sgxy18 Absent Member.
Absent Member.

Re: error for copy datas to volume

Thank you very much.

i had email the trace file to you (dalton@pedago.fi).
0 Likes
Knowledge Partner
Knowledge Partner

Re: error for copy datas to volume

Sgxy18,
> i had email the trace file to you (dalton@pedago.fi).
>

Yes, unfortunately in text format :), but I did find something:

No. Time Source Destination
Protocol Info
4672 176.411472 5aadc773.00112f386364 0107d1d6.000000000001 NCP
C Open or Create File or Subdirectory:
publish/31682/Drawings/700950.wmf

Frame 4672 (120 bytes on wire, 120 bytes captured)
IEEE 802.3 Ethernet
Logical-Link Control
Internetwork Packet eXchange
NetWare Core Protocol

No. Time Source Destination
Protocol Info
4673 176.411594 0107d1d6.000000000001 5aadc773.00112f386364 NCP
ACK Server Busy, Request Being Processed

There is a problem with your server, as it replies that it is busy and
the workstation eventually times out. If you have monitor loaded whan
you copy:

+------------------------------------------------+
¦ General Information ¦
+------------------------------------------------¦
¦ Utilization: 3% ¦
¦ Server up time: 45.18.25.27 ¦
¦ Online processors: 1 ¦
¦ Original cache buffers: 785.269 ¦
¦ Total cache buffers: 238.805 ¦
¦ Dirty cache buffers: 0 ¦
¦ Long term cache hits: 92% ¦
¦ Current disk requests: 1 ¦
¦ Packet receive buffers: 2.000 ¦
¦ Directory cache buffers: 504 ¦

What do you see for "Utilization" and "Current disk requests"? What
type of server hardware is this, ie CPU, disk controller and disks?

- Anders Gustafsson (Sysop)
The Aaland Islands (N60 E20)


Novell has a new enhancement request system,
or what is now known as the requirement portal.
If customers would like to give input in the upcoming
releases of Novell products then they should go to
http://www.novell.com/rms

0 Likes
sgxy18 Absent Member.
Absent Member.

Re: error for copy datas to volume

i had email the config.txt to you.


thank you very much.
0 Likes
Knowledge Partner
Knowledge Partner

Re: error for copy datas to volume

Sgxy18,
> i had email the config.txt to you.
>

Yes, but I still want to know what server utilization looks like when
you do the copy that fails, so, again: What do you see for
"Utilization" and "Current disk requests"?

Also what speed does MONITOR report for the server NIC? Ie LAN/WAN...

+------------------------------------------------------------------+
¦ PUBLIC_EII [N100 port=5040 mem=FDEB0000 int=3 frame=ETHERNET_II] ¦
+------------------------------------------------------------------¦
¦ 
¦ Custom counters ¦
¦ Link Status (0 is up, 1 is down or N/A) 0 ¦
¦ Duplex (0 is N/A, 1 is Half, 2 is Full) 2 ¦
¦ Current Speed (0 is N/A) 100 ¦
¦ Hardware Status (non-zero indicates failure) 0 ¦
¦ Tx Good Frames 97.287.794 ¦
¦ Tx Maximum Collisions 0 ¦
¦ Tx Late Collisions 0 ¦
¦ Tx DMA Underruns 1.906 ¦
¦ Tx Lost Carrier Sense 3 ¦
¦ Tx Frames Deferred 0 ¦
¦ Tx OK With Single Collisions 0 ¦
¦ Tx OK With Multiple Collisions 0 ¦
¦ Tx Total Collisions 0 ¦
¦ Rx Good Frames 162.254.207 ¦
¦ Rx CRC Errors 0 

Make sure that all units between server and workstation agree on the
same speed/duplex setting

- Anders Gustafsson (Sysop)
The Aaland Islands (N60 E20)


Novell has a new enhancement request system,
or what is now known as the requirement portal.
If customers would like to give input in the upcoming
releases of Novell products then they should go to
http://www.novell.com/rms

0 Likes
sgxy18 Absent Member.
Absent Member.

Re: error for copy datas to volume

i am sorry about it .

What do you see for
"Utilization" and "Current disk requests"?

where i can see this info? the server no anything error information.

thanks.
0 Likes
Knowledge Partner
Knowledge Partner

Re: error for copy datas to volume

Sgxy18,
> What do you see for
> "Utilization" and "Current disk requests"?
>
> where i can see this info? the server no anything error information.
>

LOAD MONITOR, you get a screen like the one I posted earlier. Look at
utilisation and disk requests as the problems happen. Another way to
see the same info is to use https://serveraddress:8009, but use MONITOR
for now.

Same monitor has a menu item "LAN/WAN..." Select that and you can
select your network card and see stats.

The problems you are seeing can either be caused by a disk bottleneck
or a network problem, such as one end doing 100mb/s half duplex and the
other 100 full.

