Anonymous_User Absent Member.
Absent Member.
1231 views

iManager and Apache issues

Tree consists of 1 x NW65SP4a server, 2 x OES_SP1 server. First 2 servers
removal of DS went fine (previously was NetWare 6.0 SP5), 3rd and final
server, removal of DS (NetWare 6.0 SP5), removed all associated objects in
NWADMIN. Fresh install of OES_SP1 overlay, all went fine except when it
comes to installing Certificates, had an error I couldn't get pass so I had
to go on without installing certificates. Server comes up, no Apache is
loaded, can't use iManager to install license or other duties. Run PKIDiag
2.78 over the server, see below;

---------------------------------------------------------------------------
PKIDiag 2.78 -- (compiled Jul 18 2005 17:19:11).
(Check the end of the log for the last repair results)
Current Time: Wed Dec 21 11:33:20 2005
User logged-in as: admin.fechs.
Fixing mode
Rename and create mode
Rename and create when necessary

--> Server Name = 'FECHS1'
---------------------------------------------------------------------------

Step 1 Verifying the Server's link to the SAS Service Object.
Server 'FECHS1.Services.FECHS' points to SAS Service object 'SAS Service
- FECHS1.Services.FECHS'
Step 1 succeeded.

Step 2 Verifying the SAS Service Object
SAS Service object 'SAS Service - FECHS1.Services.FECHS' is backlinked
to server 'FECHS1.Services.FECHS'.
Step 2 succeeded.

Step 3 Verifying the links to the KMOs
Reading the links for SAS Service object 'SAS Service -
FECHS1.Services.FECHS'.
--> No KMOs are linked to Service object 'SAS Service - FECHS1.Services.FECHS'.
Step 3 succeeded.

Step 4 Verifying the KMOs
---> Testing KMO 'SSL CertificateDNS - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'DNS AG fechs2\.fechs\.sa\.edu\.au - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'SSL CertificateIP - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'IP AG 10\.60\.88\.3 - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'DNS AG fechs3\.fechs\.sa\.edu\.au - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'SSL CertificateDNS - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'DNS AG FECHS3 - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'SSL CertificateIP - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'IP AG 10\.60\.88\.10 - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

Step 4 succeeded.

Step 5 Re-verifying the links to the KMOs
Reading the links for SAS Service object 'SAS Service -
FECHS1.Services.FECHS'.
--> No KMOs are linked to Service object 'SAS Service - FECHS1.Services.FECHS'.
Step 5 succeeded.

Step 6 Creating IP and DNS Certificates if necessary.
--> Number of Server IP addresses = 1
--> The default IP address is: 10.60.88.2
PROBLEM: A SSL CertificateIP does not exist
Step 6 failed -603.


Note: Occasionally multiple problems will be solved with a single fix.

Fixable problems found: 1
Problems fixed: 0
Un-fixable problems found: 0


---------------------------------------------------------------------------
PKIDiag 2.78 -- (compiled Jul 18 2005 17:19:11).
(Check the end of the log for the last repair results)
Current Time: Wed Dec 21 11:34:00 2005
User logged-in as: admin.fechs.
Fixing mode
Rekey mode
Re-key when necessary

--> Server Name = 'FECHS1'
---------------------------------------------------------------------------

Step 1 Verifying the Server's link to the SAS Service Object.
Server 'FECHS1.Services.FECHS' points to SAS Service object 'SAS Service
- FECHS1.Services.FECHS'
Step 1 succeeded.

Step 2 Verifying the SAS Service Object
SAS Service object 'SAS Service - FECHS1.Services.FECHS' is backlinked
to server 'FECHS1.Services.FECHS'.
Step 2 succeeded.

Step 3 Verifying the links to the KMOs
Reading the links for SAS Service object 'SAS Service -
FECHS1.Services.FECHS'.
--> No KMOs are linked to Service object 'SAS Service - FECHS1.Services.FECHS'.
Step 3 succeeded.

Step 4 Verifying the KMOs
---> Testing KMO 'SSL CertificateDNS - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'DNS AG fechs2\.fechs\.sa\.edu\.au - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'SSL CertificateIP - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'IP AG 10\.60\.88\.3 - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'DNS AG fechs3\.fechs\.sa\.edu\.au - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'SSL CertificateDNS - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'DNS AG FECHS3 - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'SSL CertificateIP - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'IP AG 10\.60\.88\.10 - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

Step 4 succeeded.

Step 5 Re-verifying the links to the KMOs
Reading the links for SAS Service object 'SAS Service -
FECHS1.Services.FECHS'.
--> No KMOs are linked to Service object 'SAS Service - FECHS1.Services.FECHS'.
Step 5 succeeded.

Step 6 Creating IP and DNS Certificates if necessary.
--> Number of Server IP addresses = 1
--> The default IP address is: 10.60.88.2
PROBLEM: A SSL CertificateIP does not exist
Step 6 failed -603.


Note: Occasionally multiple problems will be solved with a single fix.

Fixable problems found: 1
Problems fixed: 0
Un-fixable problems found: 0


---------------------------------------------------------------------------
PKIDiag 2.78 -- (compiled Jul 18 2005 17:19:11).
(Check the end of the log for the last repair results)
Current Time: Wed Dec 21 11:35:17 2005
User logged-in as: admin.fechs.
Fixing mode
Rename and create mode
Always Re-key

--> Server Name = 'FECHS1'
---------------------------------------------------------------------------

Step 1 Verifying the Server's link to the SAS Service Object.
Server 'FECHS1.Services.FECHS' points to SAS Service object 'SAS Service
- FECHS1.Services.FECHS'
Step 1 succeeded.

Step 2 Verifying the SAS Service Object
SAS Service object 'SAS Service - FECHS1.Services.FECHS' is backlinked
to server 'FECHS1.Services.FECHS'.
Step 2 succeeded.

Step 3 Verifying the links to the KMOs
Reading the links for SAS Service object 'SAS Service -
FECHS1.Services.FECHS'.
--> No KMOs are linked to Service object 'SAS Service - FECHS1.Services.FECHS'.
Step 3 succeeded.

Step 4 Verifying the KMOs
---> Testing KMO 'SSL CertificateDNS - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'DNS AG fechs2\.fechs\.sa\.edu\.au - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'SSL CertificateIP - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'IP AG 10\.60\.88\.3 - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'DNS AG fechs3\.fechs\.sa\.edu\.au - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'SSL CertificateDNS - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'DNS AG FECHS3 - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'SSL CertificateIP - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'IP AG 10\.60\.88\.10 - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

Step 4 succeeded.

Step 5 Re-verifying the links to the KMOs
Reading the links for SAS Service object 'SAS Service -
FECHS1.Services.FECHS'.
--> No KMOs are linked to Service object 'SAS Service - FECHS1.Services.FECHS'.
Step 5 succeeded.

Step 6 Creating IP and DNS Certificates if necessary.
--> Number of Server IP addresses = 1
--> The default IP address is: 10.60.88.2
PROBLEM: A SSL CertificateIP does not exist
Step 6 failed -603.


