 1
>> > LUN: 0
>> > Object ID: 13h
>> >
>> > Device Name: COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
>> > Device Type: Unknown
>> > Capacity: 0 MB
>> > TID: 0
>> > LUN: 0
>> > Object ID: 12h
>> >
>> >
>> > From NSSMU or iManager i cannot see HDD.
>> > What are specifications to see correctly LUN?
>> >
>> > Best regards,
>> >
>> > Gildas BOMPOIL
>> > System Engineer
>> > Software Spectrum
>> > gildas.bompoil@softwarespectrum.com
>> >
>> > details:
>> > Server HP DL380 G4
>> > Bios Firmware : P51 06/02/2005
>> > HBA1: QLogic PCI Fibre Channel NetWare Driver
>> > QLogic Name QLA2340 (HP Name FCA2214)
>> > Files : QL2300.HAM, QL2300.DDI
>> > Version : 6.80f (6.80.06)
>> > Firmware : 1.45
>> > Slot : 2
>> > HBA2: QLogic PCI Fibre Channel NetWare Driver
>> > QLogic Name QLA2340 HP Name FCA2214
>> > Files : QL2300.HAM, QL2300.DDI
>> > Version : 6.80f (6.80.06)
>> > Firmware : 1.45
>> > Slot : 3
>> >
>> > SAN HP StorageWorks MA8000
>> > HSG80 : ACS 8.7 f1
>> > LUN: 438 Go (146x4 RAID5)
>> >
>> > OS NetWare 6.5 SP3
>> > QL2300.HAM : 6.80f (6.80.06)
>> > CPQSHD.CDM: 2.04 (4 Apr 2005)
>> >
>> > HP Secure Path 3.0C SP 2.1
>> > HPQSP.CDM: 0.11.25
>> >
>> > Startup.ncf:
>> > LOAD ACPIDRV.PSM
>> > ######## End PSM Drivers ########
>> > LOAD CPQSHD.CDM
>> > LOAD IDECD.CDM
>> > ######## End CDM Drivers ########
>> > LOAD IDEATA.HAM SLOT=10011
>> > LOAD CPQRAID.HAM SLOT=10019
>> > #LOAD QL2300.HAM SLOT=2 /LUNS
>> > #LOAD QL2300.HAM SLOT=3 /LUNS
>> > # Modified by Compaq SecurePath installation program SP30C SP2.1
>> > load HPQSP.CDM
>> > load QL2300.HAM /luns /allpaths /portnames SLOT=2
>> > load QL2300.HAM /luns /allpaths /portnames SLOT=3
>> > ######## End HAM Drivers ########
>> > LOAD KEYB.NLM France
>> > LOAD CHARSET.NLM CP850
>> >
>> >

>>
>>

>



0 Likes
Anonymous_User Absent Member.
Absent Member.

Re: QL2300.HAM detect LUN as Unknown Device Type

Sorry, typo. Should be:

