Highlighted
iliadmin Respected Contributor.
Respected Contributor.
206 views

Mirroring Folder from OES11

I ran the advanced install/setup on my Vibe server to create the resource driver for a folder to be mirrored to Vibe from and OES11 server (folder on an NSS volume). It is currently set as read-only.

Not quite sure how to meet the requirement that the folder must be able to be mapped from the Vibe server. Does that mean a mount point or something else like using NFS? I cannot seem to find anything specific on setting up this part.

Setting up this type of linking is all fairly new to me. I am really in need of some step by step help here. If anyone can point me in the right direction...thanks! 

Val

 

 

 

Labels (1)
0 Likes
8 Replies
iliadmin Respected Contributor.
Respected Contributor.

Re: Mirroring Folder from OES11

Help, anyone?   This is probably a no-brainer to most people but something I've never done before so I am not sure how to go about it.  Does anyone have an idea?  I'm getting the feeling people don't use mirrored folders with Vibe!

Thanks in advance,

Val

0 Likes
iliadmin Respected Contributor.
Respected Contributor.

Re: Mirroring Folder from OES11

UGH...totally banging my head against the wall, doing the definition of insanity, etc. 

Here is my process:

I've stopped Vibe, run the install in advanced mode, cofigured a read only Resource driver 1name/title "ISOProdDev".  It is *definitely* enabled.

The path is

//servername/media/nss/DATA/Shared/Engineering\ISO - New Project Development/

I have granted both user rights and Group rights to the resource, of which I am a member of both. 

I save everything and proceed and it tells me all is well.

I restart Vibe.

I login to Vibe, and in my personal workspace I click on the cog wheel for configure this workspace, click on New Folder, add a title which is the same name as the resource driver 1 I created; I select Mirrored Files and then click on OK.

I see the new folder in my workspaces & folders section. I click on the new folder to select it, then click on the cog wheel next to it and choose edit folder. I do not see any options to configure the folder for the resource driver, root path, or resource path relative to root path.
At the bottom of the folder window I see in red
this message: "There are no resource drivers configured for this site. Please see the site administrator to configure the resource drivers for mirrored folders."

If I look in the file installer.xml on the server that holds the resource drivers I see my resource driver in there, it is all correct, enabled and looks fine.

I originally configured this resource driver as a file type, then I said well, grasping at straws, I'll try the other (webdav) even though I don't think it's correct. So went in and reconfigured the resource driver as a webdav type, and that didn't change, the above result is the same. So I set it back to the type "file".

*SIGH*  WTHeck....how do you setup mirrored folders?? Appears no one knows, there's no specific documentation.  I've spent like 3 weeks on this. Now I have management saying WTheck thinking this is a terrible choice I've made. Unfortunately I'm beginning to think the same.  It's very frustrating.  It may be obvious how to do this/what the issue is to those who know this stuff, but if I'm asking it isn't apparent to me.  I've following the documentation and it still does not work.  Seems like it should be pretty simple and straightforward🤔. Call me dumb, but help!😐

TIA

Val

0 Likes
RaveNet Trusted Contributor.
Trusted Contributor.

Re: Mirroring Folder from OES11

This does work, and I have done it in the past but it's been quite awhile.  I'll try to document some steps for you, but could take a week or two as I'm on some other projects currently.

 

A quick note that stood out from your setup notes.  Usually you'd configure it to the network unc path the same way any ncp or cifs client would connect to it, not the local filesystem.

 

update: here's an old thread that covered this.

https://community.microfocus.com/t5/Vibe-User-Discussions/Mirror-folder-of-NetWare-NSS-mount/td-p/2665766

 

update 2:  alternatively, if you have Filr, I believe you could likely setup Vibe to connect to it through webdav.  May also be able to do this using NetStorage on oes11, but it is an end of life product, don't remember if you noted trying this or not.

0 Likes
iliadmin Respected Contributor.
Respected Contributor.

Re: Mirroring Folder from OES11

Hi RaveNet,

Thanks for the reply, I am getting desperate.  I reviewed the thread and it is a bit old, not sure I I know how to translate to OES11 SP2.  I am not by any stretch a Linux/SLES guru and really need some assistance here. It's just not obvious to me how to do this, just dumb I guess!  lol

I would greatly appreciate any documentation you can provide since the official docs do not spell this step out.  As to the mention of using the network unc path, I though I was doing that--//servername/vol/folder/etc...? 

0 Likes
iliadmin Respected Contributor.
Respected Contributor.

Re: Mirroring Folder from OES11

So reading the old thread and a few others, I am thinking this is what I should be doing--please tell me what isn't correct!

TASK:  I need to mount a specific folder that resides on the data volume of my OES11 server.
I need this to be a read-only mirrored folder in Vibe that will always exist (not a temporary mount). So it needs to be re-established any time the server gets rebooted.

The remote path to the specific folder is:

oes11server/data/shared/ISO Engineering/New Product Development


Is the below steps and commands what I should be doing???

1. On the Vibe server I create a mount point:

                           mkdir /mnt/oes11server/data/oesPM


2) I mount the remote path on the Vibe Server using this command:

ncpmount -S oes11server -A 192.168.x.x -o tcp -U <oes11serveruser> -V data /mnt/oesevo/data/oesPM,ro

                           it will (should) prompt me for the password?

 

3) if all is well I can use ls from the Vibe server to see the contents of the mount point folder


4) Then I go into Vibe and create a mirrored folder to the.....mount point?

                  Not entirely sure what I now put in this step for the mirrored folder path.

 

Finally, how do I ensure I am only mapping the one folder New Product Development and not all the folders on the /data/shared/ directory?

 

Am I on the right track here? What's not correct?

TIA

Val

 

 

0 Likes
iliadmin Respected Contributor.
Respected Contributor.

Re: Mirroring Folder from OES11

Well, this has been a super disappointing experience with Micro Focus and this forum.  Crickets don't help.

I guess Vibe does not really work. I had such high hopes, and I sold those hopes to management.  They're now pretty disappointed in me and my vendor choice right now. 

0 Likes
RaveNet Trusted Contributor.
Trusted Contributor.

Re: Mirroring Folder from OES11

If you require immediate support, open a ticket with Microfocus and someone can assist.

This forum is community based and best effort, we aren't dedicated support and have our own jobs.
I do still plan on documenting those steps, but am busy on other projects.
I recommend starting by mounting your remote share via cifs or ncp and pointing your mirror folder there. You likely need to give your vibe user rights to that folder as well so the vibe app can read the files.
0 Likes
iliadmin Respected Contributor.
Respected Contributor.

Re: Mirroring Folder from OES11

Thanks, I did open a ticket already.  I will post back here the results.

0 Likes
The opinions expressed above are the personal opinions of the authors, not of Micro Focus. By using this site, you accept the Terms of Use and Rules of Participation. Certain versions of content ("Material") accessible here may contain branding from Hewlett-Packard Company (now HP Inc.) and Hewlett Packard Enterprise Company. As of September 1, 2017, the Material is now offered by Micro Focus, a separately owned and operated company. Any reference to the HP and Hewlett Packard Enterprise/HPE marks is historical in nature, and the HP and Hewlett Packard Enterprise/HPE marks are the property of their respective owners.