Note: Occasionally multiple problems will be solved with a single fix.

Fixable problems found: 1
Problems fixed: 0
Un-fixable problems found: 0


---------------------------------------------------------------------------
PKIDiag 2.78 -- (compiled Jul 18 2005 17:19:11).
(Check the end of the log for the last repair results)
Current Time: Wed Dec 21 12:02:58 2005
User logged-in as: admin.fechs.
Fixing mode
Rekey mode
Always Re-key

--> Server Name = 'FECHS1'
---------------------------------------------------------------------------

Step 1 Verifying the Server's link to the SAS Service Object.
Server 'FECHS1.Services.FECHS' points to SAS Service object 'SAS Service
- FECHS1.Services.FECHS'
Step 1 succeeded.

Step 2 Verifying the SAS Service Object
SAS Service object 'SAS Service - FECHS1.Services.FECHS' is backlinked
to server 'FECHS1.Services.FECHS'.
Step 2 succeeded.

Step 3 Verifying the links to the KMOs
Reading the links for SAS Service object 'SAS Service -
FECHS1.Services.FECHS'.
--> No KMOs are linked to Service object 'SAS Service - FECHS1.Services.FECHS'.
Step 3 succeeded.

Step 4 Verifying the KMOs
---> Testing KMO 'SSL CertificateDNS - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'DNS AG fechs2\.fechs\.sa\.edu\.au - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'SSL CertificateIP - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'IP AG 10\.60\.88\.3 - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'DNS AG fechs3\.fechs\.sa\.edu\.au - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'SSL CertificateDNS - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'DNS AG FECHS3 - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'SSL CertificateIP - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'IP AG 10\.60\.88\.10 - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

Step 4 succeeded.

Step 5 Re-verifying the links to the KMOs
Reading the links for SAS Service object 'SAS Service -
FECHS1.Services.FECHS'.
--> No KMOs are linked to Service object 'SAS Service - FECHS1.Services.FECHS'.
Step 5 succeeded.

Step 6 Creating IP and DNS Certificates if necessary.
--> Number of Server IP addresses = 1
--> The default IP address is: 10.60.88.2
PROBLEM: A SSL CertificateIP does not exist
Step 6 failed -603.


Note: Occasionally multiple problems will be solved with a single fix.

Fixable problems found: 1
Problems fixed: 0
Un-fixable problems found: 0


---------------------------------------------------------------------------
PKIDiag 2.78 -- (compiled Jul 18 2005 17:19:11).
(Check the end of the log for the last repair results)
Current Time: Wed Dec 21 12:11:39 2005
User logged-in as: Admin.fechs.
Fixing mode
Rekey mode
Re-key when necessary

--> Server Name = 'FECHS1'
---------------------------------------------------------------------------

Step 1 Verifying the Server's link to the SAS Service Object.
Server 'FECHS1.Services.FECHS' points to SAS Service object 'SAS Service
- FECHS1.Services.FECHS'
Step 1 succeeded.

Step 2 Verifying the SAS Service Object
SAS Service object 'SAS Service - FECHS1.Services.FECHS' is backlinked
to server 'FECHS1.Services.FECHS'.
Step 2 succeeded.

Step 3 Verifying the links to the KMOs
Reading the links for SAS Service object 'SAS Service -
FECHS1.Services.FECHS'.
--> No KMOs are linked to Service object 'SAS Service - FECHS1.Services.FECHS'.
Step 3 succeeded.

Step 4 Verifying the KMOs
---> Testing KMO 'SSL CertificateDNS - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'DNS AG fechs2\.fechs\.sa\.edu\.au - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'SSL CertificateIP - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'IP AG 10\.60\.88\.3 - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'DNS AG fechs3\.fechs\.sa\.edu\.au - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'SSL CertificateDNS - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'DNS AG FECHS3 - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'SSL CertificateIP - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'IP AG 10\.60\.88\.10 - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

Step 4 succeeded.

Step 5 Re-verifying the links to the KMOs
Reading the links for SAS Service object 'SAS Service -
FECHS1.Services.FECHS'.
--> No KMOs are linked to Service object 'SAS Service - FECHS1.Services.FECHS'.
Step 5 succeeded.

Step 6 Creating IP and DNS Certificates if necessary.
--> Number of Server IP addresses = 1
--> The default IP address is: 10.60.88.2
PROBLEM: A SSL CertificateIP does not exist
Step 6 failed -603.


Note: Occasionally multiple problems will be solved with a single fix.

Fixable problems found: 1
Problems fixed: 0
Un-fixable problems found: 0


---------------------------------------------------------------------------
PKIDiag 2.78 -- (compiled Jul 18 2005 17:19:11).
(Check the end of the log for the last repair results)
Current Time: Wed Dec 21 12:12:53 2005
User logged-in as: admin.fechs.
Fixing mode
Rekey mode
Always Re-key

--> Server Name = 'FECHS1'
---------------------------------------------------------------------------

Step 1 Verifying the Server's link to the SAS Service Object.
Step 1 failed -601.

Step 2 Verifying the SAS Service Object
PROBLEM: A SAS Service object was not found.
FIX: Successfully created and linked SAS Service object 'SAS Service -
FECHS1.Services.FECHS' to 'FECHS1.Services.FECHS'.
PROBLEM: SAS Service object 'SAS Service - FECHS1.Services.FECHS' does not
have Read All Attribute rights to itself.'
Fix -->Successfully gave rights to the SAS Service object.
Step 2 succeeded.

Step 3 Verifying the links to the KMOs
Reading the links for SAS Service object 'SAS Service -
FECHS1.Services.FECHS'.
--> No KMOs are linked to Service object 'SAS Service - FECHS1.Services.FECHS'.
Step 3 succeeded.

Step 4 Verifying the KMOs
---> Testing KMO 'SSL CertificateDNS - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'DNS AG fechs2\.fechs\.sa\.edu\.au - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'SSL CertificateIP - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'IP AG 10\.60\.88\.3 - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'DNS AG fechs3\.fechs\.sa\.edu\.au - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'SSL CertificateDNS - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'DNS AG FECHS3 - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'SSL CertificateIP - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'IP AG 10\.60\.88\.10 - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

Step 4 succeeded.

Step 5 Re-verifying the links to the KMOs
Reading the links for SAS Service object 'SAS Service -
FECHS1.Services.FECHS'.
--> No KMOs are linked to Service object 'SAS Service - FECHS1.Services.FECHS'.
Step 5 succeeded.

Step 6 Creating IP and DNS Certificates if necessary.
--> Number of Server IP addresses = 1
--> The default IP address is: 10.60.88.2
PROBLEM: A SSL CertificateIP does not exist
Step 6 failed -603.


Note: Occasionally multiple problems will be solved with a single fix.

Fixable problems found: 3
Problems fixed: 2
Un-fixable problems found: 0


---------------------------------------------------------------------------
PKIDiag 2.78 -- (compiled Jul 18 2005 17:19:11).
(Check the end of the log for the last repair results)
Current Time: Wed Dec 21 12:14:07 2005
User logged-in as: admin.fechs.
Fixing mode
Rekey mode
Always Re-key

--> Server Name = 'FECHS1'
---------------------------------------------------------------------------

Step 1 Verifying the Server's link to the SAS Service Object.
Server 'FECHS1.Services.FECHS' points to SAS Service object 'SAS Service
- FECHS1.Services.FECHS'
Step 1 succeeded.