LOAD QL2300.HAM SLOT=5 /LUNS /ALLPATHS /PORTNAMES /PORTDOWN=2

Graham
"Graham Prentice" <gprentice_@_oakville.ca> wrote in message
news:wB4Pe.1408$w73.398@prv-forum2.provo.novell.com...
> On our MSA1000 we use 'Storage Presentation Mask' that allows access to
> the SAN resources by HBAs.
> Are your HBAs selected to access a LUN? Does HSG80 have something
> similar?
>
> Our startup.ncf looks like this:
> LOAD QL2300.HAM SLOT=5 /LUNS /ALLPATHS /PORTNAMES=2
>
> Good luck,
> Graham
> <gildas.bompoil@softwarespectrum.com> wrote in message
> news:B7%Oe.1005$w73.889@prv-forum2.provo.novell.com...
>> FCA2214 are connected to HP SAN StorageWorks FC switch 4/32 who are
>> connected to HSG80.
>>
>> On HP SAN MA8000, we see the connection of FCA2214 on HSG80.
>>
>> log:
>> Loading module QL2300.HAM
>>
>> QLogic QL2300 HAM Driver
>>
>> Version 6.80.06 15 July 2004
>>
>> Copyright 1995-2004 QLogic Corporation. All rights reserved.
>>
>> QL2300.HAM: QLA2312 Adapter 0 Memory Address 0x4985D000 IRQ 5
>>
>> QL2300.HAM: Reading configuration from memory (0 bytes)
>>
>> QL2300.HAM: Slot 2 loading instance 0
>>
>> QL2300.HAM: Maximum luns per id 128
>>
>> QL2300.HAM: Maximum ids 255
>>
>> QL2300.HAM: Login retry count 0
>>
>> QL2300.HAM: Link down timeout period 8s
>>
>> QL2300.HAM: Port down timeout period 16s
>>
>> QL2300.HAM: Failback delay period 12s
>>
>> QL2300.HAM: Reporting all adapter paths (path failover disabled)
>>
>> QL2300.HAM: Reporting all device ports (port failover disabled)
>>
>> QL2300.HAM: FC-Tape protocol enabled
>>
>> Loading module ACPICMGR.NLM
>>
>> QL2300.HAM: PCI function 0
>>
>> Module QL2300.HAM load status OK
>>
>> Loading module QL2300.HAM
>>
>> QL2300.HAM: QLA2312 Adapter 1 Memory Address 0x4985E000 IRQ 5
>>
>> QL2300.HAM: Reading configuration from memory (0 bytes)
>>
>> QL2300.HAM: Slot 3 loading instance 1
>>
>> QL2300.HAM: Maximum luns per id 128
>>
>> QL2300.HAM: Maximum ids 255
>>
>> QL2300.HAM: Login retry count 0
>>
>> QL2300.HAM: Link down timeout period 8s
>>
>> QL2300.HAM: Port down timeout period 16s
>>
>> QL2300.HAM: Failback delay period 12s
>>
>> QL2300.HAM: Reporting all adapter paths (path failover disabled)
>>
>> QL2300.HAM: Reporting all device ports (port failover disabled)
>>
>> QL2300.HAM: FC-Tape protocol enabled
>>
>> QL2300.HAM: PCI function 0
>>
>> Previously loaded module was used re-entrantly
>>
>> Module QL2300.HAM load status OK
>>
>> i also tested:
>> - load LOAD QL2300.HAM SLOT=2 /LUNS /MAXLUNS=256
>> - LOAD QL2300.HAM SLOT=2 /LUNS /INQUIRY
>> - LOAD QL2300.HAM SLOT=2 /LUNS /STARTUNIT
>> - LOAD QL2300.HAM SLOT=2 /LUNS /QUALIFIED
>> - LOAD QL2300.HAM SLOT=2 /ALLPATHS /LUNZERO
>>
>> part of Config.txt:
>> Storage Device Summary:
>> 0x0000 [V024-A0] Legacy FLOPPY Controller
>> 0x0001 [V024-A0-D1:0] Legacy Floppy
>> 0x0002 [V100-A100] USB UHCI Controller
>> 0x0003 [V100-A101] USB UHCI Controller
>> 0x0004 [V100-A102] USB UHCI Controller
>> 0x0005 [V100-A103] USB UHCI Controller
>> 0x0006 [V100-A104] USB EHCI Controller
>> 0x0007 [V025-A1] Novell ATA/IDE Host Adapter Module
>> 0x0010 [V025-A1-D0:0] TEAC DV-28E-N C.6B
>> 0x0008 [V504-A2] HP Unified RAID Driver
>> 0x000A [V504-A2-D0:0] HP Smart Array 6i Slot 0 ID 0 LUN 0
>> 0x000B DOS Partitioned Media
>> 0x000F [V504-A2-D0:0-P53FF] Free Partition Space
>> 0x000C [V504-A2-D0:0-P0] Big DOS; OS/2; Win95 Partition
>> 0x000D [V504-A2-D0:0-P1F6] NSS Partition
>> 0x000E [V504-A2-D0:0-P53FE] Free Partition Space
>> 0x0009 [V7C1-A3] HP Virtual Host Adapter Module
>> 0x0011 [V597-A4] QL2300 PCI FC Host Adapter Module
>> 0x0013 [V597-A4-D1:0] COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
>> 0x0012 [V597-A4-D0:0] COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
>> 0x0014 [V597-A5] QL2300 PCI FC Host Adapter Module
>> 0x0016 [V597-A5-D1:0] COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
>> 0x0015 [V597-A5-D0:0] COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
>>
>> Storage Device Details:
>> [V597-A4] QL2300 PCI FC Host Adapter Module
>> Media Manager object ID..: 0x0011
>> Media Manager Object Type: Adapter
>> Driver name..............: QL2300.HAM
>> Assigned driver ID.......: 1431
>> Adapter number...........: 4
>> Primary port address.....: Not used
>> Primary port length......: Not used
>> Secondary port address...: Not used
>> Secondary port length....: Not used
>> Interrupt 0..............: 5
>> Interrupt 1..............: Not used
>> Slot.....................: 2
>> DMA0.....................: Not used
>> DMA1.....................: Not used
>> Memory 0 address.........: 0000
>> Memory 0 length..........: 0010
>> Memory 1 address.........: Not used
>> Memory 1 length..........: Not used
>>
>> [V597-A4-D1:0] COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
>> Media manager object ID.....: 0x0013
>> Media manager Object Type...: Device
>> Device type.................: Unknown
>> Capacity....................: 0 MB
>> Unit Size, in bytes.........: 0
>> Sectors.....................: 0
>> Heads.......................: 0
>> Cylinders...................: 0
>> Block size, in bytes........: 0
>> Activated...................: No
>> Registered..................: Yes
>> Functional..................: Yes
>> Writable....................: Yes
>> Write protected.............: No
>> Reserved....................: No
>> Removable...................: No
>> Read Handicap...............: No
>> Offline.....................: No
>> Controller Number...........: 1
>> Device Number...............: 0
>> Adapter Number..............: 4
>> System Type.................: 0x90000
>> Read after write verify.....: Disabled
>>
>> [V597-A4-D0:0] COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
>> Media manager object ID.....: 0x0012
>> Media manager Object Type...: Device
>> Device type.................: Unknown
>> Capacity....................: 0 MB
>> Unit Size, in bytes.........: 0
>> Sectors.....................: 0
>> Heads.......................: 0
>> Cylinders...................: 0
>> Block size, in bytes........: 0
>> Activated...................: No
>> Registered..................: Yes
>> Functional..................: Yes
>> Writable....................: Yes
>> Write protected.............: No
>> Reserved....................: No
>> Removable...................: No
>> Read Handicap...............: No
>> Offline.....................: No
>> Controller Number...........: 0
>> Device Number...............: 0
>> Adapter Number..............: 4
>> System Type.................: 0x90000
>> Read after write verify.....: Disabled
>>
>> Gildas
>>
>>> how, and what do you connect to te adapter? is a FC switch involved?
>>> in the logger screen, what ouput is displayed when ql2300 loads?
>>>
>>>
>>> > On Netware 6.5 SP3, QL2300 detect LUN as Unknown Device Type and not
>>> > as
>>> HDD.
>>> >
>>> > list devices command show:
>>> > list devices
>>> > 0x0001: [V024-A0-D1:0] Legacy Floppy [FLOPPY]
>>> >
>>> > 0x000A: [V504-A2-D0:0] HP Smart Array 6i Slot 0 ID 0 LUN 0 [HDD]
>>> >
>>> > 0x0010: [V025-A1-D0:0] TEAC DV-28E-N C.6B [CD]
>>> >
>>> > 0x0012: [V597-A4-D0:0] COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
>>> >
>>> > 0x0013: [V597-A4-D1:0] COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
>>> >
>>> > 0x0015: [V597-A5-D0:0] COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
>>> >
>>> > 0x0016: [V597-A5-D1:0] COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
>>> >
>>> > From NoRM, we see for 1 Storage Adapter:
>>> > QL2300 PCI FC Host Adapter Module Slot: 2
>>> > Device Name: COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
>>> > Device Type: Unknown
>>> > Capacity: 0 MB
>>> > TID: 1
>>> > LUN: 0
>>> > Object ID: 13h
>>> >
>>> > Device Name: COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
>>> > Device Type: Unknown
>>> > Capacity: 0 MB
>>> > TID: 0
>>> > LUN: 0
>>> > Object ID: 12h
>>> >
>>> >
>>> > From NSSMU or iManager i cannot see HDD.
>>> > What are specifications to see correctly LUN?
>>> >
>>> > Best regards,
>>> >
>>> > Gildas BOMPOIL
>>> > System Engineer
>>> > Software Spectrum
>>> > gildas.bompoil@softwarespectrum.com
>>> >
>>> > details:
>>> > Server HP DL380 G4
>>> > Bios Firmware : P51 06/02/2005
>>> > HBA1: QLogic PCI Fibre Channel NetWare Driver
>>> > QLogic Name QLA2340 (HP Name FCA2214)
>>> > Files : QL2300.HAM, QL2300.DDI
>>> > Version : 6.80f (6.80.06)
>>> > Firmware : 1.45
>>> > Slot : 2
>>> > HBA2: QLogic PCI Fibre Channel NetWare Driver
>>> > QLogic Name QLA2340 HP Name FCA2214
>>> > Files : QL2300.HAM, QL2300.DDI
>>> > Version : 6.80f (6.80.06)
>>> > Firmware : 1.45
>>> > Slot : 3
>>> >
>>> > SAN HP StorageWorks MA8000
>>> > HSG80 : ACS 8.7 f1
>>> > LUN: 438 Go (146x4 RAID5)
>>> >
>>> > OS NetWare 6.5 SP3
>>> > QL2300.HAM : 6.80f (6.80.06)
>>> > CPQSHD.CDM: 2.04 (4 Apr 2005)
>>> >
>>> > HP Secure Path 3.0C SP 2.1
>>> > HPQSP.CDM: 0.11.25
>>> >
>>> > Startup.ncf:
>>> > LOAD ACPIDRV.PSM
>>> > ######## End PSM Drivers ########
>>> > LOAD CPQSHD.CDM
>>> > LOAD IDECD.CDM
>>> > ######## End CDM Drivers ########
>>> > LOAD IDEATA.HAM SLOT=10011
>>> > LOAD CPQRAID.HAM SLOT=10019
>>> > #LOAD QL2300.HAM SLOT=2 /LUNS
>>> > #LOAD QL2300.HAM SLOT=3 /LUNS
>>> > # Modified by Compaq SecurePath installation program SP30C SP2.1
>>> > load HPQSP.CDM
>>> > load QL2300.HAM /luns /allpaths /portnames SLOT=2
>>> > load QL2300.HAM /luns /allpaths /portnames SLOT=3
>>> > ######## End HAM Drivers ########
>>> > LOAD KEYB.NLM France
>>> > LOAD CHARSET.NLM CP850
>>> >
>>> >
>>>
>>>

