Anonymous_User Absent Member.
Absent Member.
724 views

remote access

Is it possible to have a remote access to OES (NetWare 6.5) before
autoexec.ncf loaded? For example, to see the screens, such as the logger,
output during startup.ncf or to have a remote control to the internal
debugger?
Is it possible to forward screens output to a serial cable and have a
control via it?

Labels (2)
0 Likes
1 Reply
Anonymous_User Absent Member.
Absent Member.

Re: remote access

dmoshe,

> Is it possible to have a remote access to OES (NetWare 6.5) before
> autoexec.ncf loaded? For example, to see the screens, such as the logger,
> output during startup.ncf or to have a remote control to the internal
> debugger?


You'd need a hardware card in the server to be able to do that (or an IP
based KVM). The server will not be able to send/receive while in
debugger. Dell and Compaq certainly have their own remote control cards
capable of doing it.


--
Hamish Speirs
Novell Support Forums Volunteer Sysop.

http://haitch.net

(Please, no email unless requested. Unsolicited support emails will
probably be ignored)
0 Likes
The opinions expressed above are the personal opinions of the authors, not of Micro Focus. By using this site, you accept the Terms of Use and Rules of Participation. Certain versions of content ("Material") accessible here may contain branding from Hewlett-Packard Company (now HP Inc.) and Hewlett Packard Enterprise Company. As of September 1, 2017, the Material is now offered by Micro Focus, a separately owned and operated company. Any reference to the HP and Hewlett Packard Enterprise/HPE marks is historical in nature, and the HP and Hewlett Packard Enterprise/HPE marks are the property of their respective owners.