Step 2 Verifying the SAS Service Object
SAS Service object 'SAS Service - FECHS1.Services.FECHS' is backlinked
to server 'FECHS1.Services.FECHS'.
Step 2 succeeded.

Step 3 Verifying the links to the KMOs
Reading the links for SAS Service object 'SAS Service -
FECHS1.Services.FECHS'.
--> No KMOs are linked to Service object 'SAS Service - FECHS1.Services.FECHS'.
Step 3 succeeded.

Step 4 Verifying the KMOs
---> Testing KMO 'SSL CertificateDNS - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'DNS AG fechs2\.fechs\.sa\.edu\.au - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'SSL CertificateIP - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'IP AG 10\.60\.88\.3 - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'DNS AG fechs3\.fechs\.sa\.edu\.au - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'SSL CertificateDNS - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'DNS AG FECHS3 - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'SSL CertificateIP - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'IP AG 10\.60\.88\.10 - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

Step 4 succeeded.

Step 5 Re-verifying the links to the KMOs
Reading the links for SAS Service object 'SAS Service -
FECHS1.Services.FECHS'.
--> No KMOs are linked to Service object 'SAS Service - FECHS1.Services.FECHS'.
Step 5 succeeded.

Step 6 Creating IP and DNS Certificates if necessary.
--> Number of Server IP addresses = 1
--> The default IP address is: 10.60.88.2
PROBLEM: A SSL CertificateIP does not exist
Step 6 failed -603.


Note: Occasionally multiple problems will be solved with a single fix.

Fixable problems found: 1
Problems fixed: 0
Un-fixable problems found: 0


---------------------------------------------------------------------------
PKIDiag 2.78 -- (compiled Jul 18 2005 17:19:11).
(Check the end of the log for the last repair results)
Current Time: Wed Dec 21 12:22:07 2005
User logged-in as: admin.fechs.
Fixing mode
Rekey mode
Re-key when necessary

--> Server Name = 'FECHS1'
---------------------------------------------------------------------------

Step 1 Verifying the Server's link to the SAS Service Object.
Server 'FECHS1.Services.FECHS' points to SAS Service object 'SAS Service
- FECHS1.Services.FECHS'
Step 1 succeeded.

Step 2 Verifying the SAS Service Object
SAS Service object 'SAS Service - FECHS1.Services.FECHS' is backlinked
to server 'FECHS1.Services.FECHS'.
Step 2 succeeded.

Step 3 Verifying the links to the KMOs
Reading the links for SAS Service object 'SAS Service -
FECHS1.Services.FECHS'.
--> No KMOs are linked to Service object 'SAS Service - FECHS1.Services.FECHS'.
Step 3 succeeded.

Step 4 Verifying the KMOs
---> Testing KMO 'SSL CertificateDNS - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'DNS AG fechs2\.fechs\.sa\.edu\.au - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'SSL CertificateIP - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'IP AG 10\.60\.88\.3 - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'DNS AG fechs3\.fechs\.sa\.edu\.au - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'SSL CertificateDNS - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'DNS AG FECHS3 - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'SSL CertificateIP - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'IP AG 10\.60\.88\.10 - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

Step 4 succeeded.

Step 5 Re-verifying the links to the KMOs
Reading the links for SAS Service object 'SAS Service -
FECHS1.Services.FECHS'.
--> No KMOs are linked to Service object 'SAS Service - FECHS1.Services.FECHS'.
Step 5 succeeded.

Step 6 Creating IP and DNS Certificates if necessary.
--> Number of Server IP addresses = 1
--> The default IP address is: 10.60.88.2
PROBLEM: A SSL CertificateIP does not exist
Step 6 failed -603.


Note: Occasionally multiple problems will be solved with a single fix.

Fixable problems found: 1
Problems fixed: 0
Un-fixable problems found: 0


---------------------------------------------------------------------------
PKIDiag 2.78 -- (compiled Jul 18 2005 17:19:11).
(Check the end of the log for the last repair results)
Current Time: Wed Dec 21 12:22:24 2005
User logged-in as: admin.fechs.
Fixing mode
Rekey mode
Always Re-key

--> Server Name = 'FECHS1'
---------------------------------------------------------------------------

Step 1 Verifying the Server's link to the SAS Service Object.
Server 'FECHS1.Services.FECHS' points to SAS Service object 'SAS Service
- FECHS1.Services.FECHS'
Step 1 succeeded.

Step 2 Verifying the SAS Service Object
SAS Service object 'SAS Service - FECHS1.Services.FECHS' is backlinked
to server 'FECHS1.Services.FECHS'.
Step 2 succeeded.

Step 3 Verifying the links to the KMOs
Reading the links for SAS Service object 'SAS Service -
FECHS1.Services.FECHS'.
--> No KMOs are linked to Service object 'SAS Service - FECHS1.Services.FECHS'.
Step 3 succeeded.

Step 4 Verifying the KMOs
---> Testing KMO 'SSL CertificateDNS - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'DNS AG fechs2\.fechs\.sa\.edu\.au - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'SSL CertificateIP - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'IP AG 10\.60\.88\.3 - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'DNS AG fechs3\.fechs\.sa\.edu\.au - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'SSL CertificateDNS - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'DNS AG FECHS3 - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'SSL CertificateIP - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'IP AG 10\.60\.88\.10 - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

Step 4 succeeded.

Step 5 Re-verifying the links to the KMOs
Reading the links for SAS Service object 'SAS Service -
FECHS1.Services.FECHS'.
--> No KMOs are linked to Service object 'SAS Service - FECHS1.Services.FECHS'.
Step 5 succeeded.

Step 6 Creating IP and DNS Certificates if necessary.
--> Number of Server IP addresses = 1
--> The default IP address is: 10.60.88.2
PROBLEM: A SSL CertificateIP does not exist
Step 6 failed -603.


Note: Occasionally multiple problems will be solved with a single fix.

Fixable problems found: 1
Problems fixed: 0
Un-fixable problems found: 0


---------------------------------------------------------------------------
PKIDiag 2.78 -- (compiled Jul 18 2005 17:19:11).
(Check the end of the log for the last repair results)
Current Time: Wed Dec 21 12:22:36 2005
User logged-in as: admin.fechs.
Fixing mode
Rename and create mode
Rename and create when necessary

--> Server Name = 'FECHS1'
---------------------------------------------------------------------------

Step 1 Verifying the Server's link to the SAS Service Object.
Server 'FECHS1.Services.FECHS' points to SAS Service object 'SAS Service
- FECHS1.Services.FECHS'
Step 1 succeeded.

Step 2 Verifying the SAS Service Object
SAS Service object 'SAS Service - FECHS1.Services.FECHS' is backlinked
to server 'FECHS1.Services.FECHS'.
Step 2 succeeded.

