sgxy18 Absent Member.
Absent Member.

Re: error for copy datas to volume

Thank you very much!

i add user licenses from NWAdmin , i can see Novell+ NetWare6 user+650 (sn:407176548;sn:407181548;sn:407186548.......)on NWAdmin .

General:
Units Installed :100.
Units in Use:1
Units Available:99
Highest Units Used:1

but I type VERSION on the server console ,it still tip:

novell netware 6 server 650 SN:302027809
novell netware 6 user 650 (hard stop)

why???
===========================================
and i copy data from client PC ,The error still appear. the mapped driver auto disconnection.But It auto re-connect some minutes after
0 Likes
Knowledge Partner
Knowledge Partner

Re: error for copy datas to volume

Sgxy18,
> but I type VERSION on the server console ,it still tip:
>
> novell netware 6 server 650 SN:302027809
> novell netware 6 user 650 (hard stop)
>
> why???


That is normal. Now, if you look at the license usage (on the license),
do you see your name or workstation there?

> ===========================================
> And i copy data from client PC ,The error still appear. the mapped
> driver auto disconnection.But It auto re-connect some minutes after


Test with the 4.9 client (latest) on one PC. Does it still happen?

- Anders Gustafsson (Sysop)
The Aaland Islands (N60 E20)


Novell has a new enhancement request system,
or what is now known as the requirement portal.
If customers would like to give input in the upcoming
releases of Novell products then they should go to
http://www.novell.com/rms

0 Likes
sgxy18 Absent Member.
Absent Member.

Re: error for copy datas to volume

thank you!


That is normal. Now, if you look at the license usage (on the license),
do you see your name or workstation there?

> ===========================================
yes , i can see my name at the "sn:407176548" -->Units in Use


Test with the 4.9 client (latest) on one PC. Does it still happen?

today i install client 4.91 sp5 ,and try it . it still happen.

how can i do???
0 Likes
Knowledge Partner
Knowledge Partner

Re: error for copy datas to volume

Sgxy18,
> Test with the 4.9 client (latest) on one PC. Does it still happen?
>
> TODAY I INSTALL CLIENT 4.91 SP5 ,AND TRY IT . IT STILL HAPPEN.
>
> how can i do???


Something is wrong here, could be a network and/or cabling problem. To
find out we need to look at a packet trace between server and
workstation.

- Anders Gustafsson (Sysop)
The Aaland Islands (N60 E20)


Novell has a new enhancement request system,
or what is now known as the requirement portal.
If customers would like to give input in the upcoming
releases of Novell products then they should go to
http://www.novell.com/rms

0 Likes
sgxy18 Absent Member.
Absent Member.

Re: error for copy datas to volume

thanks!

i use ping the server when copy data,it is ok all time . and i only use a lan cable between server and PC. and the lan cable is ok.


where can i get packet trace between server and workstation?
0 Likes
Knowledge Partner
Knowledge Partner

Re: error for copy datas to volume

Sgxy18,
> i use *ping *the server when copy data,it is ok all time . and i only
> use a lan cable between server and PC. and the lan cable is ok.
>
> where can i get packet trace between server and workstation?
>

OK. You see no packet loss when pinging, yet yo get disconnects? How do
these disconnects manifest themselves? Any error messages.

To get a packet trace, download and install Wireshark on that PC. Start
the capture before you copy, then stop afterwards. Look for errors.

- Anders Gustafsson (Sysop)
The Aaland Islands (N60 E20)


Novell has a new enhancement request system,
or what is now known as the requirement portal.
If customers would like to give input in the upcoming
releases of Novell products then they should go to
http://www.novell.com/rms

0 Likes
Knowledge Partner
Knowledge Partner

Re: error for copy datas to volume

Hm.. I reread your initial post:

" the
mounting volume is automatically disconnected. what happen? "

Do you mean that:

"The connection from workstation to server is lost, but the server is
fine!"