>>

>
>



0 Likes
Anonymous_User Absent Member.
Absent Member.

Re: QL2300.HAM detect LUN as Unknown Device Type

Use the CFG.NLM that is in the UNSUPDRV directory (usually
C:\NWSERVER\DRIVERS\UNSUPDRV).

CFG /LI - this will do a SCSI INQUIRY. If the third and fouth column are 00
00 -- it's responding as a hard drive.

What do your devices respond with?

Darin.

<gildas.bompoil@softwarespectrum.com> wrote in message
news:sUYOe.863$w73.284@prv-forum2.provo.novell.com...
> On Netware 6.5 SP3, QL2300 detect LUN as Unknown Device Type and not as
> HDD.
>
> list devices command show:
> list devices
> 0x0001: [V024-A0-D1:0] Legacy Floppy [FLOPPY]
>
> 0x000A: [V504-A2-D0:0] HP Smart Array 6i Slot 0 ID 0 LUN 0 [HDD]
>
> 0x0010: [V025-A1-D0:0] TEAC DV-28E-N C.6B [CD]
>
> 0x0012: [V597-A4-D0:0] COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
>
> 0x0013: [V597-A4-D1:0] COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
>
> 0x0015: [V597-A5-D0:0] COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
>
> 0x0016: [V597-A5-D1:0] COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
>
> From NoRM, we see for 1 Storage Adapter:
> QL2300 PCI FC Host Adapter Module Slot: 2
> Device Name: COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
> Device Type: Unknown
> Capacity: 0 MB
> TID: 1
> LUN: 0
> Object ID: 13h
>
> Device Name: COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
> Device Type: Unknown
> Capacity: 0 MB
> TID: 0
> LUN: 0
> Object ID: 12h
>
>
> From NSSMU or iManager i cannot see HDD.
> What are specifications to see correctly LUN?
>
> Best regards,
>
> Gildas BOMPOIL
> System Engineer
> Software Spectrum
> gildas.bompoil@softwarespectrum.com
>
> details:
> Server HP DL380 G4
> Bios Firmware : P51 06/02/2005
> HBA1: QLogic PCI Fibre Channel NetWare Driver
> QLogic Name QLA2340 (HP Name FCA2214)
> Files : QL2300.HAM, QL2300.DDI
> Version : 6.80f (6.80.06)
> Firmware : 1.45
> Slot : 2
> HBA2: QLogic PCI Fibre Channel NetWare Driver
> QLogic Name QLA2340 HP Name FCA2214
> Files : QL2300.HAM, QL2300.DDI
> Version : 6.80f (6.80.06)
> Firmware : 1.45
> Slot : 3
>
> SAN HP StorageWorks MA8000
> HSG80 : ACS 8.7 f1
> LUN: 438 Go (146x4 RAID5)
>
> OS NetWare 6.5 SP3
> QL2300.HAM : 6.80f (6.80.06)
> CPQSHD.CDM: 2.04 (4 Apr 2005)
>
> HP Secure Path 3.0C SP 2.1
> HPQSP.CDM: 0.11.25
>
> Startup.ncf:
> LOAD ACPIDRV.PSM
> ######## End PSM Drivers ########
> LOAD CPQSHD.CDM
> LOAD IDECD.CDM
> ######## End CDM Drivers ########
> LOAD IDEATA.HAM SLOT=10011
> LOAD CPQRAID.HAM SLOT=10019
> #LOAD QL2300.HAM SLOT=2 /LUNS
> #LOAD QL2300.HAM SLOT=3 /LUNS
> # Modified by Compaq SecurePath installation program SP30C SP2.1
> load HPQSP.CDM
> load QL2300.HAM /luns /allpaths /portnames SLOT=2
> load QL2300.HAM /luns /allpaths /portnames SLOT=3
> ######## End HAM Drivers ########
> LOAD KEYB.NLM France
> LOAD CHARSET.NLM CP850
>
>