Step 3 Verifying the links to the KMOs
Reading the links for SAS Service object 'SAS Service -
FECHS1.Services.FECHS'.
--> No KMOs are linked to Service object 'SAS Service - FECHS1.Services.FECHS'.
Step 3 succeeded.

Step 4 Verifying the KMOs
---> Testing KMO 'SSL CertificateDNS - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'DNS AG fechs2\.fechs\.sa\.edu\.au - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'SSL CertificateIP - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'IP AG 10\.60\.88\.3 - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'DNS AG fechs3\.fechs\.sa\.edu\.au - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'SSL CertificateDNS - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'DNS AG FECHS3 - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'SSL CertificateIP - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'IP AG 10\.60\.88\.10 - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

Step 4 succeeded.

Step 5 Re-verifying the links to the KMOs
Reading the links for SAS Service object 'SAS Service -
FECHS1.Services.FECHS'.
--> No KMOs are linked to Service object 'SAS Service - FECHS1.Services.FECHS'.
Step 5 succeeded.

Step 6 Creating IP and DNS Certificates if necessary.
--> Number of Server IP addresses = 1
--> The default IP address is: 10.60.88.2
PROBLEM: A SSL CertificateIP does not exist
Step 6 failed -603.


Note: Occasionally multiple problems will be solved with a single fix.

Fixable problems found: 1
Problems fixed: 0
Un-fixable problems found: 0


---------------------------------------------------------------------------
PKIDiag 2.78 -- (compiled Jul 18 2005 17:19:11).
(Check the end of the log for the last repair results)
Current Time: Wed Dec 21 12:22:47 2005
User logged-in as: admin.fechs.
Fixing mode
Rename and create mode
Always Re-key

--> Server Name = 'FECHS1'
---------------------------------------------------------------------------

Step 1 Verifying the Server's link to the SAS Service Object.
Server 'FECHS1.Services.FECHS' points to SAS Service object 'SAS Service
- FECHS1.Services.FECHS'
Step 1 succeeded.

Step 2 Verifying the SAS Service Object
SAS Service object 'SAS Service - FECHS1.Services.FECHS' is backlinked
to server 'FECHS1.Services.FECHS'.
Step 2 succeeded.

Step 3 Verifying the links to the KMOs
Reading the links for SAS Service object 'SAS Service -
FECHS1.Services.FECHS'.
--> No KMOs are linked to Service object 'SAS Service - FECHS1.Services.FECHS'.
Step 3 succeeded.

Step 4 Verifying the KMOs
---> Testing KMO 'SSL CertificateDNS - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'DNS AG fechs2\.fechs\.sa\.edu\.au - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'SSL CertificateIP - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'IP AG 10\.60\.88\.3 - FECHS2.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'DNS AG fechs3\.fechs\.sa\.edu\.au - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'SSL CertificateDNS - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'DNS AG FECHS3 - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'SSL CertificateIP - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

---> Testing KMO 'IP AG 10\.60\.88\.10 - FECHS3.Services.FECHS'.
Rights check -- OK.
Back link -- Belongs to a different server -- Ignoring this KMO.

Step 4 succeeded.

Step 5 Re-verifying the links to the KMOs
Reading the links for SAS Service object 'SAS Service -
FECHS1.Services.FECHS'.
--> No KMOs are linked to Service object 'SAS Service - FECHS1.Services.FECHS'.
Step 5 succeeded.

Step 6 Creating IP and DNS Certificates if necessary.
--> Number of Server IP addresses = 1
--> The default IP address is: 10.60.88.2
PROBLEM: A SSL CertificateIP does not exist
Step 6 failed -603.


Note: Occasionally multiple problems will be solved with a single fix.

Fixable problems found: 1
Problems fixed: 0
Un-fixable problems found: 0

Multiple restarts, can't seem to get Apache loaded, or even manually
installing the Certificates in C1. Desperate times as I have a couple days
left before this client needs me out and I still need to put on ZENworks 7
and configure it as well as DHCP and iPrint.
Labels (2)
0 Likes
5 Replies
Anonymous_User Absent Member.
Absent Member.

iManager and Apache issues

to add; the error during installation was;

>>PKI Error
>>The PKI Install was unable to create the Organizational Certificate
>>Authority. Error Code -603. Do you want to retry?


I noticed this fix in another thread;

>>I deleted my CA object, and all my server certifictes, and then
>>reinstalled Certificate server.


I would like to avoid this as it may break the other working versions of
iManager in the tree.
0 Likes
Anonymous_User Absent Member.
Absent Member.

Re: iManager and Apache issues

And old NW51 trick I used might help you out here. If I'm reading those
logs right, part of hte problem is that the SAS object isn't created or
linked correctly. To get it back...

http://support.novell.com/techcenter/search/Docs/Tids/Solutions/10063314.html

That should get the SAS error cleared up. Once that's done, recreating the
certificates should work. You MAY have to delete and recreate the
CertificateDNS and CertificateIP certs through PKIDIAG or manually.

--
Novell, it does a network good

0 Likes
Anonymous_User Absent Member.
Absent Member.

Re: iManager and Apache issues

Thankyou, morning is still a fair way away (being from Australia), I have
your solution printed and will test tomorrow. Any other solutions will be
appreciated.

> And old NW51 trick I used might help you out here. If I'm reading those
> logs right, part of hte problem is that the SAS object isn't created or
> linked correctly. To get it back...
>
> http://support.novell.com/techcenter/search/Docs/Tids/Solutions/10063314.html
>
> That should get the SAS error cleared up. Once that's done, recreating the
> certificates should work. You MAY have to delete and recreate the
> CertificateDNS and CertificateIP certs through PKIDIAG or manually.
>
> --
> Novell, it does a network good
>

0 Likes
Anonymous_User Absent Member.
Absent Member.

iManager and Apache issues

Deleted the CA and all certificates, re-installed Certificates, that went
fine, ran pkidiag on all servers, that went fine, Apache not loading on
startup however, everything ok inside autoexec.ncf.

> Tree consists of 1 x NW65SP4a server, 2 x OES_SP1 server. First 2 servers
> removal of DS went fine (previously was NetWare 6.0 SP5), 3rd and final
> server, removal of DS (NetWare 6.0 SP5), removed all associated objects in
> NWADMIN. Fresh install of OES_SP1 overlay, all went fine except when it
> comes to installing Certificates, had an error I couldn't get pass so I had
> to go on without installing certificates. Server comes up, no Apache is
> loaded, can't use iManager to install license or other duties. Run PKIDiag
> 2.78 over the server, see below;
>
> ---------------------------------------------------------------------------
> PKIDiag 2.78 -- (compiled Jul 18 2005 17:19:11).
> (Check the end of the log for the last repair results)
> Current Time: Wed Dec 21 11:33:20 2005
> User logged-in as: admin.fechs.
> Fixing mode
> Rename and create mode
> Rename and create when necessary
>
> --> Server Name = 'FECHS1'
> ---------------------------------------------------------------------------
>
> Step 1 Verifying the Server's link to the SAS Service Object.
> Server 'FECHS1.Services.FECHS' points to SAS Service object 'SAS Service
> - FECHS1.Services.FECHS'
> Step 1 succeeded.
>
> Step 2 Verifying the SAS Service Object
> SAS Service object 'SAS Service - FECHS1.Services.FECHS' is backlinked
> to server 'FECHS1.Services.FECHS'.
> Step 2 succeeded.
>
> Step 3 Verifying the links to the KMOs
> Reading the links for SAS Service object 'SAS Service -
> FECHS1.Services.FECHS'.
> --> No KMOs are linked to Service object 'SAS Service -

