Welcome Serena Central users! CLICK HERE
The migration of the Serena Central community is currently underway. Be sure to read THIS MESSAGE to get your new login set up to access your account.
gathagan Super Contributor.
Super Contributor.
845 views

Storage expansion/relocation logic check

I'm in the midst of expanding the storage on my GroupWise server and I want
to pass my intended process on to greater minds to see if I'm missing any
hidden "gotcha's".

The server is running NW6.5SP8 and eDir 8.8.5

Currently, both the SYS pool partition and the VOL1 partition reside on a
single 526GB LUN on my SAN array.
My plan to both expand my capacity and place each pool on their own LUN are
as follows:

Add a 10GB LUN and a 1TB LUN to the server's host group in my array manager.

From NSS menu:
Select Devices from menu, use F2 to re-scan and F3 to initialize each new
partition
Mirror SYS volume on 10GB partition
Mirror VOL1 volume on 1TB partition
Allow mirrors to fully synch

Down the GroupWise system

Back in my array manager, remove original 526GB LUN from the server's host
group.

From NSS menu
Select Devices from menu and use F2 to re-scan
Go to RAID devices, select each RAID and delete offline partitions

Run the "partfix /m" command from the server console
Reset server

From NSS menu:
Expand each pool to the limits of each partition's respective LUN.

Restart GroupWise

I've replicated the process successfully with a test server, so I'm not
worried about the mechanics of the process.
My test server is in its own eDir tree, however, so one of my concerns is
whether or not this has any impact in my production tree.
I've always assumed not, but wanted to be sure.

My second concern is one of space.
The VOL1 volume is down to less than 2GB of space.
I've also always assumed that the mirroring process only consumes CPU cycles
and a bit of RAM, not any disk space.
Is that assumption correct?

My third assumption is that the mirroring process will take the same amount
of time on identically-sized volumes, since it's not concerned with what is
actually on the volumes.
In other words, if the larger volume took an hour to mirror on my test
server that held no data, the same would hold true of my production volume
that's filled with data.

Am I missing anything that will come back to haunt me?

Thanks in advance,
Grant


Labels (2)
0 Likes
1 Reply
Highlighted
Anonymous_User Absent Member.
Absent Member.

Re: Storage expansion/relocation logic check

Grant,

It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.

Has your problem been resolved? If not, you might try one of the following options:

- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)

Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php

If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.

Good luck!

Your Novell Product Support Forums Team
http://forums.novell.com/

0 Likes
The opinions expressed above are the personal opinions of the authors, not of Micro Focus. By using this site, you accept the Terms of Use and Rules of Participation. Certain versions of content ("Material") accessible here may contain branding from Hewlett-Packard Company (now HP Inc.) and Hewlett Packard Enterprise Company. As of September 1, 2017, the Material is now offered by Micro Focus, a separately owned and operated company. Any reference to the HP and Hewlett Packard Enterprise/HPE marks is historical in nature, and the HP and Hewlett Packard Enterprise/HPE marks are the property of their respective owners.