OR

"The server volume is dismounted" (Ie VOLUME XXXXX WAS DISMOUNTED"

- Anders Gustafsson (Sysop)
The Aaland Islands (N60 E20)


Novell has a new enhancement request system,
or what is now known as the requirement portal.
If customers would like to give input in the upcoming
releases of Novell products then they should go to
http://www.novell.com/rms

0 Likes
sgxy18 Absent Member.
Absent Member.

Re: error for copy datas to volume

when coping appear one error tips:
"Can not copy file *****.**,The specified network name is no longer available".
then the copy stop.
and i restart PC ,i can re-access the server volume through the client


means:

"The mapping network driver is lost, but the server is fine!", in server no Any error messages.
0 Likes
Knowledge Partner
Knowledge Partner

Re: error for copy datas to volume

Sgxy18,
> "The mapping network driver is lost, but the server is fine!", in
> server no Any error messages.
>

OK. Then we need to see a network trace.

- Anders Gustafsson (Sysop)
The Aaland Islands (N60 E20)


Novell has a new enhancement request system,
or what is now known as the requirement portal.
If customers would like to give input in the upcoming
releases of Novell products then they should go to
http://www.novell.com/rms

0 Likes
sgxy18 Absent Member.
Absent Member.

Re: error for copy datas to volume

Thank your reply!

Today I install the Wireshark on the PC. and capture the Errors .
0 Likes
sgxy18 Absent Member.
Absent Member.

Re: error for copy datas to volume

Thank your reply!

Today I install the Wireshark on the PC. and capture the Errors .

No. Time Source Destination Protocol Info
4681 192.224086 0107d1d6.000000000001 5aadc773.00112f386364 NCP ACK Server Busy, Request Being Processed

Frame 4681 (60 bytes on wire, 60 bytes captured)
IEEE 802.3 Ethernet
Logical-Link Control
Internetwork Packet eXchange
NetWare Core Protocol

No. Time Source Destination Protocol Info
4682 192.459973 192.168.1.1 192.168.1.30 TCP [TCP Retransmission] [TCP segment of a reassembled PDU]

Frame 4682 (198 bytes on wire, 198 bytes captured)
Ethernet II, Src: HewlettP_fb:3c:14 (d8:d3:85:fb:3c:14), Dst: AsustekC_38:63:64 (00:11:2f:38:63:64)
Internet Protocol, Src: 192.168.1.1 (192.168.1.1), Dst: 192.168.1.30 (192.168.1.30)
Transmission Control Protocol, Src Port: ncp (524), Dst Port: td-postman (1049), Seq: 2, Ack: 27, Len: 144

the Error appear! then the copy stop!

No. Time Source Destination Protocol Info
4683 192.460025 192.168.1.30 192.168.1.1 TCP td-postman > ncp [ACK] Seq=27 Ack=146 Win=65347 Len=0

Frame 4683 (54 bytes on wire, 54 bytes captured)
Ethernet II, Src: AsustekC_38:63:64 (00:11:2f:38:63:64), Dst: HewlettP_fb:3c:14 (d8:d3:85:fb:3c:14)
Internet Protocol, Src: 192.168.1.30 (192.168.1.30), Dst: 192.168.1.1 (192.168.1.1)
Transmission Control Protocol, Src Port: td-postman (1049), Dst Port: ncp (524), Seq: 27, Ack: 146, Len: 0
0 Likes
Knowledge Partner
Knowledge Partner

Re: error for copy datas to volume

Sgxy18,
> THE ERROR APPEAR! THEN THE COPY STOP!
>

What error? Can you please mail me the trace file at d a l t o n AT p e
d a g o DOT f i and tell me what packet number you are referring to?

- Anders Gustafsson (Sysop)
The Aaland Islands (N60 E20)


Novell has a new enhancement request system,
or what is now known as the requirement portal.
If customers would like to give input in the upcoming
releases of Novell products then they should go to
http://www.novell.com/rms

0 Likes
The opinions expressed above are the personal opinions of the authors, not of Micro Focus. By using this site, you accept the Terms of Use and Rules of Participation. Certain versions of content ("Material") accessible here may contain branding from Hewlett-Packard Company (now HP Inc.) and Hewlett Packard Enterprise Company. As of September 1, 2017, the Material is now offered by Micro Focus, a separately owned and operated company. Any reference to the HP and Hewlett Packard Enterprise/HPE marks is historical in nature, and the HP and Hewlett Packard Enterprise/HPE marks are the property of their respective owners.