FECHS1.Services.FECHS'.
> Step 3 succeeded.
>
> Step 4 Verifying the KMOs
> ---> Testing KMO 'SSL CertificateDNS - FECHS2.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'DNS AG fechs2\.fechs\.sa\.edu\.au - FECHS2.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'SSL CertificateIP - FECHS2.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'IP AG 10\.60\.88\.3 - FECHS2.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'DNS AG fechs3\.fechs\.sa\.edu\.au - FECHS3.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'SSL CertificateDNS - FECHS3.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'DNS AG FECHS3 - FECHS3.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'SSL CertificateIP - FECHS3.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'IP AG 10\.60\.88\.10 - FECHS3.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> Step 4 succeeded.
>
> Step 5 Re-verifying the links to the KMOs
> Reading the links for SAS Service object 'SAS Service -
> FECHS1.Services.FECHS'.
> --> No KMOs are linked to Service object 'SAS Service -

FECHS1.Services.FECHS'.
> Step 5 succeeded.
>
> Step 6 Creating IP and DNS Certificates if necessary.
> --> Number of Server IP addresses = 1
> --> The default IP address is: 10.60.88.2
> PROBLEM: A SSL CertificateIP does not exist
> Step 6 failed -603.
>
>
> Note: Occasionally multiple problems will be solved with a single fix.
>
> Fixable problems found: 1
> Problems fixed: 0
> Un-fixable problems found: 0
>
>
> ---------------------------------------------------------------------------
> PKIDiag 2.78 -- (compiled Jul 18 2005 17:19:11).
> (Check the end of the log for the last repair results)
> Current Time: Wed Dec 21 11:34:00 2005
> User logged-in as: admin.fechs.
> Fixing mode
> Rekey mode
> Re-key when necessary
>
> --> Server Name = 'FECHS1'
> ---------------------------------------------------------------------------
>
> Step 1 Verifying the Server's link to the SAS Service Object.
> Server 'FECHS1.Services.FECHS' points to SAS Service object 'SAS Service
> - FECHS1.Services.FECHS'
> Step 1 succeeded.
>
> Step 2 Verifying the SAS Service Object
> SAS Service object 'SAS Service - FECHS1.Services.FECHS' is backlinked
> to server 'FECHS1.Services.FECHS'.
> Step 2 succeeded.
>
> Step 3 Verifying the links to the KMOs
> Reading the links for SAS Service object 'SAS Service -
> FECHS1.Services.FECHS'.
> --> No KMOs are linked to Service object 'SAS Service -

FECHS1.Services.FECHS'.
> Step 3 succeeded.
>
> Step 4 Verifying the KMOs
> ---> Testing KMO 'SSL CertificateDNS - FECHS2.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'DNS AG fechs2\.fechs\.sa\.edu\.au - FECHS2.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'SSL CertificateIP - FECHS2.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'IP AG 10\.60\.88\.3 - FECHS2.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'DNS AG fechs3\.fechs\.sa\.edu\.au - FECHS3.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'SSL CertificateDNS - FECHS3.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'DNS AG FECHS3 - FECHS3.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'SSL CertificateIP - FECHS3.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'IP AG 10\.60\.88\.10 - FECHS3.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> Step 4 succeeded.
>
> Step 5 Re-verifying the links to the KMOs
> Reading the links for SAS Service object 'SAS Service -
> FECHS1.Services.FECHS'.
> --> No KMOs are linked to Service object 'SAS Service -

FECHS1.Services.FECHS'.
> Step 5 succeeded.
>
> Step 6 Creating IP and DNS Certificates if necessary.
> --> Number of Server IP addresses = 1
> --> The default IP address is: 10.60.88.2
> PROBLEM: A SSL CertificateIP does not exist
> Step 6 failed -603.
>
>
> Note: Occasionally multiple problems will be solved with a single fix.
>
> Fixable problems found: 1
> Problems fixed: 0
> Un-fixable problems found: 0
>
>
> ---------------------------------------------------------------------------
> PKIDiag 2.78 -- (compiled Jul 18 2005 17:19:11).
> (Check the end of the log for the last repair results)
> Current Time: Wed Dec 21 11:35:17 2005
> User logged-in as: admin.fechs.
> Fixing mode
> Rename and create mode
> Always Re-key
>
> --> Server Name = 'FECHS1'
> ---------------------------------------------------------------------------
>
> Step 1 Verifying the Server's link to the SAS Service Object.
> Server 'FECHS1.Services.FECHS' points to SAS Service object 'SAS Service
> - FECHS1.Services.FECHS'
> Step 1 succeeded.
>
> Step 2 Verifying the SAS Service Object
> SAS Service object 'SAS Service - FECHS1.Services.FECHS' is backlinked
> to server 'FECHS1.Services.FECHS'.
> Step 2 succeeded.
>
> Step 3 Verifying the links to the KMOs
> Reading the links for SAS Service object 'SAS Service -
> FECHS1.Services.FECHS'.
> --> No KMOs are linked to Service object 'SAS Service -

FECHS1.Services.FECHS'.
> Step 3 succeeded.
>
> Step 4 Verifying the KMOs
> ---> Testing KMO 'SSL CertificateDNS - FECHS2.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'DNS AG fechs2\.fechs\.sa\.edu\.au - FECHS2.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'SSL CertificateIP - FECHS2.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'IP AG 10\.60\.88\.3 - FECHS2.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'DNS AG fechs3\.fechs\.sa\.edu\.au - FECHS3.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'SSL CertificateDNS - FECHS3.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'DNS AG FECHS3 - FECHS3.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'SSL CertificateIP - FECHS3.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'IP AG 10\.60\.88\.10 - FECHS3.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> Step 4 succeeded.
>
> Step 5 Re-verifying the links to the KMOs
> Reading the links for SAS Service object 'SAS Service -
> FECHS1.Services.FECHS'.
> --> No KMOs are linked to Service object 'SAS Service -