0 Likes
Anonymous_User Absent Member.
Absent Member.

Re: QL2300.HAM detect LUN as Unknown Device Type

connection seems to be OK, but you should verify the bios settings of the FC
card according to the manual of the HSG80. especially speed and point to
point / loop.

how do you configure multipath support? QL support is disabled in the bios
and /or startup.ncf as i can see, and hpqsp deals with it. but you should
also disable it in netware. 'set multi-path support = off' is not in
startup.ncf as the top line. if it is in the registry, you could also
specify it in startup.ncf as a precaution, just to be sure.

I have read a statement from IBM and HP/Compaq jointly to NOT use cpqshd.cdm
in cases where san's with multi-path support are involved. there seems to be
code in cpqshd conflicting with the failover mechanisms. use netware's
scsihd.cdm instead.

did you create storage allocated to the QL adapter in the HSG80?

> FCA2214 are connected to HP SAN StorageWorks FC switch 4/32 who are
> connected to HSG80.
>
> On HP SAN MA8000, we see the connection of FCA2214 on HSG80.
>
> log:
> Loading module QL2300.HAM
>
> QLogic QL2300 HAM Driver
>
> Version 6.80.06 15 July 2004
>
> Copyright 1995-2004 QLogic Corporation. All rights reserved.
>
> QL2300.HAM: QLA2312 Adapter 0 Memory Address 0x4985D000 IRQ 5
>
> QL2300.HAM: Reading configuration from memory (0 bytes)
>
> QL2300.HAM: Slot 2 loading instance 0
>
> QL2300.HAM: Maximum luns per id 128
>
> QL2300.HAM: Maximum ids 255
>
> QL2300.HAM: Login retry count 0
>
> QL2300.HAM: Link down timeout period 8s
>
> QL2300.HAM: Port down timeout period 16s
>
> QL2300.HAM: Failback delay period 12s
>
> QL2300.HAM: Reporting all adapter paths (path failover disabled)
>
> QL2300.HAM: Reporting all device ports (port failover disabled)
>
> QL2300.HAM: FC-Tape protocol enabled
>
> Loading module ACPICMGR.NLM
>
> QL2300.HAM: PCI function 0
>
> Module QL2300.HAM load status OK
>
> Loading module QL2300.HAM
>
> QL2300.HAM: QLA2312 Adapter 1 Memory Address 0x4985E000 IRQ 5
>
> QL2300.HAM: Reading configuration from memory (0 bytes)
>
> QL2300.HAM: Slot 3 loading instance 1
>
> QL2300.HAM: Maximum luns per id 128
>
> QL2300.HAM: Maximum ids 255
>
> QL2300.HAM: Login retry count 0
>
> QL2300.HAM: Link down timeout period 8s
>
> QL2300.HAM: Port down timeout period 16s
>
> QL2300.HAM: Failback delay period 12s
>
> QL2300.HAM: Reporting all adapter paths (path failover disabled)
>
> QL2300.HAM: Reporting all device ports (port failover disabled)
>
> QL2300.HAM: FC-Tape protocol enabled
>
> QL2300.HAM: PCI function 0
>
> Previously loaded module was used re-entrantly
>
> Module QL2300.HAM load status OK
>
> i also tested:
> - load LOAD QL2300.HAM SLOT=2 /LUNS /MAXLUNS=256
> - LOAD QL2300.HAM SLOT=2 /LUNS /INQUIRY
> - LOAD QL2300.HAM SLOT=2 /LUNS /STARTUNIT
> - LOAD QL2300.HAM SLOT=2 /LUNS /QUALIFIED
> - LOAD QL2300.HAM SLOT=2 /ALLPATHS /LUNZERO
>
> part of Config.txt:
> Storage Device Summary:
> 0x0000 [V024-A0] Legacy FLOPPY Controller
> 0x0001 [V024-A0-D1:0] Legacy Floppy
> 0x0002 [V100-A100] USB UHCI Controller
> 0x0003 [V100-A101] USB UHCI Controller
> 0x0004 [V100-A102] USB UHCI Controller
> 0x0005 [V100-A103] USB UHCI Controller
> 0x0006 [V100-A104] USB EHCI Controller
> 0x0007 [V025-A1] Novell ATA/IDE Host Adapter Module
> 0x0010 [V025-A1-D0:0] TEAC DV-28E-N C.6B
> 0x0008 [V504-A2] HP Unified RAID Driver
> 0x000A [V504-A2-D0:0] HP Smart Array 6i Slot 0 ID 0 LUN 0
> 0x000B DOS Partitioned Media
> 0x000F [V504-A2-D0:0-P53FF] Free Partition Space
> 0x000C [V504-A2-D0:0-P0] Big DOS; OS/2; Win95 Partition
> 0x000D [V504-A2-D0:0-P1F6] NSS Partition
> 0x000E [V504-A2-D0:0-P53FE] Free Partition Space
> 0x0009 [V7C1-A3] HP Virtual Host Adapter Module
> 0x0011 [V597-A4] QL2300 PCI FC Host Adapter Module
> 0x0013 [V597-A4-D1:0] COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
> 0x0012 [V597-A4-D0:0] COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
> 0x0014 [V597-A5] QL2300 PCI FC Host Adapter Module
> 0x0016 [V597-A5-D1:0] COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
> 0x0015 [V597-A5-D0:0] COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
>
> Storage Device Details:
> [V597-A4] QL2300 PCI FC Host Adapter Module
> Media Manager object ID..: 0x0011
> Media Manager Object Type: Adapter
> Driver name..............: QL2300.HAM
> Assigned driver ID.......: 1431
> Adapter number...........: 4
> Primary port address.....: Not used
> Primary port length......: Not used
> Secondary port address...: Not used
> Secondary port length....: Not used
> Interrupt 0..............: 5
> Interrupt 1..............: Not used
> Slot.....................: 2
> DMA0.....................: Not used
> DMA1.....................: Not used
> Memory 0 address.........: 0000
> Memory 0 length..........: 0010
> Memory 1 address.........: Not used
> Memory 1 length..........: Not used
>
> [V597-A4-D1:0] COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
> Media manager object ID.....: 0x0013
> Media manager Object Type...: Device
> Device type.................: Unknown
> Capacity....................: 0 MB
> Unit Size, in bytes.........: 0
> Sectors.....................: 0
> Heads.......................: 0
> Cylinders...................: 0
> Block size, in bytes........: 0
> Activated...................: No
> Registered..................: Yes
> Functional..................: Yes
> Writable....................: Yes
> Write protected.............: No
> Reserved....................: No
> Removable...................: No
> Read Handicap...............: No
> Offline.....................: No
> Controller Number...........: 1
> Device Number...............: 0
> Adapter Number..............: 4
> System Type.................: 0x90000
> Read after write verify.....: Disabled
>
> [V597-A4-D0:0] COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
> Media manager object ID.....: 0x0012
> Media manager Object Type...: Device
> Device type.................: Unknown
> Capacity....................: 0 MB
> Unit Size, in bytes.........: 0
> Sectors.....................: 0
> Heads.......................: 0
> Cylinders...................: 0
> Block size, in bytes........: 0
> Activated...................: No
> Registered..................: Yes
> Functional..................: Yes
> Writable....................: Yes
> Write protected.............: No
> Reserved....................: No
> Removable...................: No
> Read Handicap...............: No
> Offline.....................: No
> Controller Number...........: 0
> Device Number...............: 0
> Adapter Number..............: 4
> System Type.................: 0x90000
> Read after write verify.....: Disabled
>
> Gildas
>
> > how, and what do you connect to te adapter? is a FC switch involved?
> > in the logger screen, what ouput is displayed when ql2300 loads?
> >
> >
> > > On Netware 6.5 SP3, QL2300 detect LUN as Unknown Device Type and not