- Anders Gustafsson (Sysop)
The Aaland Islands (N60 E20)


Novell has a new enhancement request system,
or what is now known as the requirement portal.
If customers would like to give input in the upcoming
releases of Novell products then they should go to
http://www.novell.com/rms

0 Likes
sgxy18 Absent Member.
Absent Member.

Re: error for copy datas to volume

+------------------------------------------------+
¦ General Information ¦
+------------------------------------------------¦
¦ Utilization: 0% ¦
¦ Server up time: 0.23.11.23 ¦
¦ Online processors: 8 ¦
¦ Original cache buffers: 913.842 ¦
¦ Total cache buffers: 371.695 ¦
¦ Dirty cache buffers: 0 ¦
¦ Long term cache hits: 0% ¦
¦ Current disk requests: 1.000 ¦
¦ Packet receive buffers: 2.000 ¦
¦ Directory cache buffers: 0¦
| Maximun service processes 750
| Current service processes : 10
| Current MP Service Processes: 146
| Current Connection :2
| Open Files :140

====================================
+-----------------------------------------------
Custom Counters
+-----------------------------------------------
| Adadter link status (down=0 up=1) : 1
| Media Type (copper=1 fiber=2 loopback=3 unknown=4) :1
| Adapter line speed(Mbps) :100
| Adapter Duplex Mode (Half=0 full=1) :1
| Adapter Line Connection Mode (Auto=0 Force=1) :0
| Checksum Mode(off=0 Tx=1 RX=2 TX&RX=3) :0
| Jumbo Frame Size (bytes ) :0
| No Xmit Resc Count# :0
| RCB allow Failed Count# :0
============================================

is it have some error ? Thanks.
0 Likes
Knowledge Partner
Knowledge Partner

Re: error for copy datas to volume

Sgxy18,
> ¦ Online processors: 8 ¦
>

Does this server really have 8 processors or does it have
hyperthreading enabled? If yes, then turn it off in BIOS.

¦ Current disk requests: 1.000 ¦

This is when copying, right? It is normally a low value?

HP DL380 G6
sn:491324-AA1
CPU:xeon nehalem ep 2.4Ghz
memory:3*2GB
HP Smart Array p410i

How is the smart array configured and want type of disks?

- Anders Gustafsson (Sysop)
The Aaland Islands (N60 E20)


Novell has a new enhancement request system,
or what is now known as the requirement portal.
If customers would like to give input in the upcoming
releases of Novell products then they should go to
http://www.novell.com/rms

0 Likes
sgxy18 Absent Member.
Absent Member.

Re: error for copy datas to volume

Thanks .

=============================
Does this server really have 8 processors or does it have
hyperthreading enabled? If yes, then turn it off in BIOS.
======================
yes , i had disable the hyperthreading in BIOS.

¦ Current disk requests: 1.000 ¦

Yes, this is when copping .but i copy the file folder >10Gb.

How is the smart array configured and want type of disks?

Controller:HP Smart Array P401i Slot 0
2* 73G seagate sas 10K 2.5 HDD made RAID 1;
5*300G seagate sas 10k 2.5 HDD Made RAID 5;
I Set of three volumes: USER:500G,PRODUCTS:500G,OTHER:140G;
0 Likes
sgxy18 Absent Member.
Absent Member.

Re: error for copy datas to volume

use https://serveraddress:8009, i see it
=============================
Connection Information
=============================
Connection :23
Login Status: Normal
Authentication Method :NDS
Login Time Tuseday ,2010 August 24 15:23
Privileges Supervisor
Connection Type NCP via IPX
NCP Repquests 3,813,990
Bytes Read 5,770
Bytes Weitten 1,862,181,403
Network Address IPX 5AADC773.112F386364
0 Likes
Knowledge Partner
Knowledge Partner

Re: error for copy datas to volume

Sgxy18,
> YES, THIS IS WHEN COPPING .BUT I COPY THE FILE FOLDER >10GB.
>

OK. Does it happen right away, or after you have copied some files?
10%? 20%?? 50%??

- Anders Gustafsson (Sysop)
The Aaland Islands (N60 E20)


Novell has a new enhancement request system,
or what is now known as the requirement portal.
If customers would like to give input in the upcoming
releases of Novell products then they should go to
http://www.novell.com/rms

0 Likes
sgxy18 Absent Member.
Absent Member.

Re: error for copy datas to volume

It is a random happen
0 Likes
The opinions expressed above are the personal opinions of the authors, not of Micro Focus. By using this site, you accept the Terms of Use and Rules of Participation. Certain versions of content ("Material") accessible here may contain branding from Hewlett-Packard Company (now HP Inc.) and Hewlett Packard Enterprise Company. As of September 1, 2017, the Material is now offered by Micro Focus, a separately owned and operated company. Any reference to the HP and Hewlett Packard Enterprise/HPE marks is historical in nature, and the HP and Hewlett Packard Enterprise/HPE marks are the property of their respective owners.