FECHS1.Services.FECHS'.
> Step 5 succeeded.
>
> Step 6 Creating IP and DNS Certificates if necessary.
> --> Number of Server IP addresses = 1
> --> The default IP address is: 10.60.88.2
> PROBLEM: A SSL CertificateIP does not exist
> Step 6 failed -603.
>
>
> Note: Occasionally multiple problems will be solved with a single fix.
>
> Fixable problems found: 1
> Problems fixed: 0
> Un-fixable problems found: 0
>
>
> ---------------------------------------------------------------------------
> PKIDiag 2.78 -- (compiled Jul 18 2005 17:19:11).
> (Check the end of the log for the last repair results)
> Current Time: Wed Dec 21 12:02:58 2005
> User logged-in as: admin.fechs.
> Fixing mode
> Rekey mode
> Always Re-key
>
> --> Server Name = 'FECHS1'
> ---------------------------------------------------------------------------
>
> Step 1 Verifying the Server's link to the SAS Service Object.
> Server 'FECHS1.Services.FECHS' points to SAS Service object 'SAS Service
> - FECHS1.Services.FECHS'
> Step 1 succeeded.
>
> Step 2 Verifying the SAS Service Object
> SAS Service object 'SAS Service - FECHS1.Services.FECHS' is backlinked
> to server 'FECHS1.Services.FECHS'.
> Step 2 succeeded.
>
> Step 3 Verifying the links to the KMOs
> Reading the links for SAS Service object 'SAS Service -
> FECHS1.Services.FECHS'.
> --> No KMOs are linked to Service object 'SAS Service -

FECHS1.Services.FECHS'.
> Step 3 succeeded.
>
> Step 4 Verifying the KMOs
> ---> Testing KMO 'SSL CertificateDNS - FECHS2.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'DNS AG fechs2\.fechs\.sa\.edu\.au - FECHS2.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'SSL CertificateIP - FECHS2.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'IP AG 10\.60\.88\.3 - FECHS2.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'DNS AG fechs3\.fechs\.sa\.edu\.au - FECHS3.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'SSL CertificateDNS - FECHS3.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'DNS AG FECHS3 - FECHS3.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'SSL CertificateIP - FECHS3.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'IP AG 10\.60\.88\.10 - FECHS3.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> Step 4 succeeded.
>
> Step 5 Re-verifying the links to the KMOs
> Reading the links for SAS Service object 'SAS Service -
> FECHS1.Services.FECHS'.
> --> No KMOs are linked to Service object 'SAS Service -

FECHS1.Services.FECHS'.
> Step 5 succeeded.
>
> Step 6 Creating IP and DNS Certificates if necessary.
> --> Number of Server IP addresses = 1
> --> The default IP address is: 10.60.88.2
> PROBLEM: A SSL CertificateIP does not exist
> Step 6 failed -603.
>
>
> Note: Occasionally multiple problems will be solved with a single fix.
>
> Fixable problems found: 1
> Problems fixed: 0
> Un-fixable problems found: 0
>
>
> ---------------------------------------------------------------------------
> PKIDiag 2.78 -- (compiled Jul 18 2005 17:19:11).
> (Check the end of the log for the last repair results)
> Current Time: Wed Dec 21 12:11:39 2005
> User logged-in as: Admin.fechs.
> Fixing mode
> Rekey mode
> Re-key when necessary
>
> --> Server Name = 'FECHS1'
> ---------------------------------------------------------------------------
>
> Step 1 Verifying the Server's link to the SAS Service Object.
> Server 'FECHS1.Services.FECHS' points to SAS Service object 'SAS Service
> - FECHS1.Services.FECHS'
> Step 1 succeeded.
>
> Step 2 Verifying the SAS Service Object
> SAS Service object 'SAS Service - FECHS1.Services.FECHS' is backlinked
> to server 'FECHS1.Services.FECHS'.
> Step 2 succeeded.
>
> Step 3 Verifying the links to the KMOs
> Reading the links for SAS Service object 'SAS Service -
> FECHS1.Services.FECHS'.
> --> No KMOs are linked to Service object 'SAS Service -

FECHS1.Services.FECHS'.
> Step 3 succeeded.
>
> Step 4 Verifying the KMOs
> ---> Testing KMO 'SSL CertificateDNS - FECHS2.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'DNS AG fechs2\.fechs\.sa\.edu\.au - FECHS2.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'SSL CertificateIP - FECHS2.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'IP AG 10\.60\.88\.3 - FECHS2.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'DNS AG fechs3\.fechs\.sa\.edu\.au - FECHS3.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'SSL CertificateDNS - FECHS3.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'DNS AG FECHS3 - FECHS3.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'SSL CertificateIP - FECHS3.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'IP AG 10\.60\.88\.10 - FECHS3.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> Step 4 succeeded.
>
> Step 5 Re-verifying the links to the KMOs
> Reading the links for SAS Service object 'SAS Service -
> FECHS1.Services.FECHS'.
> --> No KMOs are linked to Service object 'SAS Service -

FECHS1.Services.FECHS'.
> Step 5 succeeded.
>
> Step 6 Creating IP and DNS Certificates if necessary.
> --> Number of Server IP addresses = 1
> --> The default IP address is: 10.60.88.2
> PROBLEM: A SSL CertificateIP does not exist
> Step 6 failed -603.
>
>
> Note: Occasionally multiple problems will be solved with a single fix.
>
> Fixable problems found: 1
> Problems fixed: 0
> Un-fixable problems found: 0
>
>
> ---------------------------------------------------------------------------
> PKIDiag 2.78 -- (compiled Jul 18 2005 17:19:11).
> (Check the end of the log for the last repair results)
> Current Time: Wed Dec 21 12:12:53 2005
> User logged-in as: admin.fechs.
> Fixing mode
> Rekey mode
> Always Re-key
>
> --> Server Name = 'FECHS1'
> ---------------------------------------------------------------------------
>
> Step 1 Verifying the Server's link to the SAS Service Object.
> Step 1 failed -601.
>
> Step 2 Verifying the SAS Service Object
> PROBLEM: A SAS Service object was not found.
> FIX: Successfully created and linked SAS Service object 'SAS Service -
> FECHS1.Services.FECHS' to 'FECHS1.Services.FECHS'.
> PROBLEM: SAS Service object 'SAS Service - FECHS1.Services.FECHS' does not
> have Read All Attribute rights to itself.'
> Fix -->Successfully gave rights to the SAS Service object.
> Step 2 succeeded.
>
> Step 3 Verifying the links to the KMOs
> Reading the links for SAS Service object 'SAS Service -
> FECHS1.Services.FECHS'.
> --> No KMOs are linked to Service object 'SAS Service -

FECHS1.Services.FECHS'.
> Step 3 succeeded.
>
> Step 4 Verifying the KMOs
> ---> Testing KMO 'SSL CertificateDNS - FECHS2.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'DNS AG fechs2\.fechs\.sa\.edu\.au - FECHS2.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'SSL CertificateIP - FECHS2.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'IP AG 10\.60\.88\.3 - FECHS2.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'DNS AG fechs3\.fechs\.sa\.edu\.au - FECHS3.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'SSL CertificateDNS - FECHS3.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'DNS AG FECHS3 - FECHS3.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'SSL CertificateIP - FECHS3.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'IP AG 10\.60\.88\.10 - FECHS3.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> Step 4 succeeded.
>
> Step 5 Re-verifying the links to the KMOs
> Reading the links for SAS Service object 'SAS Service -
> FECHS1.Services.FECHS'.
> --> No KMOs are linked to Service object 'SAS Service -