as
> > HDD.
> > >
> > > list devices command show:
> > > list devices
> > > 0x0001: [V024-A0-D1:0] Legacy Floppy [FLOPPY]
> > >
> > > 0x000A: [V504-A2-D0:0] HP Smart Array 6i Slot 0 ID 0 LUN 0 [HDD]
> > >
> > > 0x0010: [V025-A1-D0:0] TEAC DV-28E-N C.6B [CD]
> > >
> > > 0x0012: [V597-A4-D0:0] COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
> > >
> > > 0x0013: [V597-A4-D1:0] COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
> > >
> > > 0x0015: [V597-A5-D0:0] COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
> > >
> > > 0x0016: [V597-A5-D1:0] COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
> > >
> > > From NoRM, we see for 1 Storage Adapter:
> > > QL2300 PCI FC Host Adapter Module Slot: 2
> > > Device Name: COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
> > > Device Type: Unknown
> > > Capacity: 0 MB
> > > TID: 1
> > > LUN: 0
> > > Object ID: 13h
> > >
> > > Device Name: COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
> > > Device Type: Unknown
> > > Capacity: 0 MB
> > > TID: 0
> > > LUN: 0
> > > Object ID: 12h
> > >
> > >
> > > From NSSMU or iManager i cannot see HDD.
> > > What are specifications to see correctly LUN?
> > >
> > > Best regards,
> > >
> > > Gildas BOMPOIL
> > > System Engineer
> > > Software Spectrum
> > > gildas.bompoil@softwarespectrum.com
> > >
> > > details:
> > > Server HP DL380 G4
> > > Bios Firmware : P51 06/02/2005
> > > HBA1: QLogic PCI Fibre Channel NetWare Driver
> > > QLogic Name QLA2340 (HP Name FCA2214)
> > > Files : QL2300.HAM, QL2300.DDI
> > > Version : 6.80f (6.80.06)
> > > Firmware : 1.45
> > > Slot : 2
> > > HBA2: QLogic PCI Fibre Channel NetWare Driver
> > > QLogic Name QLA2340 HP Name FCA2214
> > > Files : QL2300.HAM, QL2300.DDI
> > > Version : 6.80f (6.80.06)
> > > Firmware : 1.45
> > > Slot : 3
> > >
> > > SAN HP StorageWorks MA8000
> > > HSG80 : ACS 8.7 f1
> > > LUN: 438 Go (146x4 RAID5)
> > >
> > > OS NetWare 6.5 SP3
> > > QL2300.HAM : 6.80f (6.80.06)
> > > CPQSHD.CDM: 2.04 (4 Apr 2005)
> > >
> > > HP Secure Path 3.0C SP 2.1
> > > HPQSP.CDM: 0.11.25
> > >
> > > Startup.ncf:
> > > LOAD ACPIDRV.PSM
> > > ######## End PSM Drivers ########
> > > LOAD CPQSHD.CDM
> > > LOAD IDECD.CDM
> > > ######## End CDM Drivers ########
> > > LOAD IDEATA.HAM SLOT=10011
> > > LOAD CPQRAID.HAM SLOT=10019
> > > #LOAD QL2300.HAM SLOT=2 /LUNS
> > > #LOAD QL2300.HAM SLOT=3 /LUNS
> > > # Modified by Compaq SecurePath installation program SP30C SP2.1
> > > load HPQSP.CDM
> > > load QL2300.HAM /luns /allpaths /portnames SLOT=2
> > > load QL2300.HAM /luns /allpaths /portnames SLOT=3
> > > ######## End HAM Drivers ########
> > > LOAD KEYB.NLM France
> > > LOAD CHARSET.NLM CP850
> > >
> > >

