Re: HP OO SSH ,unable to excute commands - Micro Focus Community

BabuSH · ‎2018-04-08

Unable to login to vplex and excute vplexxli commands through SSH
I am trying to achive the below mentiond sequence of steps through HP OO SSH
1.Login to vplex server through Putty ( Host IP & User name & Password)
2.It will prompt service@AUHTIFM1SV11VPX01:~>
3.Type cmd vplexcli and press enter
4.It will prompt "End User Name:"
5. Type user name as service and press enter
6. It will prompt for "Password:"
7. enter password as "root123#" press enter
8. Now it will prompt with VPlexcli:/>
7. type ls -l press enter
Note: The credentials used in step1 and Step 4 & 5 are vary

I am using HP OO 10.2x
Base CP of 1.10.0
The Operation using is: /Base/Operations/Remote Command Execution/SSH/v2.0/SSH Shell
I have passed below parametrs for this step
User Name: service
password:*****
knownHostsPolicy:allow
command:send vplexcli \r\nexpectEndsWith ":" \r\nsend ${user} \r\nsendChar 13 \r\nexpectEndsWith ":" \r\nsend ${password} \r\nsendChar 13 \r\nexpectLastLine "VPlexcli:/> " \r\nsend ls -l
characterSet:UTF-8
newlineCharacters:\r\n

I am getting below mentioned output:

{returnResult=vplexcli \r\nexpectEndsWith ":" \r\nsend ${user} \r\nsendChar 13 \r\nexpectEndsWith ":" \r\nsend Mi@Dim7T \r\nsendChar 13 \r\nexpectLastLine "VPlexcli:/> " \r\nsend ls -l

service@AUHITFM1SV01VPX01:~> vplexcli \r\nexpectEndsWith ":" \r\nsend ${user} \r
\nsendChar 13 \r\nexpectEndsWith ":" \r\nsend Mi@Dim7T \r\nsendChar 13 \r\nexpec
tLastLine "VPlexcli:/> " \r\nsend ls -l
Trying ::1...

Connected to localhost.

Escape character is '^]'.

Enter User Name: [D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D;Result=;}

After Enter User Name: it is not proocessing further. Need your help in resolving this

Regards,

Hussain

BabuSH · ‎2018-04-09

Hi All,

I have done few chnages in the command passing to SSH Shell , now it is taking me to till password prompt , from there it is not processing further,Need your help here

Command:

send vplexcli \r\n
Wait 250 send ${vplexuid}\r\n
Wait 350 send ${vplexpwd}\r\n
Wait 250 send send ls\r\n

OutPut:

{SESSION_ON=true;returnCode=0;visualized=<Frames>
<Frame index="1">vplexcli \r\n

service@AUHITFM1SV01VPX01:~> vplexcli \r\n
Trying ::1...
Connected to localhost.
Escape character is '^]'.

Enter User Name:                                                               s
ervice\r\n

Password:</Frame>
</Frames>;returnResult=vplexcli \r\n

service@AUHITFM1SV01VPX01:~> vplexcli \r\n
Trying ::1...

Connected to localhost.

Escape character is '^]'.

Enter User Name:                                                               [D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[Dservice\r\n

Password:                                                                      [D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D
;TimedOut=false;STDOUT=vplexcli \r\n

service@AUHITFM1SV01VPX01:~> vplexcli \r\n
Trying ::1...

Connected to localhost.

Escape character is '^]'.

Enter User Name:                                                               [D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[Dservice\r\n

Password:                                                                      [D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D
;Result=vplexcli \r\n

service@AUHITFM1SV01VPX01:~> vplexcli \r\n
Trying ::1...

Connected to localhost.

Escape character is '^]'.

Enter User Name:                                                               [D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[Dservice\r\n

Password:                                                                      [D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D[D
;}

Hussain

JarodMB · ‎2018-04-09

Have you tried
expectEndsWith >
send vplexcli \r\n
expectEndsWith :
send ${vplexuid}\r\n
expectEndsWith :
send ${vplexpwd}\r\n
expectEndsWith > (i dont know what your vplecli prompt value is $ > / - whatever prompt ends with put that in place of >)
send ls\r\n

BabuSH · ‎2018-04-10

Dear JarodMB,

Yes, I have tried these commands ,but didnt worked for me.

Manual Process of Login to vplex and executing commands
1. Login to vplex server 10.10.32.32
Ouputput:
   service@AUIHFTM1SV01VPX01:~>
2.Type vplexcli
Output:
Trying ::1...
Connected to localhost.
Escape character is '^]'.
Enter User Name:

3. Enter user name ad :'service' and Press enter button
Output:
   Password:
4.enter password as:Mi@Dim7T press enter
Output:
   creating logfile:/var/log/VPlex/cli/session.log_service_localhost_T25080_20180410051355
   VPlexcli:/>
5.type ls and press enter
Output:
cluster-witness clusters         data-migrations distributed-storage engines management-server monitoring notifications recoverpoint
security         system-defaults
VPlexcli:/>

Reagrds,

Hussain