FECHS1.Services.FECHS'.
> Step 5 succeeded.
>
> Step 6 Creating IP and DNS Certificates if necessary.
> --> Number of Server IP addresses = 1
> --> The default IP address is: 10.60.88.2
> PROBLEM: A SSL CertificateIP does not exist
> Step 6 failed -603.
>
>
> Note: Occasionally multiple problems will be solved with a single fix.
>
> Fixable problems found: 3
> Problems fixed: 2
> Un-fixable problems found: 0
>
>
> ---------------------------------------------------------------------------
> PKIDiag 2.78 -- (compiled Jul 18 2005 17:19:11).
> (Check the end of the log for the last repair results)
> Current Time: Wed Dec 21 12:14:07 2005
> User logged-in as: admin.fechs.
> Fixing mode
> Rekey mode
> Always Re-key
>
> --> Server Name = 'FECHS1'
> ---------------------------------------------------------------------------
>
> Step 1 Verifying the Server's link to the SAS Service Object.
> Server 'FECHS1.Services.FECHS' points to SAS Service object 'SAS Service
> - FECHS1.Services.FECHS'
> Step 1 succeeded.
>
> Step 2 Verifying the SAS Service Object
> SAS Service object 'SAS Service - FECHS1.Services.FECHS' is backlinked
> to server 'FECHS1.Services.FECHS'.
> Step 2 succeeded.
>
> Step 3 Verifying the links to the KMOs
> Reading the links for SAS Service object 'SAS Service -
> FECHS1.Services.FECHS'.
> --> No KMOs are linked to Service object 'SAS Service -

FECHS1.Services.FECHS'.
> Step 3 succeeded.
>
> Step 4 Verifying the KMOs
> ---> Testing KMO 'SSL CertificateDNS - FECHS2.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'DNS AG fechs2\.fechs\.sa\.edu\.au - FECHS2.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'SSL CertificateIP - FECHS2.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'IP AG 10\.60\.88\.3 - FECHS2.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'DNS AG fechs3\.fechs\.sa\.edu\.au - FECHS3.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'SSL CertificateDNS - FECHS3.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'DNS AG FECHS3 - FECHS3.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'SSL CertificateIP - FECHS3.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'IP AG 10\.60\.88\.10 - FECHS3.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> Step 4 succeeded.
>
> Step 5 Re-verifying the links to the KMOs
> Reading the links for SAS Service object 'SAS Service -
> FECHS1.Services.FECHS'.
> --> No KMOs are linked to Service object 'SAS Service -

FECHS1.Services.FECHS'.
> Step 5 succeeded.
>
> Step 6 Creating IP and DNS Certificates if necessary.
> --> Number of Server IP addresses = 1
> --> The default IP address is: 10.60.88.2
> PROBLEM: A SSL CertificateIP does not exist
> Step 6 failed -603.
>
>
> Note: Occasionally multiple problems will be solved with a single fix.
>
> Fixable problems found: 1
> Problems fixed: 0
> Un-fixable problems found: 0
>
>
> ---------------------------------------------------------------------------
> PKIDiag 2.78 -- (compiled Jul 18 2005 17:19:11).
> (Check the end of the log for the last repair results)
> Current Time: Wed Dec 21 12:22:07 2005
> User logged-in as: admin.fechs.
> Fixing mode
> Rekey mode
> Re-key when necessary
>
> --> Server Name = 'FECHS1'
> ---------------------------------------------------------------------------
>
> Step 1 Verifying the Server's link to the SAS Service Object.
> Server 'FECHS1.Services.FECHS' points to SAS Service object 'SAS Service
> - FECHS1.Services.FECHS'
> Step 1 succeeded.
>
> Step 2 Verifying the SAS Service Object
> SAS Service object 'SAS Service - FECHS1.Services.FECHS' is backlinked
> to server 'FECHS1.Services.FECHS'.
> Step 2 succeeded.
>
> Step 3 Verifying the links to the KMOs
> Reading the links for SAS Service object 'SAS Service -
> FECHS1.Services.FECHS'.
> --> No KMOs are linked to Service object 'SAS Service -

FECHS1.Services.FECHS'.
> Step 3 succeeded.
>
> Step 4 Verifying the KMOs
> ---> Testing KMO 'SSL CertificateDNS - FECHS2.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'DNS AG fechs2\.fechs\.sa\.edu\.au - FECHS2.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'SSL CertificateIP - FECHS2.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'IP AG 10\.60\.88\.3 - FECHS2.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'DNS AG fechs3\.fechs\.sa\.edu\.au - FECHS3.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'SSL CertificateDNS - FECHS3.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'DNS AG FECHS3 - FECHS3.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'SSL CertificateIP - FECHS3.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'IP AG 10\.60\.88\.10 - FECHS3.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> Step 4 succeeded.
>
> Step 5 Re-verifying the links to the KMOs
> Reading the links for SAS Service object 'SAS Service -
> FECHS1.Services.FECHS'.
> --> No KMOs are linked to Service object 'SAS Service -

FECHS1.Services.FECHS'.
> Step 5 succeeded.
>
> Step 6 Creating IP and DNS Certificates if necessary.
> --> Number of Server IP addresses = 1
> --> The default IP address is: 10.60.88.2
> PROBLEM: A SSL CertificateIP does not exist
> Step 6 failed -603.
>
>
> Note: Occasionally multiple problems will be solved with a single fix.
>
> Fixable problems found: 1
> Problems fixed: 0
> Un-fixable problems found: 0
>
>
> ---------------------------------------------------------------------------
> PKIDiag 2.78 -- (compiled Jul 18 2005 17:19:11).
> (Check the end of the log for the last repair results)
> Current Time: Wed Dec 21 12:22:24 2005
> User logged-in as: admin.fechs.
> Fixing mode
> Rekey mode
> Always Re-key
>
> --> Server Name = 'FECHS1'
> ---------------------------------------------------------------------------
>
> Step 1 Verifying the Server's link to the SAS Service Object.
> Server 'FECHS1.Services.FECHS' points to SAS Service object 'SAS Service
> - FECHS1.Services.FECHS'
> Step 1 succeeded.
>
> Step 2 Verifying the SAS Service Object
> SAS Service object 'SAS Service - FECHS1.Services.FECHS' is backlinked
> to server 'FECHS1.Services.FECHS'.
> Step 2 succeeded.
>
> Step 3 Verifying the links to the KMOs
> Reading the links for SAS Service object 'SAS Service -
> FECHS1.Services.FECHS'.
> --> No KMOs are linked to Service object 'SAS Service -

FECHS1.Services.FECHS'.
> Step 3 succeeded.
>
> Step 4 Verifying the KMOs
> ---> Testing KMO 'SSL CertificateDNS - FECHS2.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'DNS AG fechs2\.fechs\.sa\.edu\.au - FECHS2.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'SSL CertificateIP - FECHS2.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'IP AG 10\.60\.88\.3 - FECHS2.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'DNS AG fechs3\.fechs\.sa\.edu\.au - FECHS3.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'SSL CertificateDNS - FECHS3.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'DNS AG FECHS3 - FECHS3.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'SSL CertificateIP - FECHS3.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'IP AG 10\.60\.88\.10 - FECHS3.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> Step 4 succeeded.
>
> Step 5 Re-verifying the links to the KMOs
> Reading the links for SAS Service object 'SAS Service -
> FECHS1.Services.FECHS'.
> --> No KMOs are linked to Service object 'SAS Service -