> >
> >

>



0 Likes
Anonymous_User Absent Member.
Absent Member.

Re: QL2300.HAM detect LUN as Unknown Device Type

CFG /LI show
0C 00
It's not a hard drive? it show Controlers?

details:
CFG.NLM (QL2x00 HAM Tool Version 2.01.06 7 June 2004)
A3: Inquiry...
A3-OO:00 AA000000 OC 00 DEC HSG80CCL V87F
A3-O1:00 AA000100 OC 00 DEC HSG80CCL V87F

A4: Inquiry...
A4-OO:00 AA010000 OC 00 DEC HSG80CCL V87F
A4-O1:00 AA010100 OC 00 DEC HSG80CCL V87F

Gildas

> Use the CFG.NLM that is in the UNSUPDRV directory (usually
> C:\NWSERVER\DRIVERS\UNSUPDRV).
>
> CFG /LI - this will do a SCSI INQUIRY. If the third and fouth column are 00
> 00 -- it's responding as a hard drive.
>
> What do your devices respond with?
>
> Darin.
>
> <gildas.bompoil@softwarespectrum.com> wrote in message
> news:sUYOe.863$w73.284@prv-forum2.provo.novell.com...
> > On Netware 6.5 SP3, QL2300 detect LUN as Unknown Device Type and not as
> > HDD.
> >
> > list devices command show:
> > list devices
> > 0x0001: [V024-A0-D1:0] Legacy Floppy [FLOPPY]
> >
> > 0x000A: [V504-A2-D0:0] HP Smart Array 6i Slot 0 ID 0 LUN 0 [HDD]
> >
> > 0x0010: [V025-A1-D0:0] TEAC DV-28E-N C.6B [CD]
> >
> > 0x0012: [V597-A4-D0:0] COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
> >
> > 0x0013: [V597-A4-D1:0] COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
> >
> > 0x0015: [V597-A5-D0:0] COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
> >
> > 0x0016: [V597-A5-D1:0] COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
> >
> > From NoRM, we see for 1 Storage Adapter:
> > QL2300 PCI FC Host Adapter Module Slot: 2
> > Device Name: COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
> > Device Type: Unknown
> > Capacity: 0 MB
> > TID: 1
> > LUN: 0
> > Object ID: 13h
> >
> > Device Name: COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
> > Device Type: Unknown
> > Capacity: 0 MB
> > TID: 0
> > LUN: 0
> > Object ID: 12h
> >
> >
> > From NSSMU or iManager i cannot see HDD.
> > What are specifications to see correctly LUN?
> >
> > Best regards,
> >
> > Gildas BOMPOIL
> > System Engineer
> > Software Spectrum
> > gildas.bompoil@softwarespectrum.com
> >
> > details:
> > Server HP DL380 G4
> > Bios Firmware : P51 06/02/2005
> > HBA1: QLogic PCI Fibre Channel NetWare Driver
> > QLogic Name QLA2340 (HP Name FCA2214)
> > Files : QL2300.HAM, QL2300.DDI
> > Version : 6.80f (6.80.06)
> > Firmware : 1.45
> > Slot : 2
> > HBA2: QLogic PCI Fibre Channel NetWare Driver
> > QLogic Name QLA2340 HP Name FCA2214
> > Files : QL2300.HAM, QL2300.DDI
> > Version : 6.80f (6.80.06)
> > Firmware : 1.45
> > Slot : 3
> >
> > SAN HP StorageWorks MA8000
> > HSG80 : ACS 8.7 f1
> > LUN: 438 Go (146x4 RAID5)
> >
> > OS NetWare 6.5 SP3
> > QL2300.HAM : 6.80f (6.80.06)
> > CPQSHD.CDM: 2.04 (4 Apr 2005)
> >
> > HP Secure Path 3.0C SP 2.1
> > HPQSP.CDM: 0.11.25
> >
> > Startup.ncf:
> > LOAD ACPIDRV.PSM
> > ######## End PSM Drivers ########
> > LOAD CPQSHD.CDM
> > LOAD IDECD.CDM
> > ######## End CDM Drivers ########
> > LOAD IDEATA.HAM SLOT=10011
> > LOAD CPQRAID.HAM SLOT=10019
> > #LOAD QL2300.HAM SLOT=2 /LUNS
> > #LOAD QL2300.HAM SLOT=3 /LUNS
> > # Modified by Compaq SecurePath installation program SP30C SP2.1
> > load HPQSP.CDM
> > load QL2300.HAM /luns /allpaths /portnames SLOT=2
> > load QL2300.HAM /luns /allpaths /portnames SLOT=3
> > ######## End HAM Drivers ########
> > LOAD KEYB.NLM France
> > LOAD CHARSET.NLM CP850
> >
> >

>
>


0 Likes
Anonymous_User Absent Member.
Absent Member.

Re: QL2300.HAM detect LUN as Unknown Device Type

Have you presented any LUN's to your Netware server?