FECHS1.Services.FECHS'.
> Step 5 succeeded.
>
> Step 6 Creating IP and DNS Certificates if necessary.
> --> Number of Server IP addresses = 1
> --> The default IP address is: 10.60.88.2
> PROBLEM: A SSL CertificateIP does not exist
> Step 6 failed -603.
>
>
> Note: Occasionally multiple problems will be solved with a single fix.
>
> Fixable problems found: 1
> Problems fixed: 0
> Un-fixable problems found: 0
>
>
> ---------------------------------------------------------------------------
> PKIDiag 2.78 -- (compiled Jul 18 2005 17:19:11).
> (Check the end of the log for the last repair results)
> Current Time: Wed Dec 21 12:22:36 2005
> User logged-in as: admin.fechs.
> Fixing mode
> Rename and create mode
> Rename and create when necessary
>
> --> Server Name = 'FECHS1'
> ---------------------------------------------------------------------------
>
> Step 1 Verifying the Server's link to the SAS Service Object.
> Server 'FECHS1.Services.FECHS' points to SAS Service object 'SAS Service
> - FECHS1.Services.FECHS'
> Step 1 succeeded.
>
> Step 2 Verifying the SAS Service Object
> SAS Service object 'SAS Service - FECHS1.Services.FECHS' is backlinked
> to server 'FECHS1.Services.FECHS'.
> Step 2 succeeded.
>
> Step 3 Verifying the links to the KMOs
> Reading the links for SAS Service object 'SAS Service -
> FECHS1.Services.FECHS'.
> --> No KMOs are linked to Service object 'SAS Service -

FECHS1.Services.FECHS'.
> Step 3 succeeded.
>
> Step 4 Verifying the KMOs
> ---> Testing KMO 'SSL CertificateDNS - FECHS2.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'DNS AG fechs2\.fechs\.sa\.edu\.au - FECHS2.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'SSL CertificateIP - FECHS2.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'IP AG 10\.60\.88\.3 - FECHS2.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'DNS AG fechs3\.fechs\.sa\.edu\.au - FECHS3.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'SSL CertificateDNS - FECHS3.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'DNS AG FECHS3 - FECHS3.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'SSL CertificateIP - FECHS3.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'IP AG 10\.60\.88\.10 - FECHS3.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> Step 4 succeeded.
>
> Step 5 Re-verifying the links to the KMOs
> Reading the links for SAS Service object 'SAS Service -
> FECHS1.Services.FECHS'.
> --> No KMOs are linked to Service object 'SAS Service -

FECHS1.Services.FECHS'.
> Step 5 succeeded.
>
> Step 6 Creating IP and DNS Certificates if necessary.
> --> Number of Server IP addresses = 1
> --> The default IP address is: 10.60.88.2
> PROBLEM: A SSL CertificateIP does not exist
> Step 6 failed -603.
>
>
> Note: Occasionally multiple problems will be solved with a single fix.
>
> Fixable problems found: 1
> Problems fixed: 0
> Un-fixable problems found: 0
>
>
> ---------------------------------------------------------------------------
> PKIDiag 2.78 -- (compiled Jul 18 2005 17:19:11).
> (Check the end of the log for the last repair results)
> Current Time: Wed Dec 21 12:22:47 2005
> User logged-in as: admin.fechs.
> Fixing mode
> Rename and create mode
> Always Re-key
>
> --> Server Name = 'FECHS1'
> ---------------------------------------------------------------------------
>
> Step 1 Verifying the Server's link to the SAS Service Object.
> Server 'FECHS1.Services.FECHS' points to SAS Service object 'SAS Service
> - FECHS1.Services.FECHS'
> Step 1 succeeded.
>
> Step 2 Verifying the SAS Service Object
> SAS Service object 'SAS Service - FECHS1.Services.FECHS' is backlinked
> to server 'FECHS1.Services.FECHS'.
> Step 2 succeeded.
>
> Step 3 Verifying the links to the KMOs
> Reading the links for SAS Service object 'SAS Service -
> FECHS1.Services.FECHS'.
> --> No KMOs are linked to Service object 'SAS Service -

FECHS1.Services.FECHS'.
> Step 3 succeeded.
>
> Step 4 Verifying the KMOs
> ---> Testing KMO 'SSL CertificateDNS - FECHS2.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'DNS AG fechs2\.fechs\.sa\.edu\.au - FECHS2.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'SSL CertificateIP - FECHS2.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'IP AG 10\.60\.88\.3 - FECHS2.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'DNS AG fechs3\.fechs\.sa\.edu\.au - FECHS3.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'SSL CertificateDNS - FECHS3.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'DNS AG FECHS3 - FECHS3.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'SSL CertificateIP - FECHS3.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> ---> Testing KMO 'IP AG 10\.60\.88\.10 - FECHS3.Services.FECHS'.
> Rights check -- OK.
> Back link -- Belongs to a different server -- Ignoring this KMO.
>
> Step 4 succeeded.
>
> Step 5 Re-verifying the links to the KMOs
> Reading the links for SAS Service object 'SAS Service -
> FECHS1.Services.FECHS'.
> --> No KMOs are linked to Service object 'SAS Service -

FECHS1.Services.FECHS'.
> Step 5 succeeded.
>
> Step 6 Creating IP and DNS Certificates if necessary.
> --> Number of Server IP addresses = 1
> --> The default IP address is: 10.60.88.2
> PROBLEM: A SSL CertificateIP does not exist
> Step 6 failed -603.
>
>
> Note: Occasionally multiple problems will be solved with a single fix.
>
> Fixable problems found: 1
> Problems fixed: 0
> Un-fixable problems found: 0
>
> Multiple restarts, can't seem to get Apache loaded, or even manually
> installing the Certificates in C1. Desperate times as I have a couple days
> left before this client needs me out and I still need to put on ZENworks 7
> and configure it as well as DHCP and iPrint.


0 Likes
Anonymous_User Absent Member.
Absent Member.

iManager and Apache issues

fixed by deleting the CA object and all SSL certificates for all servers as
well as all SAS objects. Removed DS from problem server, reinstalled OES
SP1, zero errors after installtion, ran pkidiag on other two servers,
Apache runs and iManager works fine now, all certificates in place.
0 Likes
The opinions expressed above are the personal opinions of the authors, not of Micro Focus. By using this site, you accept the Terms of Use and Rules of Participation. Certain versions of content ("Material") accessible here may contain branding from Hewlett-Packard Company (now HP Inc.) and Hewlett Packard Enterprise Company. As of September 1, 2017, the Material is now offered by Micro Focus, a separately owned and operated company. Any reference to the HP and Hewlett Packard Enterprise/HPE marks is historical in nature, and the HP and Hewlett Packard Enterprise/HPE marks are the property of their respective owners.