Arjan

gildas.bompoil@softwarespectrum.com wrote:
> CFG /LI show
> 0C 00
> It's not a hard drive? it show Controlers?
>
> details:
> CFG.NLM (QL2x00 HAM Tool Version 2.01.06 7 June 2004)
> A3: Inquiry...
> A3-OO:00 AA000000 OC 00 DEC HSG80CCL V87F
> A3-O1:00 AA000100 OC 00 DEC HSG80CCL V87F
>
> A4: Inquiry...
> A4-OO:00 AA010000 OC 00 DEC HSG80CCL V87F
> A4-O1:00 AA010100 OC 00 DEC HSG80CCL V87F
>
> Gildas
>
>
>>Use the CFG.NLM that is in the UNSUPDRV directory (usually
>>C:\NWSERVER\DRIVERS\UNSUPDRV).
>>
>>CFG /LI - this will do a SCSI INQUIRY. If the third and fouth column are 00
>>00 -- it's responding as a hard drive.
>>
>>What do your devices respond with?
>>
>>Darin.
>>
>><gildas.bompoil@softwarespectrum.com> wrote in message
>>news:sUYOe.863$w73.284@prv-forum2.provo.novell.com...
>>
>>>On Netware 6.5 SP3, QL2300 detect LUN as Unknown Device Type and not as
>>>HDD.
>>>
>>>list devices command show:
>>>list devices
>>>0x0001: [V024-A0-D1:0] Legacy Floppy [FLOPPY]
>>>
>>>0x000A: [V504-A2-D0:0] HP Smart Array 6i Slot 0 ID 0 LUN 0 [HDD]
>>>
>>>0x0010: [V025-A1-D0:0] TEAC DV-28E-N C.6B [CD]
>>>
>>>0x0012: [V597-A4-D0:0] COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
>>>
>>>0x0013: [V597-A4-D1:0] COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
>>>
>>>0x0015: [V597-A5-D0:0] COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
>>>
>>>0x0016: [V597-A5-D1:0] COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
>>>
>>>From NoRM, we see for 1 Storage Adapter:
>>>QL2300 PCI FC Host Adapter Module Slot: 2
>>>Device Name: COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
>>>Device Type: Unknown
>>>Capacity: 0 MB
>>>TID: 1
>>>LUN: 0
>>>Object ID: 13h
>>>
>>>Device Name: COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
>>>Device Type: Unknown
>>>Capacity: 0 MB
>>>TID: 0
>>>LUN: 0
>>>Object ID: 12h
>>>
>>>
>>>From NSSMU or iManager i cannot see HDD.
>>>What are specifications to see correctly LUN?
>>>
>>>Best regards,
>>>
>>>Gildas BOMPOIL
>>>System Engineer
>>>Software Spectrum
>>>gildas.bompoil@softwarespectrum.com
>>>
>>>details:
>>>Server HP DL380 G4
>>> Bios Firmware : P51 06/02/2005
>>>HBA1: QLogic PCI Fibre Channel NetWare Driver
>>> QLogic Name QLA2340 (HP Name FCA2214)
>>> Files : QL2300.HAM, QL2300.DDI
>>> Version : 6.80f (6.80.06)
>>> Firmware : 1.45
>>> Slot : 2
>>>HBA2: QLogic PCI Fibre Channel NetWare Driver
>>> QLogic Name QLA2340 HP Name FCA2214
>>> Files : QL2300.HAM, QL2300.DDI
>>> Version : 6.80f (6.80.06)
>>> Firmware : 1.45
>>> Slot : 3
>>>
>>>SAN HP StorageWorks MA8000
>>>HSG80 : ACS 8.7 f1
>>>LUN: 438 Go (146x4 RAID5)
>>>
>>>OS NetWare 6.5 SP3
>>>QL2300.HAM : 6.80f (6.80.06)
>>> CPQSHD.CDM: 2.04 (4 Apr 2005)
>>>
>>> HP Secure Path 3.0C SP 2.1
>>> HPQSP.CDM: 0.11.25
>>>
>>>Startup.ncf:
>>>LOAD ACPIDRV.PSM
>>>######## End PSM Drivers ########
>>>LOAD CPQSHD.CDM
>>>LOAD IDECD.CDM
>>>######## End CDM Drivers ########
>>>LOAD IDEATA.HAM SLOT=10011
>>>LOAD CPQRAID.HAM SLOT=10019
>>>#LOAD QL2300.HAM SLOT=2 /LUNS
>>>#LOAD QL2300.HAM SLOT=3 /LUNS
>>># Modified by Compaq SecurePath installation program SP30C SP2.1
>>>load HPQSP.CDM
>>>load QL2300.HAM /luns /allpaths /portnames SLOT=2
>>>load QL2300.HAM /luns /allpaths /portnames SLOT=3
>>>######## End HAM Drivers ########
>>>LOAD KEYB.NLM France
>>>LOAD CHARSET.NLM CP850
>>>
>>>

>>
>>

>

0 Likes
Anonymous_User Absent Member.
Absent Member.

Re: QL2300.HAM detect LUN as Unknown Device Type

3 different LUNS was presented to our NetWare server. We tested at 2GB and
1GB. But QL2300 detected only HSG80 Controllers and none HDD.

In fact the first LUNS was created to id 0. LUNS has been recreated to id
+1 and now QL2300 detect LUNS.

HSG80 has been upgraded to ACS 8.7f7 to support 2GB and LUNS has been
recreated with upper id. Everything runs.

HSG80 will be upgraded to ACS 8.8.

I tested SCSIHD.CDM and CPQSHD.CDM and finally I load in startup.ncf:

LOAD CPQSHD.CDM –NONHPSAN
# (–NONHPSAN Stops CDM from binding to the devices managed by QL2300.HAM)

# HPQSP.CDM binding to the devices managed by QL2300.HAM (with SecurePath
30cSP21)
LOAD HPQSP.CDM
LOAD QL2300.HAM /LUNS /ALLPATHS /PORTNAMES SLOT=2
LOAD QL2300.HAM /LUNS /ALLPATHS /PORTNAMES SLOT=2
# multi path managed by HP Secure Path 3.0C SP2.1

Thank you everybody for your helping!!!! (special thanks to Graham,
PetervdM, Darin and Arjan). It permits me to better understand my problem.
My case is resolved.

Best regards

Gildas

Sorry for my English grammar, I’m French 🙂 nobody is perfect !!



> Have you presented any LUN's to your Netware server?
>
>
> Arjan
>
> gildas.bompoil@softwarespectrum.com wrote:
> > CFG /LI show
> > 0C 00
> > It's not a hard drive? it show Controlers?
> >
> > details:
> > CFG.NLM (QL2x00 HAM Tool Version 2.01.06 7 June 2004)
> > A3: Inquiry...
> > A3-OO:00 AA000000 OC 00 DEC HSG80CCL V87F
> > A3-O1:00 AA000100 OC 00 DEC HSG80CCL V87F
> >
> > A4: Inquiry...
> > A4-OO:00 AA010000 OC 00 DEC HSG80CCL V87F
> > A4-O1:00 AA010100 OC 00 DEC HSG80CCL V87F
> >
> > Gildas
> >
> >
> >>Use the CFG.NLM that is in the UNSUPDRV directory (usually
> >>C:\NWSERVER\DRIVERS\UNSUPDRV).
> >>
> >>CFG /LI - this will do a SCSI INQUIRY. If the third and fouth column

are 00
> >>00 -- it's responding as a hard drive.
> >>
> >>What do your devices respond with?
> >>
> >>Darin.
> >>
> >><gildas.bompoil@softwarespectrum.com> wrote in message
> >>news:sUYOe.863$w73.284@prv-forum2.provo.novell.com...
> >>
> >>>On Netware 6.5 SP3, QL2300 detect LUN as Unknown Device Type and not as
> >>>HDD.
> >>>
> >>>list devices command show:
> >>>list devices
> >>>0x0001: [V024-A0-D1:0] Legacy Floppy [FLOPPY]
> >>>
> >>>0x000A: [V504-A2-D0:0] HP Smart Array 6i Slot 0 ID 0 LUN 0 [HDD]
> >>>
> >>>0x0010: [V025-A1-D0:0] TEAC DV-28E-N C.6B [CD]
> >>>
> >>>0x0012: [V597-A4-D0:0] COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
> >>>
> >>>0x0013: [V597-A4-D1:0] COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
> >>>
> >>>0x0015: [V597-A5-D0:0] COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
> >>>
> >>>0x0016: [V597-A5-D1:0] COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
> >>>
> >>>From NoRM, we see for 1 Storage Adapter:
> >>>QL2300 PCI FC Host Adapter Module Slot: 2
> >>>Device Name: COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
> >>>Device Type: Unknown
> >>>Capacity: 0 MB
> >>>TID: 1
> >>>LUN: 0
> >>>Object ID: 13h
> >>>
> >>>Device Name: COMPAQ HSG80CCL 50001FE10008AEE0 (V87F)
> >>>Device Type: Unknown
> >>>Capacity: 0 MB
> >>>TID: 0
> >>>LUN: 0
> >>>Object ID: 12h
> >>>
> >>>
> >>>From NSSMU or iManager i cannot see HDD.
> >>>What are specifications to see correctly LUN?
> >>>
> >>>Best regards,
> >>>
> >>>Gildas BOMPOIL
> >>>System Engineer
> >>>Software Spectrum
> >>>gildas.bompoil@softwarespectrum.com
> >>>
> >>>details:
> >>>Server HP DL380 G4
> >>> Bios Firmware : P51 06/02/2005
> >>>HBA1: QLogic PCI Fibre Channel NetWare Driver
> >>> QLogic Name QLA2340 (HP Name FCA2214)
> >>> Files : QL2300.HAM, QL2300.DDI
> >>> Version : 6.80f (6.80.06)
> >>> Firmware : 1.45
> >>> Slot : 2
> >>>HBA2: QLogic PCI Fibre Channel NetWare Driver
> >>> QLogic Name QLA2340 HP Name FCA2214
> >>> Files : QL2300.HAM, QL2300.DDI
> >>> Version : 6.80f (6.80.06)
> >>> Firmware : 1.45
> >>> Slot : 3
> >>>
> >>>SAN HP StorageWorks MA8000
> >>>HSG80 : ACS 8.7 f1
> >>>LUN: 438 Go (146x4 RAID5)
> >>>
> >>>OS NetWare 6.5 SP3
> >>>QL2300.HAM : 6.80f (6.80.06)
> >>> CPQSHD.CDM: 2.04 (4 Apr 2005)
> >>>
> >>> HP Secure Path 3.0C SP 2.1
> >>> HPQSP.CDM: 0.11.25
> >>>
> >>>Startup.ncf:
> >>>LOAD ACPIDRV.PSM
> >>>######## End PSM Drivers ########
> >>>LOAD CPQSHD.CDM
> >>>LOAD IDECD.CDM
> >>>######## End CDM Drivers ########
> >>>LOAD IDEATA.HAM SLOT=10011
> >>>LOAD CPQRAID.HAM SLOT=10019
> >>>#LOAD QL2300.HAM SLOT=2 /LUNS
> >>>#LOAD QL2300.HAM SLOT=3 /LUNS
> >>># Modified by Compaq SecurePath installation program SP30C SP2.1
> >>>load HPQSP.CDM
> >>>load QL2300.HAM /luns /allpaths /portnames SLOT=2
> >>>load QL2300.HAM /luns /allpaths /portnames SLOT=3
> >>>######## End HAM Drivers ########
> >>>LOAD KEYB.NLM France
> >>>LOAD CHARSET.NLM CP850
> >>>
> >>>
> >>
> >>

> >


0 Likes
The opinions expressed above are the personal opinions of the authors, not of Micro Focus. By using this site, you accept the Terms of Use and Rules of Participation. Certain versions of content ("Material") accessible here may contain branding from Hewlett-Packard Company (now HP Inc.) and Hewlett Packard Enterprise Company. As of September 1, 2017, the Material is now offered by Micro Focus, a separately owned and operated company. Any reference to the HP and Hewlett Packard Enterprise/HPE marks is historical in nature, and the HP and Hewlett Packard Enterprise/HPE marks are the property of their respective owners.